Day: August 27, 2020

81282-60-2, 7-Aminobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 36: 1-(4-(trifluoromethyl)-2-(piperidin-1-yl)benzyl)-3-(2,3-dihydro-2-oxobenzo[d]oxazol-7-yl)urea (scheme 1) Preparation of 1-(4-(trifluoromethyl)-2-(piperidin-1-yl)benzyl)-3-(2,3-dihydro-2-oxobenzo[d]oxazol-7-yl)urea Amine 2c (1 g, 3.8 mmol) was dissolved in 20 ml of AcOEt and at 0C triphosgene (1.13 g, 3.8 mmol) was added to the solution. The mixture was warmed at 80C for 4 hours then evaporated and the residue was dissolved in 5 ml of DMF. The solution of the isocyanate was added dropwise to a solution in DMF (10 ml) of compound 1c (390 mg, 2.6 mmol) and the mixture was warmed at 80C for 8 hours. (TLC AcOEt1 / petroleum ether 1). The solvent was evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column gave 160 mg of a white solid. Yield = 14% 1HNMR (DMSO, 200 MHz) delta 1.56 (2H, bs), 1.69 (4H, bs), 2.85 (4H, m), 4.42 (2H, d, J = 5.6 Hz), 6.66 (1H, dd, J = 8 Hz, J’ = 0.8 Hz), 7.01 (2H, m), 7.32 (1H, s), 7.44 (2H, dd, J = 7.6 Hz), 7.72 (1H, dd, J = 8.6 Hz, J’ = 1 Hz), 8.73 (1H, bs), 11.68 (1H, bs); [M+1] 435.2 (C21H21F3N4O3 requires 434.4).

The synthetic route of 81282-60-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pharmeste S.r.l.; EP2377850; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

132244-31-6, 5-Bromobenzo[d]oxazole is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A 10 mL pressure tube was charged with a mixture of oxazoles or thiazoles 1a-f (1.0 mmol),boronic acids 2a-o (1.0 mmol), FeCl3 (0.05 mmol), 1,10-Phenanthroline (0.1 mmol), DCIB(1.3 mmol), Cs2CO3 (1.5 mmol) and DMF (2 mL). The pressure tube was then sealed andheated at 100 C for 16 h. After completion of the reaction (progress was monitored by TLC;SiO2, Hexane/EtOAc = 9:1), the mixture was diluted with hot ethyl acetate (20 mL) andwater (40 mL) and extracted with ethyl acetate (3 ¡Á 10 mL). The combined organic layer waswashed with brine (2 ¡Á 10 mL) and dried over anhydrous Na2SO4. Solvent was removedunder reduced pressure and the remaining residue was purified by column chromatography over silica gel using hexane / ethyl acetate = 9:1 as an eluent to obtain the desired products3a-v in high yields.

As the paragraph descriping shows that 132244-31-6 is playing an increasingly important role.

Reference£º
Article; Vodnala, Nagaraju; Gujjarappa, Raghuram; Kabi, Arup K.; Kumar, Mohan; Beifuss, Uwe; Malakar, Chandi C.; Synlett; vol. 29; 11; (2018); p. 1469 – 1478;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.375369-14-5,6-Bromobenzo[d]oxazole,as a common compound, the synthetic route is as follows.

Example 326; N-(5-(benzo[d]oxazol-6-yl)-2-chloropyridin-3-yl)-4-fluorobenzenesulfonamide; To a microwave vial equipped with a stirbar and charged with 6-bromobenzo[d]oxazole (0.050 g, 0.25 mmol), cesium carbonate (0.25 g, 0.76 mmol), PdCl2(dppf)*DCM (0.037 g, 0.045 mmol), N-(2-chloro-5- (4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-3-yl)-4-fluorobenzenesulfonamide (0.10 g, 0.25 mmol) in THF (3 ml) was added water (0.5 ml). The vial was capped and placed into CEM Microwave for 10 minutes at 100 C, while 100 watts of energy was supplied via Powermax (Simultaneous heating while cooling technology). The progress of the reaction was monitored by LC/MS, which showed desired material in the mixture. The mixture was diluted with water and the organic layer was extracted with DCM and brine solution. The organics were collected, dried over sodium sulfate, filtered and concentrated in vacuo. The crude was recrystallized from 5:1 DCM/MeOH and Hexanes to give N-(5- (benzo[d]oxazol-6-yl)-2-chloropyridin-3-yl)-4-fluorobenzenesulfonamide (0.040 g, 39% yield) as a tan crystalline solid. MS (ESI pos. ion) m/z: 404 (MH+).

375369-14-5 6-Bromobenzo[d]oxazole 17902800, abenzoxazole compound, is more and more widely used in various.

Reference£º
Patent; AMGEN INC.; WO2009/17822; (2009); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

153403-53-3, 2-Chloro-6-fluorobenzo[d]oxazole is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 99: N-[(/5,25)-2-[(6-Fluoro-l<3-benzoxazol-2-vl)amino1cvclopentyl1-2-(3- methyl-l,2,4-oxadiazol-5-yl)benzamide To a solution of N-[(lS,2S)-2-aminocyclopentyl]-2-(3-methyl- l,2,4-oxadiazol-5- yl)benzamide hydrochloride (Intermediate 26; 100 mg, 0.310 mmol) in dry DMSO (1 ml) was added DIPEA (162 mu, 0.929 mmol) and 2-chloro-6-fluoro-l,3-benzoxazole (CAS Number 153403-53-3; 64 mg, 0.372 mmol). The reaction was subjected to microwave irradiation at 140C for 1 hour. The reaction was then purified by reverse phase preparative HPLC (acetonitrile / water with 0.1% ammonia) to afford the title compound.1H NMR (400 MHz, DMSO-d6): delta ppm 1.55 - 1.78 (m, 4 H), 2.00 - 2.12 (m, 2 H), 2.35 (s, 3 H), 4.01 - 4.12 (m, 1 H), 4.19 - 4.29 (m, 1 H), 6.91 - 7.00 (m, 1 H), 7.15 - 7.21 (m, 1 H), 7.30 - 7.36 (m, 1 H), 7.50 - 7.56 (m, 1 H), 7.59 - 7.70 (m, 2 H), 7.89 - 7.95 (m, 1 H), 8.02 - 8.09 (m, 1 H), 8.58 - 8.65 (m, 1 H)MS ES+: 422 The synthetic route of 153403-53-3 has been constantly updated, and we look forward to future research findings. Reference£º
Patent; TAKEDA CAMBRIDGE LIMITED; TAKEDA PHARMACEUTICAL COMPANY LIMITED; FIELDHOUSE, Charlotte; GLEN, Angela; ROBINSON, John Stephen; FUJIMOTO, Tatsuhiko; WO2015/55994; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4570-41-6,Benzo[d]oxazol-2-amine,as a common compound, the synthetic route is as follows.

General procedure: Oxazolone (2; 0.251 mmol, 1 eq) and amine nucleophile(0.326 mmol, 1.3 eq) was dissolved in toluene (1 mL) to aconcentration of 0.251 M. The reaction mixture was stirredat 70 C for 3 h, and concentrated in vacuo. The residuewas purified by flash column chromatography on silica gelusing n-heptane/EtOAc as the eluents to afford compound.

The synthetic route of 4570-41-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Jo, Minmi; Won, Sun-Woo; Lee, Dong Guk; Yun, Jungeon; Kim, Sunhong; Kwak, Young-Shin; Archives of Pharmacal Research; vol. 41; 5; (2018); p. 481 – 489;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.54903-16-1,2-Oxo-2,3-dihydrobenzo[d]oxazole-6-carboxylic acid,as a common compound, the synthetic route is as follows.

The product from step 2 (0.108 g, 0.6 mmol) and 2- hydroxyacetophenone (0.09 g, 0.66 mmol) were added to a round bottomed flask under nitrogen. Anhydrous pyridine (5 mL was added to it with stirring. The reaction mixture was cooled down using an ice bath. Phosphorus oxychloride (0.15 g, 0.99 mmol) was added and the reaction mixture was stirred at room temperature overnight. Pyridine was removed under vacuum and the residue was acidified with 1 N HCI (pH 4~5) and extracted with ethyl acetate. The solvent was EPO evaporated in vacuo to leave a residue which was purified by silica gel column chromatography (15 g). The eluent was a mixture of ethyl acetate and hexane in 1 :1. Fraction 1 was evaporated affording pure compound (0.0192 g, 11%).

As the paragraph descriping shows that 54903-16-1 is playing an increasingly important role.

Reference£º
Patent; RESVERLOGIX CORP.; JOHANSSON, Jan, O.; HANSEN, Henrik, C.; CHIACCHIA, Fabrizio, S.; WONG, Norman, C.W.; WO2007/16525; (2007); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

54903-16-1, 2-Oxo-2,3-dihydrobenzo[d]oxazole-6-carboxylic acid is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Into a 25-mL round-bottom flask was placed 2-oxo-2,3-dihydro-1,3-benzoxazole- 6-carboxylic acid (100 mg, 0.56 mmol, 2.35 equiv), N,N-dimethylformamide (10 mL), HOBT (135 mg, 2.00 equiv) and EDCI (191 mg, 2.00 equiv). Then benzyl 4- [[(1R,3r,5S)-3-amino-8-azabicyclo[3.2.1]octane-8-sulfonyl]methyl]piperidine-1- carboxylate (100 mg, 0.24 mmol, 1.00 equiv) was added in several portions. After complete adddition, TEA (250 mg, 5.00 equiv) was added dropwise. The resulting solution was stirred for 1 h at room temperature. The mixture was concentrated under vacuumand the residue diluted with 10 mL of H2O. This mixture was extracted with 3×10 mL of ethyl acetate and the organic layers combined. The combined extracts were washed with 2×30 mL of brine, dried, and concentrated. The residue was chromatographed on a silica gel column with dichloromethane/methanol (10/1). This resulted in 100 mg (72%) of benzyl 4-[[(1R,3r,5S)-3-(2-oxo-2,3-dihydro-1,3- benzoxazole-6-amido)-8-azabicyclo[3.2.1]octane-8-sulfonyl]methyl]piperidine-1- carboxylate as yellow oil

As the paragraph descriping shows that 54903-16-1 is playing an increasingly important role.

Reference£º
Patent; Epizyme, Inc.; Poley, Megan Allen Clunan; Kunz, Kevin Wayne; Mills, James Edward John; Mitchell, Lona Helen; munckhof, Michael John; Harvey, Darren Martin; (303 pag.)KR2017/45749; (2017); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

1750-45-4, 5-Chloro-6-hydroxybenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6-Hydroxy-5-chlorobenzo [d] oxazol-2 (3H) -one(1.8 g, 10 mmol),3-Bromomethyl-2H-1,2,3-triazole (1.8 g, 11 mmol),A mixture of potassium carbonate (2.8 g, 20 mmol) in acetonitrile (200 mL) was stirred at 70 C for 16 h,The solvent was removed in vacuo and the residue was purified by column chromatography on silica gel eluting with petroleum ether / ethyl acetate 20: 1,To give 3 – [(2H- 1,2,3 -triazol-2-yl) methyl) -5-chloro-6- hydroxybenzo [d] oxazol-2 (3H) -one as an orange solid (2.3 g, 85%)

1750-45-4 5-Chloro-6-hydroxybenzo[d]oxazol-2(3H)-one 2734, abenzoxazole compound, is more and more widely used in various.

Reference£º
Patent; Mudanjiang Medical School; Li Hailin; Wang Wei; Song Jing; Sun Zhiguo; Han Guangyu; (12 pag.)CN106928212; (2017); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

54903-16-1, 2-Oxo-2,3-dihydrobenzo[d]oxazole-6-carboxylic acid is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

i. 2-oxo-2,3-dihydro-benzooxazole-6-carbonic-acid 13 (38.6 mg, 0.22 mmol), intermediate 12 (95.5 mg, 0.22 mmol) and 4-methylmorpholine (0.72 mL, 0.66 mmol) were given to DMF (3 mL). N-(3-dimethylaminopropyl)-N’- ethylcarbodiimide hydrochloride (41.4 mg, 0.22 mmol) and 1- hydroxybenzotriazolehydrate (29,2 mg, 0.2 mmol) were added at RT. It was stirred for 15 h at RT. The reaction mixture was poured onto water and extracted twice with ethyl acetate. The pooled organic phases were dried over sodium sulphate, filtrated and concentrated in vacuo until dryness. The oily residue was comminuted with diethyl ether, and the emerging solid was filtered off. A colourless solid (14, 50.4 mg, 0.09 mmol, 44%) in high purity was yielded.

The synthetic route of 54903-16-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK PATENT GMBH; SCHIEMANN, Kai; SCHULTZ, Melanie; STAEHLE, Wolfgang; WO2010/115491; (2010); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

54903-16-1, 2-Oxo-2,3-dihydrobenzo[d]oxazole-6-carboxylic acid is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a dry mixture of 27-1 (2-methoxyphenylhydrazide, 139 mg, 0.837 mmol), 27-2 (benzoxazol-2- one-6-carboxylic acid, 150 mg, 0.837 mmol), and HATU (318 mg, 0.837 mmol) was added THF (10 mL) to yield a hazy reddish solution. DIPEA (0.29 mL, 1.67 mmol) was added and the reaction was stirred at rt for 2 hr. Burgess reagent (499 mg, 2.09 mmol) was added one portion, and the reaction was heated to 60C overnight. An additional 499 mg Burgess reagent was added. and continued heating. After 4 hr, 2N KHSO4 (10 mL) was added and the resulting oily mixture was extracted 3X EtOAc. The combined organics were washed once with water, once with brine, filtered through cotton and concentrated to an orange solid which was purified by reverse phase chromatography, 20% – 60% MeCN/water/0.1% TFA to yield 67 mg 27-3(18%) MJ-T+ = 447.0. ?H NMR (400 MHz, DMSO) 8.02 – 7.97 (3H, m), 7.74 (1H, d, J=8.4 Hz), 7.64 (1H, t, J=8.2 Hz), 7.30 (1H, d, J=8.4 Hz), 7.18 (1H, t, J=7.4 Hz), 3.95 (3H, s), 3.39 (3H, s).

54903-16-1 2-Oxo-2,3-dihydrobenzo[d]oxazole-6-carboxylic acid 391472, abenzoxazole compound, is more and more widely used in various.

Reference£º
Patent; TREVENA, INC.; PITIS, Philip Michael; BOYD, Robert Eugene; DAUBERT, Tamara Ann Miskowski; HAWKINS, Michael John; LIU, Guodong; SPEERSCHNEIDER, Aimee Crombie; (355 pag.)WO2018/231745; (2018); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem