Day: September 8, 2020

701-16-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.701-16-6,5-Fluoro-2-methylbenzo[d]oxazole,as a common compound, the synthetic route is as follows.

General procedure: The SBOs were prepared by the base-catalysed condensation of the appropriate 5-halogeno-2-methylbenzoxazole with the requisite aromatic aldehyde under phase transfer conditions. In a typical experiment, equimolar quantities (5 mmol) of the starting materials were dissolved in dichloromethane (20-50 ml) in the presence of benzyltriethylammonium chloride (3 mmol) and stirred magnetically under a nitrogen atmosphere as an aqueous solution of sodium hydroxide (50%, w/v, 5 ml) was added dropwise over a period of 10 min. After being stirred for 2-36 h until analytical thin layer chromatography indicated that the reaction was complete, the mixture was diluted with water (50 ml) and the SBO was extracted with dichloromethane (3¡Á20 ml), dried (MgSO4), filtered, evaporated under reduced pressure and recrystallized from aqueous methanol or ethanol.

701-16-6 5-Fluoro-2-methylbenzo[d]oxazole 2769350, abenzoxazole compound, is more and more widely used in various.

Reference£º
Article; Ayrton, Stephen T.; Panova, Jekaterina; Michalik, Adam R.; Martin, William H.C.; Gallagher, Richard T.; Bowen, Richard D.; International Journal of Mass Spectrometry; vol. 345-347; (2013); p. 120 – 131;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.132244-31-6,5-Bromobenzo[d]oxazole,as a common compound, the synthetic route is as follows.

In the reaction flask, Under argon, a catalyst (9.9 mg, 0.025 mmol, 5 mol%), potassium tert-butoxide (0.0672 g, 0.6 mmol) DMF (3.0 ml), 5-bromobenzoxazole (99.01 mg, 0.5 mmol) was added to the carbon dioxide gas, and the reaction was stirred at 80 C for 18 hours under normal pressure. Cooled to 65 C, methyl iodide (93 mul, 1.5 mmol) was added, The reaction was stirred at 65 C for 1 hour. Cooled to room temperature, the reaction was terminated with deionized water, The reaction product was extracted with ethyl acetate and purified by column chromatography (Using a mixed solvent of ethyl acetate / petroleum ether in a volume ratio of 1:10 as a developing solvent) The yield was 85%., 132244-31-6

The synthetic route of 132244-31-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Soochow University (Suzhou); Sun Hongmei; Liu Ling; Zhu Fan; Zhou Qiaoyun; (10 pag.)CN106565623; (2017); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

5676-60-8, 2-Methylbenzo[d]oxazol-6-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5676-60-8

General procedure: To a solution of compound 3 (3.37 mmol) in DMF (10 mL), charged respective compound V (a-p) (4.04 mmol) and heated to 80 C. After3 h, TLC analysis showed complete conversion of starting materials. The reaction mixture was cooled to room temperature, charged water (30 mL) and extracted with EtOAc (2 ¡Á 20 mL). The combined organic layer was washed with water (20 mL) followed by brine and concentrated under reduced pressure to obtain gummy liquid. This crude material was triturated with MTBE to afford desired product as solid and which used as such in next step without any further purification.

5676-60-8 2-Methylbenzo[d]oxazol-6-amine 590539, abenzoxazole compound, is more and more widely used in various.

Reference£º
Article; Balraju, Vadla; Jogula, Sridhar; Krishna, Vagolu Siva; Meda, Nikhila; Sriram, Dharmarajan; Bioorganic Chemistry; vol. 100; (2020);,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5676-60-8,2-Methylbenzo[d]oxazol-6-amine,as a common compound, the synthetic route is as follows.

5676-60-8, General procedure: To a solution of compound 3 (3.37 mmol) in DMF (10 mL), charged respective compound V (a-p) (4.04 mmol) and heated to 80 C. After3 h, TLC analysis showed complete conversion of starting materials. The reaction mixture was cooled to room temperature, charged water (30 mL) and extracted with EtOAc (2 ¡Á 20 mL). The combined organic layer was washed with water (20 mL) followed by brine and concentrated under reduced pressure to obtain gummy liquid. This crude material was triturated with MTBE to afford desired product as solid and which used as such in next step without any further purification.

5676-60-8 2-Methylbenzo[d]oxazol-6-amine 590539, abenzoxazole compound, is more and more widely used in various.

Reference£º
Article; Balraju, Vadla; Jogula, Sridhar; Krishna, Vagolu Siva; Meda, Nikhila; Sriram, Dharmarajan; Bioorganic Chemistry; vol. 100; (2020);,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: IV, e.g. bromo-substituted 3H-1,3-benzoxazol-2-one, (1 eq.) was suspended in a 1:1 toluene/EtOH mixture (10 mL per mmol IV). The boronic acid V (1.5 eq.) was added followed by aq. NaCO3 (2 M, 0.55 mL per mmcl IV, 1.1 eq.). The resulting suspension was degassed undernitrogen for 10 mm, followed by addition of Pd(PPh3)4 (0.1 eq.) and heating under microwave irradiation at 100 C for 30 mm. The reaction mixture was diluted with EtOAc (40 mL per mmcl IV), and water (40 mL per mmcl IV) was added. The two phases were separated and the aqueous layer was extracted with EtOAc (2 x 40 mL per mmcl IV). The combined organic phases were dried over Na2SO4, evaporated on silica, and the compound was purified by column chromatography using the Teledyne ISCO apparatus (cyclohexane:EtOAc).The title compound was obtained according to the General Procedure II, starting from 6-bromobenzoxazolone (500 mg, 2.34 mmol) and (4-fluorophenyl)boronic acid (490 mg, 3.50mmol). White solid (450 mg, 42%). 1H NMR (400 MHz, CDCI,) 6 7.08 (m, 3H), 7.33 (dd, J = 8.1, 1.6 Hz, 1H), 7.39 (d, J = 1.4 Hz, 1H), 7.47 -7.52 (m, 2H), 7.91 (s, 1H). MS (ESI) m/z: 228 [M-H]., 19932-85-5

As the paragraph descriping shows that 19932-85-5 is playing an increasingly important role.

Reference£º
Patent; FONDAZIONE ISTITUTO ITALIANO DI TECNOLOGIA; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; UNIVERSITA’ DEGLI STUDI DI PARMA; PIOMELLI, Daniele; PIZZIRANI, Daniela; BACH, Anders; SCARPELLI, Rita; MELZIG, Laurin; MOR, Marco; (72 pag.)WO2015/173169; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6, Benzo[d]oxazol-2-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4570-41-6

Step 2:To a solution of 2,3-bis-(4-fluoro-phenyl)-propionic acid (411 mg, 1.57 mmol) and 2-aminobenzoxazole (221 mg, 1.65 mmol) in CH2Cl2 (75 mL) was added DMAP (61 mg, 0.5 mmol) and EDC.HCl (380 mg, 2 mmol).The reaction mixture was stirred at room temperature 7 days, poured onto 0.1percent aqueous HCl and extracted 3 times with CH2Cl2.The combined organic extract was dried over Na2SO4 and concentrated in vacuo.Purification by chromatography (silica, 10-15percent ethyl acetate/hexanes stepwise gradient) followed by trituration with 5percent CH2Cl2 in ether afforded N-benzooxazol-2-yl-2,3-bis-(4-fluoro-phenyl)-propionamide (289 mg, 49percent): LC/MS-ESI observed [M+H]+ 379.

The synthetic route of 4570-41-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Brotherton-Pleiss, Christine E.; Walker, Keith A. M.; US2012/149718; (2012); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.72752-81-9,Methyl 2-mercaptobenzo[d]oxazole-6-carboxylate,as a common compound, the synthetic route is as follows.,72752-81-9

To a suspension of compound 5.3 (320 g, 1.53 mol) and K2CO3 (276 g, 2 mol) in EtOAC (3 L) was added MeI (238.9 g, 1.68 mol) below 20 C. The mixture was stirred at room temperature for 12 hours. TLC (EtOAc/petroleum ether=1:3) indicated the reaction was complete. Water (2 L) was added to the mixture. The organic phase was separated, dried over Na2SO4 and concentrated to give 5.4 (320 g, 93.8%) as a pink solid.

As the paragraph descriping shows that 72752-81-9 is playing an increasingly important role.

Reference£º
Patent; TIBOTEC BVBA; US2010/305073; (2010); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

132244-31-6, 5-Bromobenzo[d]oxazole is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: 2 wt% DL-alpha-Tocopherolmethoxypolyeneglycol succinate solution (1.5 mL) was added to a mixture of 5-methoxycarbonylbenzofuran-2-MIDA boronate (200 mg, 0.604 mmol), (dtbpf)PdCl2 (32 mg, 0.048 mmol) and bromobenzene (95 mg, 0.604 mmol) under N2. Et3N (0.25 mL, 1.81 mmol) was added to thesuspension under N2. The reaction mixture was vigorously stirred at 40 C for 22 h under N2. Theresulting mixture was diluted with water to form a precipitate, which was filtered, washed with water anddissolved with CHCl3. The obtained organic solutions were dried over Na2SO4 and concentrated. Theresidue was purified by flash chromatography (SiO2, AcOEt : hexane = 30 : 70) to give 143.0 mg (94%)of white powde;, 132244-31-6

The synthetic route of 132244-31-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Sakurai, Yohji; Heterocycles; vol. 94; 7; (2017); p. 1322 – 1336;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5676-60-8,2-Methylbenzo[d]oxazol-6-amine,as a common compound, the synthetic route is as follows.,5676-60-8

INTERMEDIATE B2 7V-(4-Bromo-2-hydroxyphenyl)acetamide – -To a cooled (0 0C) suspension of 2-methyl-l,3-benzoxazol-6-amine (Intermediate Bl; 1.96 g, 13.2 mmol) in 1 M HBr (40 niL) was carefully added NaNO2 (1.38 g, 20 mmol). After stirring for 10 min, a solution of CuBr (2.92 g, 20 mmol) in water (14 mL) was added and the mixture was stirred at 0 0C for 5 min. The ice-bath was removed and the mixture was stirred overnight and then 25% aqueous ammonia (5 mL) was added. The mixture was extracted with EtOAc (500 mL) and the organic layer was concentrated. The residue was purified by flash chromatography on silica using MeOH/CHCl3 (0.05:1) as eluent. Yield 1.47 g (32%). Analytical HPLC: purity 100% (System A); LRESIMS (ESI+) m/z = 230/232 (M+H)+.

As the paragraph descriping shows that 5676-60-8 is playing an increasingly important role.

Reference£º
Patent; INOVACIA AB; WO2009/150144; (2009); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6,4570-41-6, Benzo[d]oxazol-2-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of pyridine (0.965 mL, 1 1.93 mmol), phenyl carbonochloridate (1.517 g, 9.69 mmol) in Dichloromethane (DCM) (15 mL) stirred under nitrogen at room temp was added benzo[d]oxazol-2-amine (1 g, 7.46 mmol). The reaction mixture was stirred at 30 C for 3 hr. Reaction was monitored by TLC. The reaction mixture was diluted with water(20 mL), dichloromethane (2 X 50 mL) and separated the organic layer. The organic layer was washed with saturated brine solution (25 mL), dried over anhydrous Na2S04, filtered and concentrated. The crude was triturated with 50%ether in hexane and submitted for analysis, LCMS (m/z): 255.19 [M+H]+.

As the paragraph descriping shows that 4570-41-6 is playing an increasingly important role.

Reference£º
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ELLIS, James Lamond; EVANS, Karen Anderson; FOX, Ryan Michael; MILLER, William Henry; SEEFELD, Mark Andrew; (766 pag.)WO2016/79709; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem