Tag: M.W:100-200

3889-13-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Nitro-2,3-dihydro-1,3-benzoxazol-2-one, cas is 3889-13-2,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: One of 4a-d (1 equiv.) and K2CO3 (3 equiv.) in DMF was stirred at 90C for 1h, then the solution was allowed to cool to 60C and was added different substituted benzyl chlorides or phenyl ethyl chlorides (3 equiv.). The reaction mixture was stirred at 60C for another 7h and allowed to cool to room temperature. The saturated NH4Cl solution was added to quench the reaction. The mixture was diluted with water and extracted with ethyl acetate to afford the crude product that was purified by flash column chromatography on silica gel to yield the target products.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3889-13-2, 5-Nitro-2,3-dihydro-1,3-benzoxazol-2-one

Reference：
Article; Zou, Yi; Wang, Yan; Wang, Fang; Luo, Minghao; Li, Yuezhen; Liu, Wen; Huang, Zhangjian; Zhang, Yihua; Guo, Wenjie; Xu, Qiang; Lai, Yisheng; European Journal of Medicinal Chemistry; vol. 138; (2017); p. 199 – 211;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

1086378-35-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Methyl benzo[d]oxazole-7-carboxylate, cas is 1086378-35-9,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a degassed solution (N2 was purged for 10 min) of methyl 1,3-benzoxazole-4-carboxylate (150 mg, 0.847mmol) and N-(2-iodophenyl)benzamide 2a (273 mg, 0.847 mmol) in anhydrous toluene (4ml) , CuI (32 mg, 0.169 mmol), xantphos (98 mg, 0.169 mmol), Pd(OAc)2 (10 mg, 0.042 mmol), Cs2CO3 (685 mg, 2.117 mmol) were added at room temperature under nitrogen atmosphere. Reaction mixture was continued for 20 hours at reflux condition. After the completetion of the reaction (monitored by TLC), Reaction mixture was filtered through celite bed and washed with methanol (10 ml),filtrate was concentrated. Crude mass which was purified by column chromatography over silica gel (230-400 mesh) using DCM-Methanol (1:9) as elutant to affordthe products 3a (284 mg) as white solid. All the other compounds 3b-3r were prepared similarly following the above procedure.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Methyl benzo[d]oxazole-7-carboxylate, 1086378-35-9

Reference：
Article; Sasmal, Swarnendu; Sen, Indira; Hall, Roger G.; Pal, Sitaram; Tetrahedron Letters; vol. 56; 11; (2015); p. 1374 – 1377;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]oxazol-2-amine, cas is 4570-41-6,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

Example 6 N-Benzooxazol-2-yl-3-cyclopentyl-2-(3,4-dichloro-phenyl)-propionamide A solution of triphenylphosphine (274 mg, 1.04 mmol) in methylene chloride (6 mL) was cooled to 0° C. and then treated with N-bromosuccinimide (211 mg, 1.18 mmol). The resulting brownish-purple mixture was stirred at 0° C. for 5 min until the reaction mixture became homogeneous. The reaction mixture was then treated with 3-cyclopentyl-2-(3,4-dichloro-phenyl)-propionic acid (prepared as in Example 1, 200 mg, 0.70 mmol). The reaction mixture was stirred at 0° C. for 20 min and then allowed to warm to 25° C. where it was stirred for 30 min. The reaction mixture was then treated with 2-aminobenzoxazole (140 mg, 1.04 mmol) and pyridine (0.17 mL, 2.09 mmol), and the reaction mixture was allowed to stir at 25° C. for 20 h. The resulting reaction mixture was diluted with water (15 mL) and then extracted with methylene chloride (3*15 mL). The combined organic layers were dried over sodium sulfate, filtered, and concentrated in vacuo. Biotage chromatography (FLASH 40S, Silica, 80/20 hexanes/ethyl acetate) afforded N-benzooxazol-2-yl-3-cyclopentyl-2-(3,4-dichloro-phenyl)-propionamide (214 mg, 76percent) as a light yellow foam: EI-HRMS m/e calcd for C21H20Cl2N2O2 (M+) 402.0902, found 402.0908.

The chemical industry reduces the impact on the environment during synthesis,4570-41-6,Benzo[d]oxazol-2-amine,I believe this compound will play a more active role in future production and life.

Reference：
Patent; Corbett, Wendy Lea; Grimsby, Joseph Samuel; Haynes, Nancy-Ellen; Kester, Robert Francis; Mahaney, Paige Erin; Sarabu, Ramakanth; US2002/103199; (2002); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

22876-19-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chlorobenzo[d]oxazole-2(3H)-thione, cas is 22876-19-3,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

To a suspension of 5-chloro-2-mercaptobezoxazole (5.0 g, 26.9 mmol) in POCl3 (12.6 mL, 135 mmol) was added PCl5 (6.2 g, 129.6 mmol) and about 20 mL CH2Cl2. After stirring 5 days, the solvents were removed by rotary evaporation, the residue was partitioned between EtOAc and saturated aqueous NaHCO3. The layers were separated, the organic was washed with brine, dried over Na2SO4, and concentrated. The residue was dissolved in a minimum amount of CHCl3, hexanes were added, and a small amount of solids were filtered off. The filtrate was concentrated to provide D-1 as a white solid. Data for D-1: LC/MS: rt=2.38 min; m/z (M+H)=188.0 found; 188.0 required.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 5-Chlorobenzo[d]oxazole-2(3H)-thione, 22876-19-3

Reference：
Patent; Bergman, Jeffrey M.; Breslin, Michael J.; Coleman, Paul J.; Cox, Christopher D.; Mercer, Swati P.; Roecker, Anthony J.; US2008/132490; (2008); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

64037-15-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Methyl-2-aminobenzoxazol, cas is 64037-15-6,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

In 2500 ml of anhydrous toluene, succinic anhydride (Mol. Wt.: 100.07, 141.1 g, 1.41 mol) and 70 g (about 0.47 mol) of compound from Step 9a were added under stirred condition, and then the mixture was refluxed for overnight. After that, 100 g (0.26 mol) of HATU and 41.36 ml (0.376 mol) of 4-methylpholine were added and then the resulting mixture was refluxed for 2-3 hours. TLC showed that the major spot was product and its TLC RF value is about 0.45 in solution of acetone and hexane by the ratio of 1 to 2. After reaction was completed, the solvent was evaporated and the residues was dissolved in about 2000 ml of CH2Cl2, the solution was treated with aqueous NaHCO3 and CO2 was generated during stirring. After pH was adjusted to be about 7-8 and washed with brine, organic phase was separated and dried over MgSO4. Filtration and removal of solvent gave about 98 g of crude desired product as fine white needle crystalline. MS(ESI): m/e (M+H) 231.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 5-Methyl-2-aminobenzoxazol, 64037-15-6

Reference：
Patent; Xu, Guoyou; Gai, Yonghua; Wang, Guoqlang; Or, Yat Sun; Wang, Zhe; US2007/207972; (2007); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

Name is Benzo[d]oxazol-2-amine, as a common heterocyclic compound, it belongs to benzoxazole compound, and cas is 4570-41-6, its synthesis route is as follows.

Example 1 ethyl 6-hydroxy-4-oxo-1,2-dihydro-4H-pyrrolo [3,2,1-ij] quinoline-5-carboxylate (130 mg, 0.50 mmol) and benzo[d]oxazol-2-amine (80 mg, 0.60 mmol) is dissolved in DMF (2 mL) and placed in a sealed tube, heated at 160C for 30 minutes, Cooled slowly to room temperature. The resulting solid was filtered and washed with ethanol to give the target compound (KCNS-SM-31); 73 mg, 42% yield).

4570-41-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,4570-41-6 ,Benzo[d]oxazol-2-amine, other downstream synthetic routes, hurry up and to see

Reference：
Patent; Korea Research Institute of Chemical Technology; Park Cheol-min; Lee Seon-gyeong; Song Jong-hwan; (39 pag.)KR2019/67546; (2019); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to benzoxazole compound, name is Benzo[d]oxazole-2-thiol, and cas is 2382-96-9, its synthesis route is as follows.

General procedure: A mixture of 2-mercaptobenzoxazole (2a, X = O), 2-mercaptobenzthiazole (2b,X = S) (10 mmol), 2-chloroacetic acid (10 mmol), K2CO3 (10 mmol), DMF (10 mL),and TBAB as a PTC was stirred for 1-2 h at r.t. After completion of reaction, the mixturewas cooled to r.t. and treated with acetic acid until neutralized. The separated solid wasfiltered, washed with water (2 × 40 mL), and dried to obtain crude 3a,b. The latter onrecrystallization from suitable solvent gave pure 3a,b.

2382-96-9, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,2382-96-9 ,Benzo[d]oxazole-2-thiol, other downstream synthetic routes, hurry up and to see

Reference：
Article; Rafeeq, Mohammad; Ramana Reddy, Chittireddy Venkata; Dubey, Pramod Kumar; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 190; 11; (2015); p. 1857 – 1864;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

Name is 6-Bromobenzo[d]oxazole, as a common heterocyclic compound, it belongs to benzoxazole compound, and cas is 375369-14-5, its synthesis route is as follows.

6-Bromobenzo[d]oxazole (0.600 g, 3.03 mmol), anhydrous potassium acetate (0.595 g, 6.06 mmol) and 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi(1,3,2-dioxaborolane) (0.846 g, 3.33 mmol) were combined in dry dioxane (10 mL), and the mixture was sparged with nitrogen for 15 min. The reaction mixture was treated with Pd(dppf)Cl2 (0.124 mg, 0.152 mmol) and was heated to 90C for 16 h After cooling, the mixture was shaken with EtOAc (45 mL) and satd NaCl (10 mL) and was filtered to remove dark solids. The organic phase was dried and concentrated. Purification by silica gel chromatography with 0-30% EtOAc-hexane afforded the title compound as white crystals (600 mg, 74%): mp 79-81 C; NMR (400 MHz, CDCl3) delta 8.13 (s, 1H), 8.04 (s, 1H), 7.80 (qt, / = 3.3, 1.8 Hz, 2H), 1.37 (s, 12H); EIMS m/z 245.

375369-14-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,375369-14-5 ,6-Bromobenzo[d]oxazole, other downstream synthetic routes, hurry up and to see

Reference：
Patent; DOW AGROSCIENCES LLC; BELL, Jared; BUYSSE, Ann M.; DAEUBLE, John F.; ECKELBARGER, Joseph D.; EPP, Jeffrey B.; IRVINE, Nicholas M.; KISTER, Jeremy; LO, William C.; LOSO, Michael R.; LOWE, Christian T.; ROHANNA, John C.; SATCHIVI, Norbert M.; SIDDALL, Thomas L.; STEWARD, Kimberly M.; YERKES, Carla N.; (281 pag.)WO2019/84353; (2019); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

Name is 5-Fluoro-2-methylbenzo[d]oxazole, as a common heterocyclic compound, it belongs to benzoxazole compound, and cas is 701-16-6, its synthesis route is as follows.

General procedure: The SBOs were prepared by the base-catalysed condensation of the appropriate 5-halogeno-2-methylbenzoxazole with the requisite aromatic aldehyde under phase transfer conditions. In a typical experiment, equimolar quantities (5 mmol) of the starting materials were dissolved in dichloromethane (20-50 ml) in the presence of benzyltriethylammonium chloride (3 mmol) and stirred magnetically under a nitrogen atmosphere as an aqueous solution of sodium hydroxide (50%, w/v, 5 ml) was added dropwise over a period of 10 min. After being stirred for 2-36 h until analytical thin layer chromatography indicated that the reaction was complete, the mixture was diluted with water (50 ml) and the SBO was extracted with dichloromethane (3×20 ml), dried (MgSO4), filtered, evaporated under reduced pressure and recrystallized from aqueous methanol or ethanol.

701-16-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,701-16-6 ,5-Fluoro-2-methylbenzo[d]oxazole, other downstream synthetic routes, hurry up and to see

Reference：
Article; Ayrton, Stephen T.; Panova, Jekaterina; Michalik, Adam R.; Martin, William H.C.; Gallagher, Richard T.; Bowen, Richard D.; International Journal of Mass Spectrometry; vol. 345-347; (2013); p. 120 – 131;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

81282-60-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7-Aminobenzo[d]oxazol-2(3H)-one, cas is 81282-60-2,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

A solution of Ms20 (32 1 g, 184.8 mmol) in MeCN (200 mL) was cooled to < -5 C (ice/H20 salt) and sequentially were added a solution of N-benzyl-bis(2- hydroxyethyl)amine (16.4 g, 84.1 mmol) in MeCN (50 mL), Et3N (36 mL, 255 mmol, 3.8 eq.), and MsOH (13.1 mL, 202 mmol, 3 eq.) while maintaining the temperature below 10C. 7-Aminobenzo[d]oxazol-2(3H)-one (10.0 g, 67.2 mmol) was added as a solid and the mixture was heated to reflux. Et3N (28.5 mL, 202 mmol) was added drop- wise over a period of 1.5 hour. Reflux was maintained for 18 additional hours. The resulting clear solution was allowed to cool to RT and concentrated in vacuo at 70C. The residue was separated between NaHCC (0.8 L) and EtOAc (0.4 L). The aqueous layer was extracted with EtOAc (3 x 0.2 L). The combined organic layers were washed with brine, dried (NaiSC^) and concentrated to afford 7-(4-benzylpiperazin-l- yl)benzo[d]oxazol-2(3H)-one as a white solid (20.2 g, 65.3 mmol, 97%). The chemical industry reduces the impact on the environment during synthesis,81282-60-2,7-Aminobenzo[d]oxazol-2(3H)-one,I believe this compound will play a more active role in future production and life. Reference：
Patent; AAPA B.V.; HEERES, Andre; WILLIGERS – HOGG, Sandra; BORST, Marcus Leonardus Gerardus; DROeGE, Melloney Joyce; WO2015/69110; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem