Category: 701-16-6

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.701-16-6,5-Fluoro-2-methylbenzo[d]oxazole,as a common compound, the synthetic route is as follows.

701-16-6, 5-Fluoro-2-Methyl-6-Nitrobenzoxazole (10) Concentrated sulfuric acid (60 mL) was stirred mechanically and cooled in an ice/water bath. To this was gradually added 5-fluoro-2-methylbenzoxazole (9), (20 g, 0.132 Moles), at such a rate that the temperature stayed at 15-20 C., over a 15-20 minute period. A solution of concentrated sulfuric acid (11 mL), and concentrated nitric acid (10 mL), was prepared and added drop by drop to the benzoxazole solution at such a rate that the temperature was maintained at approximately 10 C.

701-16-6 5-Fluoro-2-methylbenzo[d]oxazole 2769350, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Eastman Kodak Company; US2005/101784; (2005); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

701-16-6, 5-Fluoro-2-methylbenzo[d]oxazole is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

701-16-6, [0589] Compound 82: To a stirred solution of Comp-82b (0.1 g, 0.66 mmol) in mixture of THF (5 mL) and ffiuOH (1 mL) was added r-BuOK (0.2 g, 1.98 mmol) and the reaction mixture was stirred for 10 min. Comp-50c(0.1 g, 0.66 mmol) was added portion wise and the reaction mixture was stirred at room temperature for 16 h. Progress of the reaction was monitored by TLC and LCMS. After completion, the reaction mixture was quenched with H20 (5 mL) and extracted with EtOAc (10 mL X 2). The organic layer was washed with brine, dried over anhydrous Na2SO4 and concentrated under reduced pressure to get crude. The crude obtained was purified by prep HPLC to afford (E)-2-(2-(l-cyclopentyl-2,5- dimethyl-lH-pyrrol-3-yl)vinyl)-5-fluorobenzo[d]oxazole (82; 0.08 g, 40%) as white solid. (1026) [0590] HPLC Purity: 99.8% (1027) [0591] MS (ESI) m/e [M+H]+ Rt %: 325.2/2.47/99.4% (1028) [0592] 1H NMR (400 MHz, DMSO- d6) delta 1.62- 1.64 (m, 2 H), 1.82- 1.84 (m, 4 H), 1.98 – 2.08 (m, 2 H), 2.24 (s, 3 H), 2.36 (s, 3 H), 4.54 – 4.67 (m, 1 H), 6.26 (s, 1 H), 6.50 (d, J=15.65 Hz, 1 H), 7.10 – 7.19 (m, 1 H), 7.46 (dd, J=8.80, 2.45 Hz, 1 H), 7.62 – 7.64 (m, 1 H), 7.67 (d, J=15.65 Hz, 1 H).

As the paragraph descriping shows that 701-16-6 is playing an increasingly important role.

Reference£º
Patent; ALPINE ANDROSCIENCES, INC.; PATIL, Santhosh N.; SARMA, Bugga VNBS; (148 pag.)WO2019/152731; (2019); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.701-16-6,5-Fluoro-2-methylbenzo[d]oxazole,as a common compound, the synthetic route is as follows.,701-16-6

General procedure: The SBOs were prepared by the base-catalysed condensation of the appropriate 5-halogeno-2-methylbenzoxazole with the requisite aromatic aldehyde under phase transfer conditions. In a typical experiment, equimolar quantities (5 mmol) of the starting materials were dissolved in dichloromethane (20-50 ml) in the presence of benzyltriethylammonium chloride (3 mmol) and stirred magnetically under a nitrogen atmosphere as an aqueous solution of sodium hydroxide (50%, w/v, 5 ml) was added dropwise over a period of 10 min. After being stirred for 2-36 h until analytical thin layer chromatography indicated that the reaction was complete, the mixture was diluted with water (50 ml) and the SBO was extracted with dichloromethane (3¡Á20 ml), dried (MgSO4), filtered, evaporated under reduced pressure and recrystallized from aqueous methanol or ethanol.

As the paragraph descriping shows that 701-16-6 is playing an increasingly important role.

Reference£º
Article; Ayrton, Stephen T.; Panova, Jekaterina; Michalik, Adam R.; Martin, William H.C.; Gallagher, Richard T.; Bowen, Richard D.; International Journal of Mass Spectrometry; vol. 345-347; (2013); p. 120 – 131;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

701-16-6,701-16-6, 5-Fluoro-2-methylbenzo[d]oxazole is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: The SBOs were prepared by the base-catalysed condensation of the appropriate 5-halogeno-2-methylbenzoxazole with the requisite aromatic aldehyde under phase transfer conditions. In a typical experiment, equimolar quantities (5 mmol) of the starting materials were dissolved in dichloromethane (20-50 ml) in the presence of benzyltriethylammonium chloride (3 mmol) and stirred magnetically under a nitrogen atmosphere as an aqueous solution of sodium hydroxide (50%, w/v, 5 ml) was added dropwise over a period of 10 min. After being stirred for 2-36 h until analytical thin layer chromatography indicated that the reaction was complete, the mixture was diluted with water (50 ml) and the SBO was extracted with dichloromethane (3¡Á20 ml), dried (MgSO4), filtered, evaporated under reduced pressure and recrystallized from aqueous methanol or ethanol.

701-16-6 5-Fluoro-2-methylbenzo[d]oxazole 2769350, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Article; Ayrton, Stephen T.; Panova, Jekaterina; Michalik, Adam R.; Martin, William H.C.; Gallagher, Richard T.; Bowen, Richard D.; International Journal of Mass Spectrometry; vol. 345-347; (2013); p. 120 – 131;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

701-16-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.701-16-6,5-Fluoro-2-methylbenzo[d]oxazole,as a common compound, the synthetic route is as follows.

General procedure: The SBOs were prepared by the base-catalysed condensation of the appropriate 5-halogeno-2-methylbenzoxazole with the requisite aromatic aldehyde under phase transfer conditions. In a typical experiment, equimolar quantities (5 mmol) of the starting materials were dissolved in dichloromethane (20-50 ml) in the presence of benzyltriethylammonium chloride (3 mmol) and stirred magnetically under a nitrogen atmosphere as an aqueous solution of sodium hydroxide (50%, w/v, 5 ml) was added dropwise over a period of 10 min. After being stirred for 2-36 h until analytical thin layer chromatography indicated that the reaction was complete, the mixture was diluted with water (50 ml) and the SBO was extracted with dichloromethane (3¡Á20 ml), dried (MgSO4), filtered, evaporated under reduced pressure and recrystallized from aqueous methanol or ethanol.

701-16-6 5-Fluoro-2-methylbenzo[d]oxazole 2769350, abenzoxazole compound, is more and more widely used in various.

Reference£º
Article; Ayrton, Stephen T.; Panova, Jekaterina; Michalik, Adam R.; Martin, William H.C.; Gallagher, Richard T.; Bowen, Richard D.; International Journal of Mass Spectrometry; vol. 345-347; (2013); p. 120 – 131;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem