Day: November 12, 2021

An article Benchtop Biaryl Coupling Using Pd/Cu Cocatalysis: Application to the Synthesis of Conjugated Polymers WOS:000641296000007 published article about ARYLBORONIC ACIDS; COMPLEXES in [Minus, Matthew B.; Singleton, Josh E.] Prairie View A&M Univ, Dept Chem, Prairie View, TX 77446 USA; [Minus, Matthew B.; Moor, Sarah R.; Okeke, Brandon; Anslyn, Eric, V] Univ Texas Austin, Dept Chem, Austin, TX 78712 USA; [Pary, Fathima F.; Nirmani, L. P. T.; Nelson, Toby L.] Oklahoma State Univ, Dept Chem, Stillwater, OK 74078 USA; [Chwatko, Malgorzata; Lynd, Nathaniel A.] Univ Texas Austin, McKetta Dept Chem Engn, Austin, TX 78712 USA in 2021, Cited 16. SDS of cas: 92-86-4. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4

Typically, Suzuki couplings used in polymerizations are performed at raised temperatures in inert atmospheres. As a result, the synthesis of aromatic materials that utilize this chemistry often demands expensive and specialized equipment on an industrial scale. Herein, we describe a bimetallic methodology that exploits the distinct reactivities of palladium and copper to perform high yielding aryl-aryl dimerizations and polymerizations that can be performed on a benchtop under ambient conditions. These couplings are facile and can be performed by simple mixing in the open vessel. To demonstrate the utility of this method in the context of polymer synthesis: polyfluorene, polycarbazole, polysilafluorene, and poly(6,12-dihydrodithienoindacenodithiophene) were created at ambient temperature and open to air.

Welcome to talk about 92-86-4, If you have any questions, you can contact Minus, MB; Moor, SR; Pary, FF; Nirmani, LPT; Chwatko, M; Okeke, B; Singleton, JE; Nelson, TL; Lynd, NA; Anslyn, EV or send Email.. SDS of cas: 92-86-4

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

An article Formation and application of electrochemically active cross-linked triarylamine-siloxane films using the Piers-Rubinsztajn reaction WOS:000466432600009 published article about LIGHT-EMITTING-DIODES; HOLE-TRANSPORT MATERIALS; CHARGE INJECTION EFFICIENCY; LAYER INTERFACIAL STABILITY; PEROVSKITE SOLAR-CELLS; CONDUCTING POLYMER; HIGHLY EFFICIENT; LINKING; REDUCTION; ALCOHOLS in [Kamino, Brett A.; Szawiola, Anjuli M.; Plint, Trevor; Bender, Timothy P.] Univ Toronto, Dept Chem Engn & Appl Chem, 200 Coll St, Toronto, ON M5S 3E5, Canada; [Szawiola, Anjuli M.; Bender, Timothy P.] Univ Toronto, Dept Chem, 80 St George St, Toronto, ON M5S 3H4, Canada; [Bender, Timothy P.] Univ Toronto, Dept Mat Sci & Engn, 184 Coll St, Toronto, ON M5S 3E4, Canada; CSEM, Rue Jaquet Droz 1, CH-2002 Neuchatel, Switzerland in 2019, Cited 90. Computed Properties of C12H8Br2. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4

Cross-linked triarylamine-siloxane hybrid thin film have been formed using Piers-Rubinsztajn chemistry. Key to this approach was the use of a ring-opening reaction to prevent the evolution of volatile small molecules. A representative cyclic ether containing biphenyl triarylamine compound was synthesized and on ring-opening was shown to form a smooth, glassy, and electroactive films by cross-linking with tetrakis(dimethylsiloxy) silane (QM*4). It was found that the films were electrochemically active with low glass transition temperatures. Cross-linked films were incorporated into organic light emitting diodes (OLEDs) under various conditions and functionality within OLEDs was confirmed. Finally, the resistance of the system to dissolution (orthogonality) was considered by casting F8T2, a p-type emitting polymer, from solution on top of the cross-linked film, which formed a working OLED.

Computed Properties of C12H8Br2. Welcome to talk about 92-86-4, If you have any questions, you can contact Kamino, BA; Szawiola, AM; Plint, T; Bender, TP or send Email.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Murugan, K; Nainamalai, D; Kanagaraj, P; Nagappan, SG; Palaniswamy, S in [Murugan, Karthik; Nainamalai, Devarajan; Kanagaraj, Pavithara; Nagappan, Saravana Ganesan; Palaniswamy, Suresh] Madurai Kamaraj Univ, Sch Chem, Dept Nat Prod Chem, Supramol & Catalysis Lab, Madurai 625021, Tamil Nadu, India published Green-Synthesized Nickel Nanoparticles on Reduced Graphene Oxide as an Active and Selective Catalyst for Suzuki and Glaser-Hay Coupling Reactions in 2020, Cited 58. COA of Formula: C12H8Br2. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4.

A mild and benign methodology to syntheses biaryls and 1,3-diynes has been demonstrated using the nickel nanoparticles supported on reduced graphene oxide (RGO-Ni) as a heterogeneous catalyst which is prepared using green reagents. A series of substituted biaryls and 1,3-diynes has been synthesised in good to excellent yields through C-C homocoupling reaction of arylboronic acids and terminal alkynes respectively using 1,4-dioxane as a benign solvent. The present ligand-free catalytic system proceeds smoothly under mild conditions, avoids noble and stoichiometric metal reagents and tolerates sensitive functional groups. Also has a wide substrate scope and feasible with other nitrogen and sulphur containing heteroaryl boronic acids. Hot filtration test unambiguously proves the true heterogeneity of the catalyst and which support for the further reusability of the catalyst for several times without any change in the activity. The easy preparation and simple magnetic separation, stability and reusability reveal that as-prepared RGO-Ni as a versatile catalyst for the synthesis of polyaromatic compounds both in academia and industries. Highlights

COA of Formula: C12H8Br2. Bye, fridends, I hope you can learn more about C12H8Br2, If you have any questions, you can browse other blog as well. See you lster.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Zhao, YH; Feng, XJ; Zhang, S; Yamamoto, Y; Bao, M in [Zhao, Yuhui; Feng, Xiujuan; Zhang, Sheng; Yamamoto, Yoshinori; Bao, Ming] Dalian Univ Technol, State Key Lab Fine Chem, Dalian 116023, Peoples R China; [Yamamoto, Yoshinori] Ritsumeikan Univ, Res Org Sci & Technol, Kusatsu 5258577, Japan; [Bao, Ming] Dalian Univ Technol, Sch Chem Engn, Panjin 124221, Peoples R China published Hydrodebromination of Aromatic Bromides Catalyzed by Unsupported Nanoporous Gold: Heterolytic Cleavage of Hydrogen Molecule in 2020, Cited 46. Quality Control of 4,4′-Dibromobiphenyl. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4.

Unsupported nanoporous gold (AuNPore) is a highly efficient, practically applicable, and recyclable catalyst for hydrodebromination of aromatic bromides. The AuNPore-catalyzed hydrodebromination of aromatic bromides proceeded smoothly at relatively low hydrogen pressure and temperature to achieve good to excellent yields of the corresponding non-bromine variants. The selective hydrodebromination reaction occurred exclusively in the coexistence of chlorine atom. For the first time, a mechanistic study revealed that the H-H bond splits in a heterolysis manner on the surface of AuNPore to generate Au-H hydride species.

Welcome to talk about 92-86-4, If you have any questions, you can contact Zhao, YH; Feng, XJ; Zhang, S; Yamamoto, Y; Bao, M or send Email.. Quality Control of 4,4′-Dibromobiphenyl

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

An article A linear D-pi-A based hole transport material for high performance rigid and flexible planar organic-inorganic hybrid perovskite solar cells WOS:000498852400008 published article about LIGHT-EMITTING-DIODES; EFFICIENT; DEVICE; ADDUCT; LAYERS in [Kwon, Haeun; Reddy, Saripally Sudhaker; Arivunithi, Veera Murugan; Jin, Hyunjung; Park, Ho-Yeol; Cho, Woosum; Jin, Sung-Ho] Pusan Natl Univ, Inst Plast Informat & Energy Mat, Dept Chem Educ, Grad Dept Chem Mat, Busandaehakro 63-2, Busan 46241, South Korea; [Song, Myungkwan] Korea Inst Mat Sci, Mat Ctr Energy Convergence, Surface Technol Div, 97 Changwondaero, Chang Won 642831, Gyeongnam, South Korea in 2019, Cited 51. Quality Control of 4,4′-Dibromobiphenyl. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4

A facile and less expensive hole transport material is essential to enhance the power conversion efficiency (PCE) of perovskite solar cells (PSC) without compromising the ambient stability. Here, we designed and synthesized a new class of HTM by introducing donor-pi-acceptor (D-pi-A). The HTM was synthesized by combining the moieties of triphenylamine, biphenyl and oxadiazole derivatives as electron donating, pi-spacer and electron withdrawing moieties, respectively, named 4 ”’-(5-(4-(hexyloxy)phenyl)-1,3,4-oxadiazol-2-yl)-N,N-bis(4-methoxyphenyl)-[1,1′:4′,1 ”:4 ”,1 ”’-quaterphenyl]-4-amine (TPA-BP-OXD). The pi-pi conjugation is increased by introducing the biphenyl pi-spacer. The HTM was terminated with an OXD-based moiety and framed as a D-pi-A-based HTM that trigged improvement in the charge transportation properties due to its pi-pi interactions. We rationally investigated the HTM by characterizing its photophysical, thermal, electrochemical, and charge transport properties. The great features of the HTM stimulated us to explore it on rigid and flexible substrates as a dopant-free HTM in planar inverted-perovskite solar cells (i-PSCs). The device performance in solution processed dopant-free HTM based i-PSC devices on both rigid and flexible substrates showed PCEs of 15.46% and 12.90%, respectively. The hysteresis is negligible, which is one of the most effective results based on a TPA-BP-OXD HTM in planar i-PSCs. The device performance and stability based on the TPA-BP-OXD HTM are better due to higher extraction and transportation of holes from the perovskite material, reduced charge recombination at the interface, and enhanced hydrophobicity of the HTM to compete for a role in enhancing the stability. Overall, our findings demonstrate the potentiality of the TPA-BP-OXD based HTM in planar i-PSCs.

Welcome to talk about 92-86-4, If you have any questions, you can contact Kwon, H; Reddy, SS; Arivunithi, VM; Jin, H; Park, HY; Cho, W; Song, M; Jin, SH or send Email.. Quality Control of 4,4′-Dibromobiphenyl

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Computed Properties of C12H8Br2. Authors Lyu, H; Diercks, CS; Zhu, CH; Yaghi, OM in AMER CHEMICAL SOC published article about in [Lyu, Hao; Diercks, Christian S.; Yaghi, Omar M.] Univ Calif Berkeley, Dept Chem, Berkeley, CA 94720 USA; [Lyu, Hao; Diercks, Christian S.; Yaghi, Omar M.] Lawrence Berkeley Natl Lab, Div Mat Sci, Berkeley, CA 94720 USA; [Lyu, Hao; Diercks, Christian S.; Yaghi, Omar M.] Kavli Energy NanoSci Inst, Div Mat Sci, Berkeley, CA 94720 USA; [Yaghi, Omar M.] King Abdulaziz City Sci & Technol, UC Berkeley KACST Joint Ctr Excellence Nanomat Cl, Riyadh 11442, Saudi Arabia; [Zhu, Chenhui] Lawrence Berkeley Natl Lab, Adv Light Source, Berkeley, CA 94720 USA in 2019, Cited 24. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4

The first unsubstituted olefin-linked covalent organic framework, termed COF-701, was made by linking 2,4,6-trimethyl-1,3,5-triazine (TMT) and 4,4′-biphenyldicarbaldehyde (BPDA) through Aldol condensation. Formation of the unsubstituted olefin (-CH=CH) linkage upon reticulation is confirmed by Fourier transform infrared (FT-IR) spectroscopy and solid-state C-13 cross-polarization magic angle spinning (CP-MAS) NMR spectroscopy of the framework and of its C-13-isotope-labeled analogue. COF-701 is found to be porous (1715 m(2) g(-1)) and to retain its composition and crystallinity under both strongly acidic and basic conditions. The high chemical robustness is attributed to the unsubstituted olefin linkages. Immobilization of the strong Lewis acid BF3 center dot OEt2 in the pores of the structure yields BF3 subset of COF-701. In the material, the catalytic activity of the guest is retained, as evidenced in a benchmark Diels-Alder reaction.

Welcome to talk about 92-86-4, If you have any questions, you can contact Lyu, H; Diercks, CS; Zhu, CH; Yaghi, OM or send Email.. Computed Properties of C12H8Br2

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Kolivoska, V; Sebera, J; Sebechlebska, T; Lindner, M; Gasior, J; Meszaros, G; Mayor, M; Valasek, M; Hromadova, M in [Kolivoska, Viliam; Sebera, Jakub; Sebechlebska, Tana; Gasior, Jindrich; Hromadova, Magdalena] Czech Acad Sci, J Heyrovsky Inst Phys Chem, Dolejskova 3, Prague 18223, Czech Republic; [Sebechlebska, Tana] Comenius Univ, Fac Nat Sci, Dept Phys & Theoret Chem, Ilkovicova 6, Bratislava 84215 4, Slovakia; [Lindner, Marcin; Mayor, Marcel; Valasek, Michal] KIT, Inst Nanotechnol, POB 3640, D-76021 Karlsruhe, Germany; [Meszaros, Gabor] HAS, Res Ctr Nat Sci, Magyar Tudosok Krt 2, H-1117 Budapest, Hungary; [Mayor, Marcel] Univ Basel, Dept Chem, St Johanns Ring 19, CH-4056 Basel, Switzerland; [Mayor, Marcel] Sun Yat Sen Univ, Lehn Inst Funct Mat, Sch Chem, Guangzhou 510275, Guangdong, Peoples R China; [Lindner, Marcin] Polish Acad Sci, Inst Organ Chem, Kasprzaka 44-52, PL-01224 Warsaw, Poland published Probabilistic mapping of single molecule junction configurations as a tool to achieve the desired geometry of asymmetric tripodal molecules in 2019, Cited 29. Recommanded Product: 4,4′-Dibromobiphenyl. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4.

Four molecules containing identical tripodal anchors and p-oligophenylene molecular wires of increasing length were used to demonstrate tuning of the asymmetric molecular junction to the desired geometry by probabilistic mapping of single molecule junction configurations in a scanning tunnelling microscopy break junction experiment.

Recommanded Product: 4,4′-Dibromobiphenyl. Welcome to talk about 92-86-4, If you have any questions, you can contact Kolivoska, V; Sebera, J; Sebechlebska, T; Lindner, M; Gasior, J; Meszaros, G; Mayor, M; Valasek, M; Hromadova, M or send Email.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

An article A comparative study on NHC-functionalized ternary Se/Te-Fe-Cu compounds: synthesis, catalysis, and the effect of chalcogens WOS:000477966800040 published article about TRINUCLEAR COPPER(I) ACETYLIDES; N-HETEROCYCLIC CARBENES; CARBONYL-COMPLEXES; CLUSTERS; ELECTROCHEMISTRY; NANOPARTICLES; CHEMISTRY; TE; CONSTRUCTION; SPECTROSCOPY in [Shieh, Minghuey; Liu, Yu-Hsin; Wang, Chih-Chin; Jian, Huan; Lin, Chien-Nan; Chen, Yen-Ming; Huang, Chung-Yi] Natl Taiwan Normal Univ, Dept Chem, Taipei 11677, Taiwan in 2019, Cited 80. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4. SDS of cas: 92-86-4

A novel family of N-heterocyclic carbene (NHC)-incorporated Se-Fe-Cu compounds, bis-1,3-dimethylimidazol-2-ylidene (bis-Me-2-imy)-containing compound [(mu(4)-Se)Fe-3(CO)(9){Cu(Me-2-imy)}(2)] (2), bis-N-methyl- or bis-N-isopropyl-substituted benzimidazol-2-ylidene (bis-Me-2-bimy or bis-Pr-i(2)-bimy)-incorporated compounds [(mu(4)-Se)Fe-3(CO)(9){Cu(Me-2-bimy)}(2)] (3) or [(mu(4)-Se)Fe-3(CO)(9){Cu(Pr-i(2)-bimy)}(2)] (4), and a bis-1,3-dimethyl-4,5-dichloroimidazol-2-ylidene (bis-Me-2-Cl-2-imy)-containing compound [(mu(3)-Se)Fe-3(CO)(9){Cu(Me-2-Cl-2-imy)}(2)] (5), were synthesized in moderate yields in facile one-pot reactions of the ternary pre-designed compound [(mu(3)-Se)Fe-3(CO)(9){Cu(MeCN)}(2)] (1) with the corresponding imidazolium salts and (KOBu)-Bu-t in THF in an ice-water bath. Single-crystal X-ray analyses revealed that the Me-2-imy compound 2 or the Me-2-bimy compound 3 each exhibited a trigonal bipyramidal SeFe3(CO)(9)Cu geometry with an Fe2Cu plane further capped by a Cu(Me-2-imy) or Cu(Me-2-bimy) fragment, respectively, with one long Cu-Cu covalent bond. In addition, compound 4 also comprised a trigonal bipyramidal SeFe3(CO)(9)Cu core structure, but the second Cu(Pr-i(2)-bimy) group bridged the equatorial Fe-Fe edge with two unbonded Cu atoms, due to the presence of a sterically bulky Pr-i(2)-bimy fragment. On the other hand, the strong electron-withdrawing chloro-containing NHC compound 5 showed a comparatively open tetrahedral SeFe3(CO)(9) metal core, where two Fe-Fe edges each were further bridged by a Cu(Me-2-Cl-2-imy) fragment. Due to the nonclassical C-H center dot center dot center dot O(carbonyl) hydrogen bonds between the CO groups of the SeFe3(CO)(9)Cu-2 core and CH moieties of the neighboring NHC ligands, both compounds 2 and 3 comprised a one-dimensional network, while compounds 4 and 5 each were made up of a two-dimensional framework in the solid state, which efficiently enhanced the stability of these Se-Fe-Cu NHC compounds. Importantly, all of these synthesized Se-Fe-Cu NHC compounds 2-5 had pronounced catalytic activities for the homocoupling of arylboronic acids with high catalytic yields. Finally, these Se-containing Fe-Cu NHC compounds further represented excellent models for studying chalcogen effects in comparison to their Te analogs, as demonstrated by their catalytic performances and electrochemical behaviors, and by DFT calculations.

SDS of cas: 92-86-4. Bye, fridends, I hope you can learn more about C12H8Br2, If you have any questions, you can browse other blog as well. See you lster.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

HPLC of Formula: C12H8Br2. I found the field of Chemistry very interesting. Saw the article Reducing the Exciton Binding Energy of Donor-Acceptor-Based Conjugated Polymers to Promote Charge-Induced Reactions published in 2019, Reprint Addresses Chen, X; Wang, XC (corresponding author), Fuzhou Univ, Coll Chem, State Key Lab Photocatalysis Energy & Environm, Fuzhou 350116, Fujian, Peoples R China.. The CAS is 92-86-4. Through research, I have a further understanding and discovery of 4,4′-Dibromobiphenyl.

Exciton binding energy has been regarded as a crucial parameter for mediating charge separation in polymeric photocatalysts. Minimizing the exciton binding energy of the polymers can increase the yield of charge-carrier generation and thus improve the photocatalytic activities, but the realization of this approach remains a great challenge. Herein, a series of linear donor-acceptor conjugated polymers has been developed to minimize the exciton binding energy by modulating the charge-transfer pathway. The results reveal that the reduced energy loss of the charge-transfer state can facilitate the electron transfer from donor to acceptor, and thus, more electrons are ready for subsequent reduction reactions. The optimized polymer, FSO-FS, exhibits a remarkable photochemical performance under visible light irradiation.

Bye, fridends, I hope you can learn more about C12H8Br2, If you have any questions, you can browse other blog as well. See you lster.. HPLC of Formula: C12H8Br2

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Formula: C12H8Br2. Recently I am researching about POLYBROMINATED DIPHENYL ETHERS; DIBENZO-PARA-DIOXINS; DECABROMODIPHENYL ETHER; THERMAL-DECOMPOSITION; PHOTODEGRADATION MECHANISM; PHOTOCHEMICAL DEGRADATION; QUANTUM YIELDS; PBDES; TETRABROMOBISPHENOL; PRODUCTS, Saw an article supported by the Australian Research Council (ARC)Australian Research Council; Murdoch University, Australia. Published in ACADEMIC PRESS INC ELSEVIER SCIENCE in SAN DIEGO ,Authors: Saeed, A; Altarawneh, M; Siddique, K; Conesa, JA; Ortuno, N; Dlugogorski, BZ. The CAS is 92-86-4. Through research, I have a further understanding and discovery of 4,4′-Dibromobiphenyl

This study investigates the geometric and electronic properties of selected BFRs in their ground (S-0) and first singlet excited (S-1) states deploying methods of the density functional theory (DFT) and the time-dependent density functional theory (TDDFT). We estimate the effect of the S-0 -> S-1 transition on the elongations of the C-Br bond, identify the frontier molecular orbitals involved in the excitation process and compute partial atomic charges for the most photoreactive bromine atoms. The bromine atom attached to an who position in HBB (with regard to C-C bond; 2,2′,4,4′,6,6′-hexabromobiphenyl), TBBA (with respect to the hydroxyl group; 2,2′,6,6′-tetrabromobisphenol A), HBDE and BTBPE (in reference to C-O linkage; 2,2′,4,4′,6,6′-hexabromodiphenylether and 1,2-bis(2,4,6-tribromophenoxy)ethane, respectively) bears the highest positive atomic charge. This suggests that, these positions undergo reductive debromination reactions to produce lower brominated molecules. Debromination reactions ensue primarily in the aromatic compounds substituted with the highest number of bromine atoms owing to the largest stretching of the C-Br bond in the first excited state. The analysis of the frontier molecular orbitals indicates that, excitations of BFRs proceed via pi ->pi*, or pi ->sigma* or n ->sigma* electronic transitions. The orbital analysis reveals that, the HOMO-LUMO energy gap (EH-L) for all investigated brominesubstituted aromatic molecules falls lower (1.85-4.91 eV) than for their non-brominated analogues (3.39-8.07 eV), in both aqueous and gaseous media. The excitation energies correlate with the EH-L values. The excitation energies and EH-L values display a linear negative correlation with the number of bromine atoms attached to the molecule. Spectral analysis of the gaseous-phase systems reveals that, the highly brominated aromatics endure lower excitation energies and exhibit red shifts of their absorption bands in comparison to their lower brominated congeners. We attained a satisfactory agreement between the experimentally measured absorption peak (lambda(max)) and the theoretically predicted oscillator strength (lambda(max)) for the UV-Vis spectra. This study further confirms that, halogenated aromatics only absorb light in the UV spectral region and that effective photodegradation of these pollutants requires the presence of photocatalysts.

Formula: C12H8Br2. Welcome to talk about 92-86-4, If you have any questions, you can contact Saeed, A; Altarawneh, M; Siddique, K; Conesa, JA; Ortuno, N; Dlugogorski, BZ or send Email.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem