Category: 19932-85-5

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 121 6-Bromo-3-trityl-3 H-benzooxazol-2-one 6-Bromo-3H-benzooxazol-2-one (0.165 g, 0.77 mmol) was added portionwise into a 0 C. suspension of NaH (44.8 mg, 1 mmol, 55%) in dry DMF (4 ml). After 1 hour stirring at room temperature, a solution of triphenylmethylchloride (0.24 g, 0.85 mmol) in DMF (0.5 ml) was added. The reaction mixture was stirred 1 hour at room temperature then quenched with H2O (15 ml). The aqueous phase was extracted with ethyl acetate, the combined organic phases were washed with H2O and brine, dried over Na2SO4 and concentrated to provide 6-bromo-3-trityl-3H-benzooxazol-2-one (0.27 g, 77%) as a beige solid, MS: Mm/e=457.1 (M+H+).

19932-85-5, The synthetic route of 19932-85-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Alanine, Alexander; Buettelmann, Bernd; Neidhart, Marie-Paule H.; Jaeschke, Georg; Pinard, Emmanuel; Wyler, Rene; US2001/47031; (2001); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

A common heterocyclic compound, the benzoxazole compound, name is 6-Bromobenzo[d]oxazol-2(3H)-one,cas is 19932-85-5, mainly used in chemical industry, its synthesis route is as follows.,19932-85-5

To a solution of 6-bromo-1,3-benzoxazol-2(3H)-one (250 mg, 1.17 mmol) in anhydrous DMF (2 mL) at 0 C was added NaH (60% dispersion in mineral oil, 51.4 mg, 1.29 mmol) under nitrogen. The reaction mixture was stirred for 20 min. Then the reaction mixture was treated with (2-(chloromethoxy)ethyl)trimethylsilane (0.269 mL, 1.52 mmol) drop wise at 0 C and the resulting mixture was stirred for 1 h. The reaction mixture was warmed to 23 C, diluted with water (5 mL) and extracted with EtOAc. The combined organics were dried (Na2SO4), filtered, concentrated under reduced pressure. Purification (FCC, SiO2, 0 to 30% EtOAc/Hexane) afforded the title compound (383 mg, 95.3%).

As the rapid development of chemical substances, we look forward to future research findings about 19932-85-5

Reference£º
Patent; JANSSEN PHARMACEUTICA NV; SAVALL, Bradley M.; SWANSON, Devin M.; WU, Dongpei; AMERIKS, Michael K.; (320 pag.)WO2016/176457; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.19932-85-5,6-Bromobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

General procedure: To a stirred solution of tert-butyl 6-nitro-2-oxo-2,3-dihydro-1H-benzo[d]imidazole-1carboxylate (CAS: 438200-95-4) (630 mg, 2.26 mmol), 2-(4-(methylsulfonyl)piperazin-1-ylethanol (CAS: 72388-13-7) (940 mg, 4.52 mmol) and PPh; (11186 mg, 4.52 mmol) in THF (30 mL) under Ar atmosphere at 0 C was added DEAD (984 mg, 5.65 mmol). The reaction mixture was stirred under Ar atmosphere at 50 C overnight. The reaction mixture was diluted with H2,O (50 mL) and extracted with EtOAc (3 X 50 mL). The combined organic extracts were washed with brine (SO mL), dried over anhydrous Na2SOuq,filtered and the filtrate was concentrated. The residue was purified bysilica gel chromatography (PE: EA = 1:1, v/v). The fractions were concentrated. The residue was dissolved in PE/EA(3/1, v/v, 20 mL), stirred at room temperature for 16 h, during which time white precipitate was formed. The mixture was filtered and the filter cake was collected to give intermediate 139 (1.36 g, 59% yield) as a white solid. Intermediates 212, 213, and 214 CHCI salt) were prepared respectively via an analogous reaction protocol as described for the preparation offollowing intermediates in the column ?Method used?, 19932-85-5

19932-85-5 6-Bromobenzo[d]oxazol-2(3H)-one 29859, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; JANSSEN PHARMACEUTICA NV; JOHNSON & JOHNSON (CHINA) INVESTMENT LTD.; DAI, Xuedong; QUEROLLE, Olivier Alexis Georges; KROSKY, Daniel Jason; CAI, Wei; FU, Liqiang; KONG, Linglong; LIU, Yingtao; WAN, Zhao-Kui; HERKERT, Barbara; PANDE, Vineet; EDWARDS, James Patrick; PATRICK, Aaron Nathaniel; ANGIBAUD, Patrick Rene; PONCELET, Virginie Sophie; (488 pag.)WO2019/120209; (2019); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: One equivalent of appropriate heterocyclic derivative was dissolved in DMF. Three equivalents of potassium carbonate and 1.2 equivalent of the appropriate 3-chloropropan-1-amine derivative were added. The resulting mixture was heated at 70C until disappearance of the starting material. The reaction was monitored by TLC. After 24-96 h, the solvent was removed under reduced pressure, and water added to the residue. The crude product was extracted with dichloromethane. The combined organic fractions were washed with water and dried over magnesium sulphate. Purification by thick layer chromatography or column chromatography was performed.

19932-85-5, The synthetic route of 19932-85-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Donnier-Marechal, Marion; Carato, Pascal; Le Broc, Delphine; Furman, Christophe; Melnyk, Patricia; European Journal of Medicinal Chemistry; vol. 92; (2015); p. 575 – 582;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.19932-85-5,6-Bromobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

2-Oxo-2,3-dihydro-benzooxazole-6-carbaldehyde A solution of 6-bromo-3H-benzooxazol-2-one (0.9236 g, 4.31 micromoles) in anhydrous tetrahydrofuran (25 mL) and dimethylformamide (3 mL) under nitrogen was cooled to -78 C. before addition of n-butyllithium (2.5M in hexane) (3.8 mL, 2.2 equiv). After stirring for 10 min at -78 C., 24 mL of sec-butyllithium (1.4 M in cyclohexane, 8 equiv) was added. The reaction was stirred while slowly warming to -40 C. When this temperature was reached, the reaction was quenched by addition of methanol. The reaction mixture was concentrated in vacuo and water was added. The aqueous layer was acidified with 1N HCl (ca. pH 5) and extracted with ethyl acetate (3*50 mL), dried over sodium sulfate, filtered and concentrated to give the product, 0.6402 g (91%). MS (ESI) 164 (MH)+. 1H NMR (400 MHz, DMSO-d6) delta 9.90 (1H, s), 7.79 (1H, d, J=8.0 Hz), 7.74 (1H, s), 7.28 (1H, d, J=8.0 Hz).

19932-85-5, 19932-85-5 6-Bromobenzo[d]oxazol-2(3H)-one 29859, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Chaturvedula, Prasad V.; Chen, Ling; Civiello, Rita; Conway, Charles Mark; Degnan, Andrew P.; Dubowchik, Gene M.; Han, Xiaojun; J. Jiang, Xiang Jun; Karageorge, George N.; Luo, Guanglin; Macor, John E.; Poindexter, Graham; Tora, George; Vig, Shikha; US2004/204397; (2004); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

A common heterocyclic compound, the benzoxazole compound, name is 6-Bromobenzo[d]oxazol-2(3H)-one,cas is 19932-85-5, mainly used in chemical industry, its synthesis route is as follows.,19932-85-5

General procedure: IV, e.g. bromo-substituted 3H-1,3-benzoxazol-2-one, (1 eq.) was suspended in a 1:1 toluene/EtOH mixture (10 mL per mmol IV). The boronic acid V (1.5 eq.) was added followed by aq. NaCO3 (2 M, 0.55 mL per mmcl IV, 1.1 eq.). The resulting suspension was degassed undernitrogen for 10 mm, followed by addition of Pd(PPh3)4 (0.1 eq.) and heating under microwave irradiation at 100 C for 30 mm. The reaction mixture was diluted with EtOAc (40 mL per mmcl IV), and water (40 mL per mmcl IV) was added. The two phases were separated and the aqueous layer was extracted with EtOAc (2 x 40 mL per mmcl IV). The combined organic phases were dried over Na2SO4, evaporated on silica, and the compound was purified by column chromatography using the Teledyne ISCO apparatus (cyclohexane:EtOAc).The title compound was obtained according to the General Procedure II, starting from 6-bromobenzoxazolone (500 mg, 2.34 mmol) and (4-fluorophenyl)boronic acid (490 mg, 3.50mmol). White solid (450 mg, 42%). 1H NMR (400 MHz, CDCI,) 6 7.08 (m, 3H), 7.33 (dd, J = 8.1, 1.6 Hz, 1H), 7.39 (d, J = 1.4 Hz, 1H), 7.47 -7.52 (m, 2H), 7.91 (s, 1H). MS (ESI) m/z: 228 [M-H].

As the rapid development of chemical substances, we look forward to future research findings about 19932-85-5

Reference£º
Patent; FONDAZIONE ISTITUTO ITALIANO DI TECNOLOGIA; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; UNIVERSITA’ DEGLI STUDI DI PARMA; PIOMELLI, Daniele; PIZZIRANI, Daniela; BACH, Anders; SCARPELLI, Rita; MELZIG, Laurin; MOR, Marco; (72 pag.)WO2015/173169; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.19932-85-5,6-Bromobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

19932-85-5, To a solution of XXXV-2b (500 mg, 2.97 mmol) in dry DCM (20 mL) was added TEA (360 mg, 3.56 mmol) and Trt-Cl (992 mg, 3.56 mmol). The mixture was stuffed overnight at rt, then poured into water, extracted with DCM (50 mLx3). The combined organic layer was washed with brine, dried over anhydrous Na2SO4, and concentrated in vacuo. The residue was purified by column chromatography on silica gel (PE/EA=10/1) to afford XXXV-3b (1.2 g, 89% yield).

As the paragraph descriping shows that 19932-85-5 is playing an increasingly important role.

Reference£º
Patent; INTERMUNE, INC.; RAMPHAL, Johnnie, Y.; BUCKMAN, Brad, Owen; EMAYAN, Kumaraswamy; NICHOLAS, John, Beamond; SEIWERT, Scott, D.; WO2015/153683; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.19932-85-5,6-Bromobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

Intermediate 13: 2-oxo-2,3-dihydrobenzo[d]oxazole-6-carbonitrile To a solution of 6-bromo benzoxazolinone (2 g, 9.4 mmol) in DMF (20 mL) was added CuCN (16.79 g, 188 mmol), and the reaction was stirred at 175 C. for 6 h. The reaction progress was monitored by TLC (100% EtOAc). The reaction was diluted with EtOAc (10 mL) and filtered through Celite brand filter agent. The organic layer was concentrated and purified by column chromatography (silica gel, 0-50% EtOAc in hexanes) to give the title compound. MS (ESI pos. ion) m/z: 158.9 (MH-)., 19932-85-5

19932-85-5 6-Bromobenzo[d]oxazol-2(3H)-one 29859, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; AMGEN INC.; BISWAS, Kaustav; CHEN, Jian J.; GORE, Vijay Keshav; HARRIED, Scott; HORNE, Daniel B.; KALLER, Matthew R.; MA, Vu Van; SHAM, Kelvin; ZHONG, Wenge; US2014/45855; (2014); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

The benzoxazole compound, name is 6-Bromobenzo[d]oxazol-2(3H)-one,cas is 19932-85-5, mainly used in chemical industry, its synthesis route is as follows.,19932-85-5

To a solution of XXXV-2b (500 mg, 2.97 mmol) in dry DCM (20 mL) was added TEA (360 mg, 3.56 mmol) and Trt-Cl (992 mg, 3.56 mmol). The mixture was stuffed overnight at rt, then poured into water, extracted with DCM (50 mLx3). The combined organic layer was washed with brine, dried over anhydrous Na2SO4, and concentrated in vacuo. The residue was purified by column chromatography on silica gel (PE/EA=10/1) to afford XXXV-3b (1.2 g, 89% yield).

As the rapid development of chemical substances, we look forward to future research findings about 19932-85-5

Reference£º
Patent; INTERMUNE, INC.; RAMPHAL, Johnnie, Y.; BUCKMAN, Brad, Owen; EMAYAN, Kumaraswamy; NICHOLAS, John, Beamond; SEIWERT, Scott, D.; WO2015/153683; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 6-bromo-1 ,3-benzoxazol-2(3H)-one (2 g ; 9.34 mmol) and copper (I ) cyan ide (1 .42 g; 1 5.86 mmol) in 6 m l D M F is heated at 1 50C u nder nitrogen atmosphere for 22 hr. After cooling to room temperature, a solution of 1 .55 g (31 .6 mmol) of sodium cyanide in 32 ml water is added followed by 1 hr stirring. The system is extracted thoroughly with ethyl acetate, washed with brine, dried and concentrated in vacuo to provide 1 .5 g (93 % yield) of the title compound enough pure as to prosecute the syntesis., 19932-85-5

19932-85-5 6-Bromobenzo[d]oxazol-2(3H)-one 29859, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; ALMIRALL, S.A.; AIGUADE BOSCH, Jose; GUAL ROIG, Silvia; PRAT QUINONES, Maria; PUIG DURAN, Carlos; WO2013/68552; (2013); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem