Category: 81282-60-2

81282-60-2, 7-Aminobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of [6-(trifluoromethyl)-3-pyridyl)]-methanamine (lg, 4.7 mmol) in THF (30 mL) was added CDI (2.1 mol eq) and the mixture was heated at 70C overnight. The reaction mixture was evaporated, water was added and the aqueous phase was extracted with EtOAc (3×20 mL). The recombined organic phases were anhydrified over Na2SO4 and evaporated at reduced pressure (quantitative yield). The oil obtained (0.34g, 1.2 mmol) was dissolved in DMF (15 mL) and the bicyclic amine lc (Scheme 3) was added (0.8 mol eq), then the mixture obtained was heated at 100C overnight. The solvent was removed at reduced pressure and the residue was purified by chromatography (1 : 1 EtOAc:petroleum ether) to obtain the product as a white solid (0.064g, 20% Yield). ‘HNMR (DMSO, 200 MHz) delta 4.46 (d, 2H, J=6), 6.66 (d, 1H, J=8), 6.96 (t, 1H), 7.04 (bt, 1H), 7.64 (d, 1H, J=8), 7.86 (m, 2H), 8.70 (s, 1H), 8.77 (s, 1H), 1 1.60 (bs, 1H). [M+1] 358.02 (Ci5HnF3N4O3 requires 357.27).

As the paragraph descriping shows that 81282-60-2 is playing an increasingly important role.

Reference£º
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81282-60-2,7-Aminobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

Amine 2c (1 g, 3.8 mmol) (Scheme 7) was dissolved in 20 ml of AcOEt and at 0C triphosgene (1.13 g, 3.8 mmol) was added to the solution. The mixture was warmed at 80C for 4 hours then evaporated and the residue was dissolved in 5 ml of DMF. The solution of the isocyanate was added dropwise to a solution in DMF (10 ml) of compound lc (390 mg, 2.6 mmol) and the mixture was warmed at 80C for 8 hours. (TLC AcOEt 1 / petroleum ether 1). The solvent was evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column gave 160 mg of a white solid. Yield = 14% 1HNMR (DMSO, 200 MHz) delta 1.56 (2H, bs), 1.69 (4H, bs), 2.85 (4H, m), 4.42 (2H, d, J = 5.6 Hz), 6.66 (1H, dd, J = 8 Hz, J’ = 0.8 Hz), 7.01 (2H, m), 7.32 (1H, s), 7.44 (2H, dd, J = 7.6 Hz), 7.72 (1H, dd, J = 8.6 Hz, J’ = 1 Hz), 8.73 (1H, bs), 1 1.68 (1H, bs); [M+1] 435.2 (C2iH21F3N4O3 requires 434.4).

As the paragraph descriping shows that 81282-60-2 is playing an increasingly important role.

Reference£º
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81282-60-2,7-Aminobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

4.91 g (32.7 mmol) of the anilin was suspended in 75 ml of 48% of HBr/water, while it was cooled to -5 C. Subsequently 2.27 g (33 mmol) of sodium nitrite dissolved in 4 ml of water, were added dropwise during 15 minutes. Stirring was continued at 0 C. for 15 minutes. Subsequently, the reaction mixture was added, in one time, to a 0 C. solution of 2.42 g (16.9 mmol) CuBr in 20 ml of 48% HBr/water. After 30 minutes the reaction mixture was heated to 85 C. for one hour, after which it was allowed to reach room temperature, stirring was continued for 14 hours. To the mixture diethyl ether and water were added, after shaking the organic layer was isolated which was washed with water. The organic layer, together with some silica, was concentrated in vacuo, and the residue was put on top of a flash chromatography column (SiO2) using Et2O/petroleum ether (1/1), and later on pure Et2O as the eluent. The combined product containing fractions yielded after concentration in vacuo 3.3 g (47%) of the desired corresponding bromo product.

81282-60-2 7-Aminobenzo[d]oxazol-2(3H)-one 11147814, abenzoxazole compound, is more and more widely used in various.

Reference£º
Patent; SOLVAY PHARMACEUTICALS B.V.; US2006/122189; (2006); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81282-60-2,7-Aminobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

4-trifluoromethylphenylacetic acid (453 mg, 2.2 mmol) was dissolved in 20 ml of THF and at 0C DEPC (0.43 ml, 1.3equiv) and amine lc (400 mg, 2.66 mmol) were added to the solution. The mixture was warmed at 80C overnight, then evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column using AcOEt 3 /petroleum ether 7 as eluant gave 340 mg of a white solid. Yield = 46% 1HNMR (DMSO, 200 MHz) delta 3.86 (2H, s), 6.86 (1H, d), 7.06 (1H, t), 7.58 (3H, m), 7.70 (2H, d, J = 8.4 Hz), 10.32 (1H, bs), 8.73 (1H, bs), 1 1.80 (1H, bs); [M+1] 337.2 (C 16H11F3N2O3 requires 336.3).

The synthetic route of 81282-60-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PHARMESTE S.R.L.; NAPOLETANO, Mauro; TREVISANI, Marcello; PAVANI, Maria Giovanna; FRUTTAROLO, Francesca; WO2011/120604; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81282-60-2,7-Aminobenzo[d]oxazol-2(3H)-one,as a common compound, the synthetic route is as follows.

A solution of Ms20 (32 1 g, 184.8 mmol) in MeCN (200 mL) was cooled to < -5 C (ice/H20 salt) and sequentially were added a solution of N-benzyl-bis(2- hydroxyethyl)amine (16.4 g, 84.1 mmol) in MeCN (50 mL), Et3N (36 mL, 255 mmol, 3.8 eq.), and MsOH (13.1 mL, 202 mmol, 3 eq.) while maintaining the temperature below 10C. 7-Aminobenzo[d]oxazol-2(3H)-one (10.0 g, 67.2 mmol) was added as a solid and the mixture was heated to reflux. Et3N (28.5 mL, 202 mmol) was added drop- wise over a period of 1.5 hour. Reflux was maintained for 18 additional hours. The resulting clear solution was allowed to cool to RT and concentrated in vacuo at 70C. The residue was separated between NaHCC (0.8 L) and EtOAc (0.4 L). The aqueous layer was extracted with EtOAc (3 x 0.2 L). The combined organic layers were washed with brine, dried (NaiSC^) and concentrated to afford 7-(4-benzylpiperazin-l- yl)benzo[d]oxazol-2(3H)-one as a white solid (20.2 g, 65.3 mmol, 97%). 81282-60-2 7-Aminobenzo[d]oxazol-2(3H)-one 11147814, abenzoxazole compound, is more and more widely used in various. Reference£º
Patent; AAPA B.V.; HEERES, Andre; WILLIGERS – HOGG, Sandra; BORST, Marcus Leonardus Gerardus; DROeGE, Melloney Joyce; WO2015/69110; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem