Day: March 18, 2021

5676-60-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-Methylbenzo[d]oxazol-6-amine, cas is 5676-60-8,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

2-Chloro-4-chlorocarbonylquinoline (0.5 g), prepared by standard methods from 2-chloroquinoline-4-carboxylic acid, was added to sodium azide in aqueous dioxan (2.1 ml 1:3) at 0 C. Acetone was then added and the mixture stirred for 16 h. Water (10 ml) was added, the precipitated solid collected by filtration and air dried to give 2-chloroquinoline-4-carbonyl azide (0.455 g). The azide (0.232 g) in toluene (10 ml) was warmed from room temperature to 75 C. and then heating continued for 1 h. After cooling to room temperature 6-amino-2-methylbenzoxazole (0.148 g) in dichloromethane (15 ml) containing 4-N,N-dimethylaminopyridine (20 mg) was added and the mixture stirred for 16 h. The precipitated solid was separated by filtration to give a solid (0.25 g). Column chromatography (silica gel, dichloromethane/methanol/ammonia mixtures) gave the title compound (0.072 g). 1H NMR delta: 5 2.60 (3H, s), 7.25 (1H, d, J=8.5 Hz), 7.61 (1H, d, J=8.5 Hz), 7.73 (1H, t, J=7.0 Hz), 7.84 (1H, t, J=6.7 Hz), 7.91 (1H, d, J=8.0 Hz), 8.05 (1H, s), 8.20 (1H, d, J=8.25 Hz), 8.28 (1H, s), 9.49 (1H, s), 9.61 (1H, s). m/z (API+): 353, 355(MH+).

The chemical industry reduces the impact on the environment during synthesis,5676-60-8,2-Methylbenzo[d]oxazol-6-amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SmithKline Beecham p.l.c.; US6699879; (2004); B1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

701-16-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Fluoro-2-methylbenzo[d]oxazole, cas is 701-16-6,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The SBOs were prepared by the base-catalysed condensation of the appropriate 5-halogeno-2-methylbenzoxazole with the requisite aromatic aldehyde under phase transfer conditions. In a typical experiment, equimolar quantities (5 mmol) of the starting materials were dissolved in dichloromethane (20-50 ml) in the presence of benzyltriethylammonium chloride (3 mmol) and stirred magnetically under a nitrogen atmosphere as an aqueous solution of sodium hydroxide (50%, w/v, 5 ml) was added dropwise over a period of 10 min. After being stirred for 2-36 h until analytical thin layer chromatography indicated that the reaction was complete, the mixture was diluted with water (50 ml) and the SBO was extracted with dichloromethane (3¡Á20 ml), dried (MgSO4), filtered, evaporated under reduced pressure and recrystallized from aqueous methanol or ethanol.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 5-Fluoro-2-methylbenzo[d]oxazole, 701-16-6

Reference£º
Article; Ayrton, Stephen T.; Panova, Jekaterina; Michalik, Adam R.; Martin, William H.C.; Gallagher, Richard T.; Bowen, Richard D.; International Journal of Mass Spectrometry; vol. 345-347; (2013); p. 120 – 131;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

It is a common heterocyclic compound, the benzoxazole compound, 7-Aminobenzo[d]oxazol-2(3H)-one, cas is 81282-60-2 its synthesis route is as follows.

A solution of 128.9 g of 3-[[bis(2-hydroxyethyl)amino]methyl]-1,1′-biphenyl in approximately 750 ml of methylethylketone prepared according to Example 1f was stirred under mild nitrogen purge. In a separate vessel 202 g of methanesulfonic anhydride was dissolved in 600 ml of methylethylketone at 10-20 C. To the solution of 3-[[bis(2-hydroxyethyl)amino]methyl]-1,1′-biphenyl in methylethylketone 212.8 g of triethylamine was added and 60 ml of methylethylketone. The solution of methanesulfonic anhydride was added in about 45-60 minutes to the 3-[[bis(2-hydroxyethyl)amino]methyl]-1,1′-biphenyl/triethylamine solution, while maintaining the temperature below 10 C. 60 ml of methylethylketone was added and the mixture was stirred for another 15 minutes, followed by drop wise addition of 109.7 g of methanesulfonic acid and addition of 60 ml of methylethylketone in order to rinse the addition vessel. 71.3 g of 7-amino-2(3H)-benzoxazolone, prepared according to Example 1e was suspended in 100 ml of methylethylketone and added to the reaction mixture followed by 60 ml of methylethylketone. The reaction mixture was heated to reflux and refluxed for 20-24 hours. After 20-24 hours of reflux 48 ml of water was added and the mixture was refluxed again for 1 hour. 420 ml of methylethylketone was added and 490 ml of methylethylketone/water was distilled of. This last step was repeated three times. 46.1 g of methanesulphonic acid was added, the mixture was refluxed for an additional hour and cooled down to room temperature in 1 hour. The mixture was further cooled down to 0-5 C. and stirred at this temperature for another hour. The solid was filtered off and, washed twice with 75 ml of cold methylethylketone, and dried at 50 C. and 100 mbar under a gentle nitrogen stream till dry. Yield about 76%.

81282-60-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,81282-60-2 ,7-Aminobenzo[d]oxazol-2(3H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Eijgendaal, Irene; Klein, Gerrit; Terhorst-Van Amstel, Maria J.L.; Zwier, Klaas; Bruins, Nico; Rigter, Hendrikus T.; Gout, Eric; Boon, Caroline; De Vries, Michiel H.; US2006/194812; (2006); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

41014-43-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Chloromethyl)benzo[d]oxazole, cas is 41014-43-1,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 2 3-[(2-Benzoxazolylmethyl)amino]-5-ethyl-6-methyl-2-(1H)-pyridinone A solution of 3-amino-5-ethyl-6-methyl-2-(1H)-pyridinone (152 mg,1.0 mmol), 2-chloromethyl-1,3-benzoxazole (1.07 mmol) and triethylamine (0.14 mL, 1.0 mmol) in acetonitrile (10 mmL) was stirred at reflux for 24 hrs. After concentrating under reduced pressure,the residue was flash chromatographed over silica gel. Elution with 5% MeOH- 95% CHCl3 gave 132 mg of product which was recrystallized from EtOH-water to give 95 mg of analytically pure product, mp 202-203C, with initial melting at 179 followed by resolidification. Anal. Calcd for

The chemical industry reduces the impact on the environment during synthesis,41014-43-1,2-(Chloromethyl)benzo[d]oxazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; MERCK & CO. INC.; EP462808; (1991); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

It is a common heterocyclic compound, the benzoxazole compound, 5-Bromobenzo[d]oxazole, cas is 132244-31-6 its synthesis route is as follows.

General procedure: A 10 mL pressure tube was charged with a mixture of oxazoles or thiazoles 1a-f (1.0 mmol),boronic acids 2a-o (1.0 mmol), FeCl3 (0.05 mmol), 1,10-Phenanthroline (0.1 mmol), DCIB(1.3 mmol), Cs2CO3 (1.5 mmol) and DMF (2 mL). The pressure tube was then sealed andheated at 100 C for 16 h. After completion of the reaction (progress was monitored by TLC;SiO2, Hexane/EtOAc = 9:1), the mixture was diluted with hot ethyl acetate (20 mL) andwater (40 mL) and extracted with ethyl acetate (3 ¡Á 10 mL). The combined organic layer waswashed with brine (2 ¡Á 10 mL) and dried over anhydrous Na2SO4. Solvent was removedunder reduced pressure and the remaining residue was purified by column chromatography over silica gel using hexane / ethyl acetate = 9:1 as an eluent to obtain the desired products3a-v in high yields.

132244-31-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,132244-31-6 ,5-Bromobenzo[d]oxazole, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Vodnala, Nagaraju; Gujjarappa, Raghuram; Kabi, Arup K.; Kumar, Mohan; Beifuss, Uwe; Malakar, Chandi C.; Synlett; vol. 29; 11; (2018); p. 1469 – 1478;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

Name is 5-Fluoro-2-methylbenzo[d]oxazole, as a common heterocyclic compound, it belongs to benzoxazole compound, and cas is 701-16-6, its synthesis route is as follows.

[0552] To a stirred solution of Comp-48e (0.27 g, 1.32 mmol) and Comp-50c (0.2 g, 1.32 mmol) in THF:t-BuOH (5 mL 4:1) was added f-BuOK (0.15 g, 1.32 mmol) at 0 C and the reaction mixture was stirred at RT for 2 h. Progress of the reaction was monitored by TLC and LCMS. After completion, the reaction mixture was poured on crushed ice and extracted with EtOAc (30 mL X 2). The combined organic layer was washed with brine, dried over anhydrous Na2SO4 and concentrated under reduced pressure. The crude compound was purified by column chromatography (silica, 100-200 mesh, 30-40% EtOAc in hexane) to afford (E)-5-fluoro-2-(2-(5-methyl-l-(l-methylpiperidin-4-yl)-lH-pyrazol-4- yl)vinyl)benzo[d]oxazole (78, 0.07 g, 15%) as pale yellow solid. (0972) [0553] HPLC purity : 99.89% (0973) [0554] MS (ESI) m/e [M+H]+/Rt %: 341.15/1.22/99.6% (0974) [0555] 1H NMR (400 MHz, DMSO-d6) delta 1.80 (d, .7=11.25 Hz, 2 H), 2.01 – 2.07 (m, 2 H), 2.08 – 2.17 (m, 2 H), 2.25 (s, 3H), 2.42 (s, 3 H), 2.91 (d, J=8.80 Hz, 2 H), 4.12 – 4.23 (m, 1 H), 6.91 (d, J=16.14 Hz, 1 H), 7.17-7.23 (m, 1 H), 7.54 (dd, J=9.05, 2.69 Hz, 1 H), 7.64 (d, J=16.14 Hz, 1 H), 7.69 (dd, J=8.80, 4.40 Hz, 1 H), 8.05 (s, 1 H).

701-16-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,701-16-6 ,5-Fluoro-2-methylbenzo[d]oxazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; ALPINE ANDROSCIENCES, INC.; PATIL, Santhosh N.; SARMA, Bugga VNBS; (148 pag.)WO2019/152731; (2019); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Bromobenzo[d]oxazol-2(3H)-one, cas is 19932-85-5,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

[0156j Triethylamine (0.72 g, 1.0 mL, 7.1 mmol) was added to a stirring a mixture of 6- bromo-2benzoxazilinone (0.89 g, 4.2 mmol) and trityichioride (1.21 g, 4.4 mmol) in CH2C12 (10 mL) for a period of 10 mm. The reaction was monitored by TLC (silica gel) and concentrated after 1 h. The concentrate was diluted with water and sonicated to form a heterogeneous solution. The resulting off-white solid was suction filtered and dried to provide 1 -trityl-6-bromo-2- benzoxazilinone (2.0 g). LCMS: rt 9.45 mm (A), purity 96 %, MS (mle) 456 (MHj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-Bromobenzo[d]oxazol-2(3H)-one, 19932-85-5

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; SINGH, Rajinder; BHAMIDIPATI, Somasekhar; DING, Pingyu; PAYAN, Donald; GELMAN, Marina; KINSELLA, Todd; WO2015/157093; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to benzoxazole compound, name is Benzo[d]oxazole-2-thiol, and cas is 2382-96-9, its synthesis route is as follows.

General procedure: Thiols ((1 mmol), 5 mmol UHP, and 4 mL acetone as solvent along with 25 mg catalyst were added to a 10-mL two-necked flask equipped with a stirrer. The progress of the reaction was monitored by TLC. After completion of the reaction, the catalyst was removed and the pure products were extracted with CH2Cl2(3 9 10 mL). The results are presented in Table 6.

2382-96-9, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,2382-96-9 ,Benzo[d]oxazole-2-thiol, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Nikoorazm, Mohsen; Ghorbani-Choghamarani, Arash; Noori, Nourolah; Research on Chemical Intermediates; vol. 42; 5; (2016); p. 4621 – 4640;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

Name is 5-Chlorobenzo[d]oxazole-2(3H)-thione, as a common heterocyclic compound, it belongs to benzoxazole compound, and cas is 22876-19-3, its synthesis route is as follows.

(iv) 47.0 g 5-chlorobenzo[d]oxazole-2-thiol were dissolved in 1300 mL CH2CI2 and 175 mL dimethylformamide at room temperature and stirring was continued until a clear solution was obtained. 26.3 mL Oxalyl chloride in 25 mL CH2CI2 was added over a period of 20 minutes (gas formation). The resulting 2,5-dichlorobenzo[22876-19-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,22876-19-3 ,5-Chlorobenzo[d]oxazole-2(3H)-thione, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; SANDOZ AG; BARTH, Roland; KAUFMANN, Marius; (97 pag.)WO2016/20404; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to benzoxazole compound, name is 2-(Chloromethyl)benzo[d]oxazole, and cas is 41014-43-1, its synthesis route is as follows.

Step E : Preparation of 3-[(benzoxazol-2-yl)methoxy]-2-methoxy-5-ethyl-6-methylpyridine A quantity of 60% sodium hydride in mineral oil (24 mg, 0.6 mmol) was added to a solution of 2-methoxy-3-hydroxy-5-ethyl-6-methylpyridine (77 mg, 0.46 mmol) in dry dimethylformamide (2 mL). After gas evolution ceased, 2-(chloromethyl) benzoxazole (100 mg, 0.6 mmol) was added and the reaction mixture warmed at 60C for one hour. The reaction was then cooled, diluted with diethyl ether, the ether extract washed with water, dried (Na2SO4), filtered and evaporated to give 151 mg of crude mixture. This mixture was flash chromatographed on silica gel, eluding with 0.5% methanol/chloroform. Combined appropriate fractions gave 46 mg (32%) of oily product.

41014-43-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,41014-43-1 ,2-(Chloromethyl)benzo[d]oxazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MERCK & CO. INC.; EP462808; (1991); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem