Category: 22876-19-3

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,as a common compound, the synthetic route is as follows.

General procedure: Commercially available 5-chloro-2-mercapto benzoxazole or benzothiazole (10 mmol) and K2CO3 (15mmol) were added to 50 mL of acetone. After 10 min, appropriate 1-bromo–bromoalkane (12 mmol) was added and the mixture was stirred at room temperature for 24 h. After this time the suspension was filtered from inorganic material and the solvent was evaporated under reduced pressure. The residue was suspended in water and extracted with diethyl ether (3 ¡Á 50 mL). The combined extracts were washed with water, dried over anhydrous Na2SO4, and evaporated under reduced pressure to givein termediates 9-12 that were used without further purification for the final step. For analytical purpose,a little amount was purified by means of flash chromatography, using cyclohexane/ethyl acetate 9.5:0.5v/v as eluent. Analytical and spectral data are reported for novel compounds 9-12, 22876-19-3

22876-19-3 5-Chlorobenzo[d]oxazole-2(3H)-thione 708870, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Article; Romeo, Giuseppe; Prezzavento, Orazio; Intagliata, Sebastiano; Pittala, Valeria; Modica, Maria N.; Marrazzo, Agostino; Turnaturi, Rita; Parenti, Carmela; Chiechio, Santina; Arena, Emanuela; Campisi, Agata; Sposito, Giovanni; Salerno, Loredana; European Journal of Medicinal Chemistry; vol. 174; (2019); p. 226 – 235;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,as a common compound, the synthetic route is as follows.

(iv) 47.0 g 5-chlorobenzo[d]oxazole-2-thiol were dissolved in 1300 mL CH2CI2 and 175 mL dimethylformamide at room temperature and stirring was continued until a clear solution was obtained. 26.3 mL Oxalyl chloride in 25 mL CH2CI2 was added over a period of 20 minutes (gas formation). The resulting 2,5-dichlorobenzo[22876-19-3, 22876-19-3 5-Chlorobenzo[d]oxazole-2(3H)-thione 708870, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; SANDOZ AG; BARTH, Roland; KAUFMANN, Marius; (97 pag.)WO2016/20404; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

22876-19-3, 5-Chlorobenzo[d]oxazole-2(3H)-thione is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,22876-19-3

Thionyl Chloride (540 mL) and Dimethyl formamide (270 mL) were added to a stirred mixture of 5-Chloro-1,3-benzoxazole-2-thiol (540 g, 2.903 moles) and dichloromethane (5 liter) at 5-10 C. and stirred till clear solution was observed. The reaction mixture was then stirred at 10 C. to room temperature for 4 hour. After completion of the reaction, the mixture was poured into cold water (4 liter), neutralized with solid sodium bicarbonate (1440 g) portion wise over a period of 1 hour and extracted with dichloromethane (2*2.5 liter). The combined organic extracts were washed with brine solution, dried over anhydrous sodium sulphate (300 g) and concentrated under reduced pressure to give a crude compound. The crude material was triturated with Hexane (2*2 liter) at -20 C., filtered and and dried under reduced pressure to obtain 2,5-dichloro-1,3-benzoxazole (475 g, 88.9%) as a yellow liquid.

As the paragraph descriping shows that 22876-19-3 is playing an increasingly important role.

Reference£º
Patent; DR. REDDY’S LABORATORIES LIMTED; IQBAL, Javed; DAHANUKAR, Vilas Hareshwar; ORUGANTI, Srinivas; KANDAGATLA, Bhaskar; (23 pag.)US2016/168138; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

22876-19-3, 5-Chlorobenzo[d]oxazole-2(3H)-thione is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3: Preparation of 2, 5-dichloro-1 ,3-benzoxazole.5-chloro-1 ,3-benzoxazole-2-thiol (8.09 g, 43.6 mmol) dissolved in CHCI3 (65 mL) and stirred at ice bath for 10 minutes. Chlorine gas was bubbled into the solution for 10 minutes. The reaction mixture was further stirred at room temperature overnight. The reaction mixture was poured into ice water (70 mL) and extracted with aq. 2N NaOH (30mLx2), then ice water (30mL). The CHCI3 solution was allowed to stand for 10 minutes, then filtered through a plug of silica gel to give clear solution. The solvent was removed under reduced pressure to afford semi-oil crude product. The crude product was dissolved in CHCI3 (25 mL) and filtered through diatomaceous earth. The solvent was removed under reduced pressure to give the title compound as a solid., 22876-19-3

22876-19-3 5-Chlorobenzo[d]oxazole-2(3H)-thione 708870, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; PFIZER INC.; SPRINGER, John, Robert; VAZQUEZ, Michael, Lawrence; WO2011/77313; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

A common heterocyclic compound, the benzoxazole compound, name is 5-Chlorobenzo[d]oxazole-2(3H)-thione,cas is 22876-19-3, mainly used in chemical industry, its synthesis route is as follows.,22876-19-3

General procedure: A mixture of intermediate compound N-(3-(1H-tetrazole-5-yl) phenyl)-2-chloroacetamideand benzo[d]oxazole-2-thiol or benzo[d]thiazole-2-thiol or 2-mercapto benzimidazoles in anequimolar amount were taken and refluxed with acetone (20 mL) in the presence of K2CO3for 24 hr. The reaction was monitored by TLC and on completion of the reaction, an excessof solvent was evaporated at room temperature and the reaction mixture was diluted withwater (about 200 mL). The diluted hydrochloric acid was added to precipitate the productwhich was further filtered and thoroughly washed with cold water.

As the rapid development of chemical substances, we look forward to future research findings about 22876-19-3

Reference£º
Article; Maheshwari, Neelesh; Karthikeyan, Chandrabose; Bhadada, Shraddha V.; Verma, Amit K.; Sahi, Chandan; Moorthy, N.S. Hari Narayana; Trivedi, Piyush; Bioorganic Chemistry; vol. 92; (2019);,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

A common heterocyclic compound, the benzoxazole compound, name is 5-Chlorobenzo[d]oxazole-2(3H)-thione,cas is 22876-19-3, mainly used in chemical industry, its synthesis route is as follows.,22876-19-3

Thionyl chloride (885 g, 7.5 mol)And N, N-dimethylformamide (270 ml) were added to a solution of 5-chloro-2-mercaptobenzoxazole (540 g, 2.903 mol) in dichloromethane (5 L) at 5-10 C.Stirred until a clear solution was formed and the reaction solution was stirred at room temperature for 4 hours.After completion of the reaction, the reaction solution was poured into 4 L of ice water, neutralized to neutral with sodium bicarbonate in 1 hour, and extracted with dichloromethane (2.5 L * 2).The organic layer was washed with brine, dried over sodium sulfate and dried to give the crude product. The crude product was washed with n-hexane (2 L * 2) at -20 C, filtered and dried to give yellow liquid 2,5-dichlorobenzo (496.8 g, 91.0%).

As the rapid development of chemical substances, we look forward to future research findings about 22876-19-3

Reference£º
Patent; Shanghai ZaiQi Bio-Tech Co., Ltd.; Wang, Zhiguo; Song, Yanhong; Ma, Xiujuan; Tian, Beibei; Li, Shijiang; Li, Chao; Li, Qiang; Li, Tao; (8 pag.)CN106478537; (2017); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,as a common compound, the synthetic route is as follows.

INVENTIVE EXAMPLE 24 2-(4-Methyl-1-piperazinyl)-5-trifluoromethylbenzoxazole 2-Mercapto-5-trifluoromethylbenzoxazole (200 mg) which has been obtained in the same manner as described in Reference Example 1 was dissolved in chloroform (10 ml), and the solution was mixed with N-methylpiperazine (0.5 ml) and heated overnight under reflux. The solvent was evaporated under a reduced pressure, the resulting residue was mixed with water and then the thus precipitated solid matter was collected by filtration to obtain the title compound 2-(4-methyl-1-piperazinyl)-5-trifluoromethylbenzoxazole (134 mg). 1 H-NMR (CDCl3): delta 2.36 (3 H, s), 2.54 (4 H, t), 3.75 (4 H, t), 7.30 (2 H, d), 7.57 (1 H, s); LCMS: m/z 286 (M+ +1), 22876-19-3

The synthetic route of 22876-19-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Meiji Seika Kaisha, Ltd; Koichi Shudo; US6037342; (2000); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,as a common compound, the synthetic route is as follows.

INVENTIVE EXAMPLE 41 5-Chloro-2-(4-methyl-1-homopiperazinyl)benzoxazole 5-Chloro-2-mercaptobenzoxazole (1 g) was dissolved in toluene (50 ml), N-methylhomopiperazine (3.3 ml) was added dropwise to the solution and then the mixture was stirred with heating for 2 hours. After evaporation of the solvent, the thus obtained mixture was purified by a silica gel column chromatography (methylene chloride_methanol=20:1) to obtain the title compound 5-chloro-2-(4-methyl-1-homopiperazinyl)-benzoxazole (882 mg).

22876-19-3, The synthetic route of 22876-19-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Meiji Seika Kaisha, Ltd; Koichi Shudo; US6037342; (2000); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

The benzoxazole compound, cas is 22876-19-3 name is 5-Chlorobenzo[d]oxazole-2(3H)-thione, mainly used in chemical industry, its synthesis route is as follows.,22876-19-3

INVENTIVE EXAMPLE 24 2-(4-Methyl-1-piperazinyl)-5-trifluoromethylbenzoxazole 2-Mercapto-5-trifluoromethylbenzoxazole (200 mg) which has been obtained in the same manner as described in Reference Example 1 was dissolved in chloroform (10 ml), and the solution was mixed with N-methylpiperazine (0.5 ml) and heated overnight under reflux. The solvent was evaporated under a reduced pressure, the resulting residue was mixed with water and then the thus precipitated solid matter was collected by filtration to obtain the title compound 2-(4-methyl-1-piperazinyl)-5-trifluoromethylbenzoxazole (134 mg). 1 H-NMR (CDCl3): delta 2.36 (3 H, s), 2.54 (4 H, t), 3.75 (4 H, t), 7.30 (2 H, d), 7.57 (1 H, s); LCMS: m/z 286 (M+ +1)

As the rapid development of chemical substances, we look forward to future research findings about 22876-19-3

Reference£º
Patent; Meiji Seika Kaisha, Ltd; Koichi Shudo; US6037342; (2000); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,as a common compound, the synthetic route is as follows.

(1) Synthesis of 4beta-S-(6-chlorobenzoxazole-2)-podophyllotoxin: 414 mg (1 mmol) of podophyllotoxin,201 mg (1 mmol) of 6-chlorobenzoxazole-2-thiol, dried under vacuum for 1 h, using 15 mL of trifluoroacetic acid as solvent in ice bath.The mixture was stirred under vacuum for 1 to 3 hours, and chloroform acetone was used as a developing solvent to detect the end point of the reaction. Adding the reaction system to 20 to 50 times the volumeIn deionized water, the filter cake was collected by filtration and washed to obtain a crude product.

22876-19-3, The synthetic route of 22876-19-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Tang Yajie; Zhao Wei; (23 pag.)CN108285456; (2018); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem