Category: 81282-60-2

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81282-60-2,7-Aminobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

81282-60-2, Amine 2b (795 mg, 3.3 mmol) (Scheme 7) was dissolved in 20 ml of AcOEt and at 0C triphosgene (979 mg, 3.3 mmol) was added to the solution. The mixture was warmed at 80C for 4 hours then evaporated and the residue was dissolved in 5ml of DMF. The solution of the isocyanate was added dropwise to a solution in DMF (10 ml) of compound lc (330 mg, 2.2 mmol) and the mixture was warmed at 80C for 8 hours. (TLC AcOEt 1 / petroleum ether 1). The solvent was evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column gave 240 mg of a white solid. Yield = 26% ‘HNMR (DMSO, 200 MHz) delta 1.91 (4H, m), 3.22 (4H, m), 4.38 (2H, d, J = 5.4 Hz), 6.66 (1H, dd, J = 7.6 Hz, J’ = 1.2 Hz), 7.00 (3H, m), 7.19 (1H, d, J = 8 Hz), 7.39 (1H, d), 7.72 (1H, dd, J = 8.6 Hz, J’ = 1), 8.72 (1H, bs), 1 1.63 (1H, bs); [M+1] 421.3 (C2oH19F3N4O3 requires 420.4).

The synthetic route of 81282-60-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO402,mainly used in chemical industry, its synthesis route is as follows.,81282-60-2

To a solution of 2-aminomethyl-5-trifluoromethylfurane (lg, 6.1 mmol) in THF (30 mL) was added CDI (2.1 mol eq) and the mixture was heated at 70C overnight. The reaction mixture was evaporated, water was added and the aqueous phase was extracted with EtOAc (3×20 mL). The recombined organic phases were anhydrified over Na2SO4 and evaporated at reduced pressure(1.6g, 5.9 mmol). The oil obtained (0.3 lg, 1.19 mmol) was dissolved in DMF (20 mL) and the bicyclic amine lc (Scheme 3) was added (0.8 mol eq, 0.15g), then the mixture obtained was heated at 100C overnight. The solvent was removed at reduced pressure and the residue was purified by chromatography (100% EtOAc) to obtain the product as white solid (0.05g, 13% Yield). ‘HNMR (DMSO, 200 MHz) delta 4.37 (d, 2H, J=6), 6.48 (d, 1H, J=2), 6.70 (dd, 1H), 7.01 (m, 2H), 7.16 (m, 1H), 7.70 (dd, 1H, J=2), 8.69 (s, 1H), 1 1.62 (bs, 1H). [M+1] 341.61 (C14H10F3N3O4 requires 341.24).

With the synthetic route has been constantly updated, we look forward to future research findings about 7-Aminobenzo[d]oxazol-2(3H)-one,belong benzoxazole compound

Reference£º
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belong benzoxazole compound,7-Aminobenzo[d]oxazol-2(3H)-one,81282-60-2,Molecular formula: C7H6N2O2,mainly used in chemical industry, its synthesis route is as follows.,81282-60-2

Example 1g. Preparation of bifeprunox MESYLATE (crude) A solution of 128.9 g of 3-[[BIS (2-HYDROXYETHYL) amino] METHYL]-1, 1′-biphenyl in approximately 750 ml of methylethylketone prepared according to Example 1f was stirred under mild nitrogen purge. In a separate vessel 202 g of METHANESULFONIC anhydride was dissolved in in 600 ml of methylethylketone at 10-20C. To the solution OF 3-[[BIS (2-HYDROXYETHYL) amino] METHYL]-1, 1′-biphenyl in methylethylketone 212.8 g of triethylamine was added and 60 ml of methylethylketone. The solution of methanesulfonic anhydride was added in about 45-60 minutes to the 3- [ [BIS (2- hydroxyethyl) AMINO] METHYL]-1, 1 -BIPHENYL/TRIETHYLAMINE solution, while maintaining the temperature below 10C. 60 ml of methylethylketone was added and the mixture was stirred for another 15 minutes, followed by drop wise addition of 109.7 g of METHANESULFONIC acid and addition of 60 mi of methylethylketone in order to rinse the addition vessel. 71.3 g of 7-amino-2 (3H)-BENZOXAZOLONE, prepared according to Example 1E was suspended in 100 mi of methylethylketone and added to the reaction mixture followed by 60 ml of methylethylketone. The reaction mixture was heated to reflux and refluxed during 20-24 hours. After 20-24 hours of reflux 48 ml of water was added and the mixture was refluxed again for 1 hour. 420 ml of methylethylketone was added and 490 ml of methylethylketone/water was distilled of. This last step was rep eated three times. 46. 1 G of METHANESULPHONIC acid was added, the mixture was refluxed for an additional hour and cooled down to room temperature in 1 hour. The mixture was further cooled down to 0-5C and stirred at this temperature for another hour. The solid was filtered off and, washed twice with 75 ml of cold METHYLETHYLKETONE, and dried at 50C and 100 mbar under a gentle nitrogen stream till dry. Yield about 76%.

With the synthetic route has been constantly updated, we look forward to future research findings about 7-Aminobenzo[d]oxazol-2(3H)-one,belong benzoxazole compound

Reference£º
Patent; SOLVAY PHARMACEUTICALS B.V.; WO2005/16898; (2005); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

7-Aminobenzo[d]oxazol-2(3H)-one, cas is 81282-60-2, it is a common heterocyclic compound, the benzoxazole compound, its synthesis route is as follows.,81282-60-2

Example 57: 2-(4-(trifluoromethyl)phenyl)-N-(2,3-dihydro-2-oxobenzo[d]oxazol-7-yl)acetamide (scheme 10) Preparation of 2-(4-(trifluoromethyl)phenyl)-N-(2,3-dihydro-2-oxobenzo[d]oxazol-7-yl)acetamide 4-trifluoromethylphenylacetic acid (453 mg, 2.2 mmol) was dissolved in 20 ml of THF and at 0C DEPC (0.43 ml, 1.3equiv) and amine 1c (400 mg, 2.66 mmol) were added to the solution. The mixture was warmed at 80C overnight, then evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column using AcOEt 3 /petroleum ether 7 as eluant gave 340 mg of a white solid. Yield = 46% 1HNMR (DMSO, 200 MHz) delta 3.86 (2H, s), 6.86 (1H, d), 7.06 (1H, t), 7.58 (3H, m), 7.70 (2H, d, J = 8.4 Hz), 10.32 (1H, bs), 8.73 (1H, bs), 11.80 (1H, bs); [M+1] 337.2 (C16H11F3N2O3 requires 336.3).

As the rapid development of chemical substances, we look forward to future research findings about 81282-60-2

Reference£º
Patent; Pharmeste S.r.l.; EP2377850; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

81282-60-2,81282-60-2, 7-Aminobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of 128.9 g of 3-[[bis(2-hydroxyethyl)amino]methyl]-1,1′-biphenyl in approximately 750 ml of methylethylketone prepared according to Example 1f was stirred under mild nitrogen purge. In a separate vessel 202 g of methanesulfonic anhydride was dissolved in 600 ml of methylethylketone at 10-20 C. To the solution of 3-[[bis(2-hydroxyethyl)amino]methyl]-1,1′-biphenyl in methylethylketone 212.8 g of triethylamine was added and 60 ml of methylethylketone. The solution of methanesulfonic anhydride was added in about 45-60 minutes to the 3-[[bis(2-hydroxyethyl)amino]methyl]-1,1′-biphenyl/triethylamine solution, while maintaining the temperature below 10 C. 60 ml of methylethylketone was added and the mixture was stirred for another 15 minutes, followed by drop wise addition of 109.7 g of methanesulfonic acid and addition of 60 ml of methylethylketone in order to rinse the addition vessel. 71.3 g of 7-amino-2(3H)-benzoxazolone, prepared according to Example 1e was suspended in 100 ml of methylethylketone and added to the reaction mixture followed by 60 ml of methylethylketone. The reaction mixture was heated to reflux and refluxed for 20-24 hours. After 20-24 hours of reflux 48 ml of water was added and the mixture was refluxed again for 1 hour. 420 ml of methylethylketone was added and 490 ml of methylethylketone/water was distilled of. This last step was repeated three times. 46.1 g of methanesulphonic acid was added, the mixture was refluxed for an additional hour and cooled down to room temperature in 1 hour. The mixture was further cooled down to 0-5 C. and stirred at this temperature for another hour. The solid was filtered off and, washed twice with 75 ml of cold methylethylketone, and dried at 50 C. and 100 mbar under a gentle nitrogen stream till dry. Yield about 76%.

81282-60-2 7-Aminobenzo[d]oxazol-2(3H)-one 11147814, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Eijgendaal, Irene; Klein, Gerrit; Terhorst-Van Amstel, Maria J.L.; Zwier, Klaas; Bruins, Nico; Rigter, Hendrikus T.; Gout, Eric; Boon, Caroline; De Vries, Michiel H.; US2006/194812; (2006); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

81282-60-2, 7-Aminobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,81282-60-2

To a mixture of 14.9 g N-methyldiethanolamine (3), 44.5 g triethylamine and 120 ml methyl ethyl ketone (MEK) a mixture of 51.6 g methanesulfonic anhydride and 100 ml MEK was dosed at 0 C. Subsequently 14.5 g methanesulfonic acid was dosed at 0 C. After which, 14.5 g 7-amino-2(3H)-benzoxazolone (2) was added and the mixture was heated to reflux followed by a reflux period of 48 hours during which the product crystallized. The product was filtered off after cooling to 0 C. and washed with MEK. The product was dried at 50 C. and 100 mbar to constant weight. The overall yield of this step was about 67% (crude on crude).

81282-60-2 7-Aminobenzo[d]oxazol-2(3H)-one 11147814, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Rheenen, Jeroen Van; Muijselaar, Wilhelmus G.H.M.; Teunissen, Hendrik; US2011/86862; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

7-Aminobenzo[d]oxazol-2(3H)-one, cas is 81282-60-2, it is a common heterocyclic compound, the benzoxazole compound, its synthesis route is as follows.,81282-60-2

Preparation of 1-(4-(trifluoromethyl)benzyl)-3-(2,3-dihydro-2-oxobenzo[d]oxazol-7-yl)urea Commercially available 4-trifluoromethylbenzylamine (1 ml, 7 mmol) was dissolved in 20 ml of AcOEt and at 0C triphosgene (2 g, 7 mmol) was added to the solution. The mixture was warmed at 80C for 4 hours then evaporated and the residue was dissolved in 5 ml of DMF. The solution of the isocyanate was added dropwise to a solution in DMF (10 ml) of compound 1c (700 mg, 4.66 mmol) and the mixture was warmed at 80C for 8 hours. (TLC AcOEt 4 / petroleum ether 6). The solvent was evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column gave 320 mg of a white solid. Yield = 19.5% 1HNMR (DMSO, 400 MHz) delta 4.41 (2H, d, J = 6 Hz), 6.67 (1H, dd, J = 7.6 Hz, J’ = 1.2 Hz), 7.00 (1H, t, J = 8 Hz), 7.09 (1H, t), 7.51 (2H, d, J = 8 Hz), 7.70 (3H, m), 8.73 (1H, s), 10.60 (1H, bs); [M+1] 352.1 (C16H12F3N3O3 requires 351.3).

As the rapid development of chemical substances, we look forward to future research findings about 81282-60-2

Reference£º
Patent; Pharmeste S.r.l.; EP2377850; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

A common heterocyclic compound, the benzoxazole compound, name is 7-Aminobenzo[d]oxazol-2(3H)-one,cas is 81282-60-2, mainly used in chemical industry, its synthesis route is as follows.,81282-60-2

4-trifluoromethylphenylacetic acid (453 mg, 2.2 mmol) was dissolved in 20 ml of THF and at 0C DEPC (0.43 ml, 1.3equiv) and amine lc (400 mg, 2.66 mmol) were added to the solution. The mixture was warmed at 80C overnight, then evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column using AcOEt 3 /petroleum ether 7 as eluant gave 340 mg of a white solid. Yield = 46% 1HNMR (DMSO, 200 MHz) delta 3.86 (2H, s), 6.86 (1H, d), 7.06 (1H, t), 7.58 (3H, m), 7.70 (2H, d, J = 8.4 Hz), 10.32 (1H, bs), 8.73 (1H, bs), 1 1.80 (1H, bs); [M+1] 337.2 (C 16H11F3N2O3 requires 336.3).

As the rapid development of chemical substances, we look forward to future research findings about 81282-60-2

Reference£º
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

A common heterocyclic compound, the benzoxazole compound, name is 7-Aminobenzo[d]oxazol-2(3H)-one,cas is 81282-60-2, mainly used in chemical industry, its synthesis route is as follows.,81282-60-2

To a solution of [6-(trifluoromethyl)-3-pyridyl)]-methanamine (lg, 4.7 mmol) in THF (30 mL) was added CDI (2.1 mol eq) and the mixture was heated at 70C overnight. The reaction mixture was evaporated, water was added and the aqueous phase was extracted with EtOAc (3×20 mL). The recombined organic phases were anhydrified over Na2SO4 and evaporated at reduced pressure (quantitative yield). The oil obtained (0.34g, 1.2 mmol) was dissolved in DMF (15 mL) and the bicyclic amine lc (Scheme 3) was added (0.8 mol eq), then the mixture obtained was heated at 100C overnight. The solvent was removed at reduced pressure and the residue was purified by chromatography (1 : 1 EtOAc:petroleum ether) to obtain the product as a white solid (0.064g, 20% Yield). ‘HNMR (DMSO, 200 MHz) delta 4.46 (d, 2H, J=6), 6.66 (d, 1H, J=8), 6.96 (t, 1H), 7.04 (bt, 1H), 7.64 (d, 1H, J=8), 7.86 (m, 2H), 8.70 (s, 1H), 8.77 (s, 1H), 1 1.60 (bs, 1H). [M+1] 358.02 (Ci5HnF3N4O3 requires 357.27).

As the rapid development of chemical substances, we look forward to future research findings about 81282-60-2

Reference£º
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

81282-60-2, 7-Aminobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

81282-60-2, Step 4 3-Ethoxy-4-(2-oxo-2,3-dihydrobenzooxazol-7-ylamino)cyclobut-3-ene-1,2-dione A mixture of 0.247 g of 7-amino-3H-benzooxazol-2-one (1.6 mmol, 1 eq) and 0.36 ml of 3,4-diethoxycyclobut-3-ene-1,2-dione (2.5 mmol, 1.5 eq) in 9 ml of ethanol was stirred at ambient temperature for 2 days (formation of a precipitate). Ethanol was added in order to promote the fall of the precipitate, which was filtered off, washed with diethyl ether and dried under vacuum at 45 C. 0.35 g of product was obtained in the form of a light khaki solid. Yield=78%.

81282-60-2 7-Aminobenzo[d]oxazol-2(3H)-one 11147814, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Musicki, Branislav; Aubert, Jerome; Boiteaux, Jean-Guy; Clary, Laurence; Rossio, Patricia; Schuppli-Nollet, Marlene; US2014/309208; (2014); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem