Heterocyclic Building Blocks-Benzoxazole

22876-19-3, 5-Chlorobenzo[d]oxazole-2(3H)-thione is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Subsequently, 5-chloro-2-mercaptobenzoxazole (3.1 g, 16.7 mmol) was dissolved in thionyl chloride (30 mL, 413 mmol). DMF (1.5 mL) was added and the reaction mixture was heated at 65 C. for 45 min. The solvent was removed under reduced pressure and to the residue was added toluene (2*60 mL) followed by evaporation each time to remove the excess SOCl2 (azetrope). The resultant crude product was dissolved in ethyl acetate (100 mL), washed with water (100 mL) and dried over Na2SO4. Evaporation of ethyl acetate gave 2,5-dichlorobenzoxazole, compound 19, as a red oil (3.2 g).

As the paragraph descriping shows that 22876-19-3 is playing an increasingly important role.

Reference£º
Patent; GALLEON PHARMACEUTICALS, INC.; US2011/224269; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

132244-31-6, 5-Bromobenzo[d]oxazole is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 5-bromobenzo[Patent; IRM LLC; CHE, Jianwei; DING, Qiang; HE, Xiaohui; LIU, Hong; LIU, Yahua; MICHELLYS, Pierre-Yves; OKRAM, Barun; WU, Xu; YANG, Kunyong; ZHU, Xuefeng; WO2011/14795; (2011); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,as a common compound, the synthetic route is as follows.

General procedure: A mixture of 1-(chloroacetyl)-3-(2-thienyl)-5-(1,3-benzodioxol-5-yl)-2-pyrazoline (0.005 mol) and aryl thiol (0.005 mol) in acetone (30 mL) was stirred at room temperature for 8 h in the presence of potassium carbonate (0.005 mol). The solvent was evaporated. The residue was washed with water and dried. The product was recrystallized from ethanol [18, 25].

As the paragraph descriping shows that 22876-19-3 is playing an increasingly important role.

Reference£º
Article; Oezdemir, Ahmet; Sever, Belgin; Alt?ntop, Mehlika Dilek; Letters in drug design and discovery; vol. 16; 1; (2018); p. 82 – 92;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4570-41-6,Benzo[d]oxazol-2-amine,as a common compound, the synthetic route is as follows.

(Step 1) Synthesis of (R)-tert-butyl 3-(4-amino-3-((benzo[d]oxazol-2-yl)carbamoyl)-1H-pyrazolo[3,4-d]pyrimidin-1-yl)piperidine-1-carboxylate (0190) 300 mg of (R)-tert-butyl 3-(4-amino-3-iodo-1H-pyrazolo[3,4-d]pyrimidin-1-yl)piperidine-1-carboxylate obtained in Reference Example 1 was dissolved in 3 mL of NMP. 118 mg of benzo[d]oxazol-2-amine, 20 mg of xantphos, and 0.15 mL of N-methylmorpholine were added thereto, and a degassing operation was carried out. Thereafter, 7.6 mg of palladium acetate was added thereto, and under a carbon monoxide atmosphere, the mixture was heated to 110¡ã C. and stirred for 2 hours. After the mixture was cooled, 4.5 mL of methanol and 0.45 mL of a 5 N aqueous solution of sodium hydroxide were added thereto, and the mixture was stirred for 30 minutes at room temperature. Thereafter, the pH was adjusted to 5.3 with 2 N HCl, and a solid thus obtained was collected by filtration. The crude product was purified by a silica gel column (chloroform-methanol), and thus 257 mg of the title compound was obtained as a white solid.

The synthetic route of 4570-41-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TAIHO PHARMACEUTICAL CO., LTD.; OSHIUMI, Hiromi; (27 pag.)US2017/44166; (2017); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

27383-86-4, Methyl benzo[d]oxazole-2-carboxylate is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Benzoxazole-2-carboxylic acid hydrazide (4): To a mixture of 3 (0.01 mol) in 10 mL of absolute ethanol and hydrazine hydrate (0.04 mol) was added. Then the reaction mixture was refluxed for 8 h. After completion of the reaction (monitored by TLC), it was then diluted with ice-cold water (20 mL) and the solid obtained was purified by crystallization from ethanol to afford pure product benzoxazole-2-carboxylic acid hydrazide 4. Benzoxazole-2-carboxylic acid N’-acetyl hydrazide (5a-d): To a solution of 4 (0.01 mol) in dioxane (10 mL) corresponding benzoyl chloride (0.01 mol) was added.

27383-86-4 Methyl benzo[d]oxazole-2-carboxylate 13353743, abenzoxazole compound, is more and more widely used in various.

Reference£º
Article; Vodela, Sunil; Mekala, Raghu Vardhan Reddy; Danda, Ravinder Reddy; Kodhati, Venkateshwarlu; Chinese Chemical Letters; vol. 24; 7; (2013); p. 625 – 628;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1: 6-bromo-3-methyl-1, 3-benzoxazol-2(3H)-one A mixture of 6-bromo-1,3-benzoxazol-2(3H)-one (Aldrich, catNo.697036: 0.32 g, 1.5 mmol), methyl iodide (0.28 mL, 4.5 mmol) and potassium carbonate (210 mg, 1.5 mmol) in acetone (3 mL) was heated to 80 C. and stirred for 3 h. The reaction mixture was cooled to room temperature then diluted with water and extracted with EtOAc. The combined extracts were dried over Na2SO4, filtered and concentrated. The residue was used in the next step without further purification. LC-MS calculated for C8H7BrNO2 (M+H)+: m/z=228.0. found 227.9.

As the paragraph descriping shows that 19932-85-5 is playing an increasingly important role.

Reference£º
Patent; Incyte Corporation; He, Chunhong; Li, Zhenwu; Wu, Liangxing; Yao, Wenqing; Zhang, Fenglei; (84 pag.)US2016/289238; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.701-16-6,5-Fluoro-2-methylbenzo[d]oxazole,as a common compound, the synthetic route is as follows.

General procedure: The SBOs were prepared by the base-catalysed condensation of the appropriate 5-halogeno-2-methylbenzoxazole with the requisite aromatic aldehyde under phase transfer conditions. In a typical experiment, equimolar quantities (5 mmol) of the starting materials were dissolved in dichloromethane (20-50 ml) in the presence of benzyltriethylammonium chloride (3 mmol) and stirred magnetically under a nitrogen atmosphere as an aqueous solution of sodium hydroxide (50%, w/v, 5 ml) was added dropwise over a period of 10 min. After being stirred for 2-36 h until analytical thin layer chromatography indicated that the reaction was complete, the mixture was diluted with water (50 ml) and the SBO was extracted with dichloromethane (3¡Á20 ml), dried (MgSO4), filtered, evaporated under reduced pressure and recrystallized from aqueous methanol or ethanol.

The synthetic route of 701-16-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Ayrton, Stephen T.; Panova, Jekaterina; Michalik, Adam R.; Martin, William H.C.; Gallagher, Richard T.; Bowen, Richard D.; International Journal of Mass Spectrometry; vol. 345-347; (2013); p. 120 – 131;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

701-16-6, 5-Fluoro-2-methylbenzo[d]oxazole is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7. 4-(5-Fluoro-2-methvl-1 ,3-benzoxazol-3-ium-3-yl)butane-1 -sulfonate; 5-Fluoro-2-methylbenzoxazole (from Example 2, 500mg, 3.3mmol) and 1 ,4-butanesultone (2.50ml) were mixed and heated under nitrogen at 1100C for 1 deltahrs. The reaction mix was then allowed to cool to room temperature and triturated with diethyl ether to give an immiscible gum. The liquors were decanted, the gum washed with more ether and dried under vacuum. The crude product salt was then used for dye syntheses without further purification.

The synthetic route of 701-16-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GE HEALTHCARE UK LIMITED; WO2008/40994; (2008); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

22876-19-3, 5-Chlorobenzo[d]oxazole-2(3H)-thione is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Thionyl chloride (885 g, 7.5 mol)And N, N-dimethylformamide (270 ml) were added to a solution of 5-chloro-2-mercaptobenzoxazole (540 g, 2.903 mol) in dichloromethane (5 L) at 5-10 C.Stirred until a clear solution was formed and the reaction solution was stirred at room temperature for 4 hours.After completion of the reaction, the reaction solution was poured into 4 L of ice water, neutralized to neutral with sodium bicarbonate in 1 hour, and extracted with dichloromethane (2.5 L * 2).The organic layer was washed with brine, dried over sodium sulfate and dried to give the crude product. The crude product was washed with n-hexane (2 L * 2) at -20 C, filtered and dried to give yellow liquid 2,5-dichlorobenzo (496.8 g, 91.0%).

22876-19-3 5-Chlorobenzo[d]oxazole-2(3H)-thione 708870, abenzoxazole compound, is more and more widely used in various.

Reference£º
Patent; Shanghai ZaiQi Bio-Tech Co., Ltd.; Wang, Zhiguo; Song, Yanhong; Ma, Xiujuan; Tian, Beibei; Li, Shijiang; Li, Chao; Li, Qiang; Li, Tao; (8 pag.)CN106478537; (2017); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.132244-31-6,5-Bromobenzo[d]oxazole,as a common compound, the synthetic route is as follows.

General procedure: A 25 mL flame-dried Schlenk tube was charged with the1-(pyrimid-2-yl)-1H-indoles 1 (0.25 mmol), 1,3-azoles2 (0.75 mmol), [RhCp*Cl2]2 (3.9 mg, 2.5 mol%), AgSbF6(8.6 mg, 10 mol%), pivalic acid (PivOH,51 mg, 0.50 mmol), Ag2CO3 (6.9 mg, 10 mol%), and DCB(1.0 mL). The tube was sealed under an O2 atmosphere.The reaction mixture was stirred vigorously and heated at140 C for 24 h, and then cooled to ambient temperature.The final reaction mixture was diluted with 10-20 mL ofCH2Cl2, filtered through a Celite pad to remove insolublesalts, and then washed with 10-20 mL of CH2Cl2. Thecombined CH2Cl2 extracts were concentrated in a vacuumevaporator and the crude product was purified by flashcolumn chromatography on silica gel (petroleum ether/ethylacetate=3/1, v/v) to give the desired product 3 or 4.

As the paragraph descriping shows that 132244-31-6 is playing an increasingly important role.

Reference£º
Article; Wang, Yan; Lan, Jingbo; Science China Chemistry; vol. 61; 2; (2018); p. 200 – 205;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem