Tag: M.W:100-200

22876-19-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chlorobenzo[d]oxazole-2(3H)-thione, cas is 22876-19-3,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

Subsequently, 5-chloro-2-mercaptobenzoxazole (3.1 g, 16.7 mmol) was dissolved in thionyl chloride (30 mL, 413 mmol). DMF (1.5 mL) was added and the reaction mixture was heated at 65 C. for 45 min. The solvent was removed under reduced pressure and to the residue was added toluene (2*60 mL) followed by evaporation each time to remove the excess SOCl2 (azetrope). The resultant crude product was dissolved in ethyl acetate (100 mL), washed with water (100 mL) and dried over Na2SO4. Evaporation of ethyl acetate gave 2,5-dichlorobenzoxazole, compound 19, as a red oil (3.2 g).

The chemical industry reduces the impact on the environment during synthesis,22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,I believe this compound will play a more active role in future production and life.

Reference：
Patent; GALLEON PHARMACEUTICALS, INC.; US2011/224269; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

81282-60-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7-Aminobenzo[d]oxazol-2(3H)-one, cas is 81282-60-2,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

Preparation of 1-(4-(trifluoromethyl)benzyl)-3-(2,3-dihydro-2-oxobenzo[d]oxazol-7-yl)urea Commercially available 4-trifluoromethylbenzylamine (1 ml, 7 mmol) was dissolved in 20 ml of AcOEt and at 0C triphosgene (2 g, 7 mmol) was added to the solution. The mixture was warmed at 80C for 4 hours then evaporated and the residue was dissolved in 5 ml of DMF. The solution of the isocyanate was added dropwise to a solution in DMF (10 ml) of compound 1c (700 mg, 4.66 mmol) and the mixture was warmed at 80C for 8 hours. (TLC AcOEt 4 / petroleum ether 6). The solvent was evaporated and the crude was dissolved in AcOEt (30 ml) and washed with water (1 X 20 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column gave 320 mg of a white solid. Yield = 19.5% 1HNMR (DMSO, 400 MHz) delta 4.41 (2H, d, J = 6 Hz), 6.67 (1H, dd, J = 7.6 Hz, J’ = 1.2 Hz), 7.00 (1H, t, J = 8 Hz), 7.09 (1H, t), 7.51 (2H, d, J = 8 Hz), 7.70 (3H, m), 8.73 (1H, s), 10.60 (1H, bs); [M+1] 352.1 (C16H12F3N3O3 requires 351.3).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7-Aminobenzo[d]oxazol-2(3H)-one, 81282-60-2

Reference：
Patent; Pharmeste S.r.l.; EP2377850; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

13673-62-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Methylthio)benzo[d]oxazole, cas is 13673-62-6,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

In order to prepare intermediate c-3, chlorosulfonic acid (3890 g; 33.3 mol) was stirred under nitrogen. Then intermediate c-2 (1288 g; 7.80 mol) was added portionwise maintaining the internal temperature below 60C by external cooling. After complete addition of intermediate b-2 the reaction mixture was stirred overnight at 85C. The heating was removed and the reaction mixture was cooled down until 65C. SOC12 was added dropwise while maintaining a controlled release of gases by good stirring. This mixture was stirred overnight at 65C. This reaction mixture was added to a well stirred mixture of EtOAc (6.9 kg) and ice (9.2kg) while maintained the temperature below 0C. The organic layer was isolated. The aqueous phase was extracted with EtOAc (3.1 KG). The combined organic layer was washed with 7.5 % NAHC03 (210 g/2.8 L water). Because the pH of this water layer was still 1, therefore another 125 g NAHC03 was added. This mixture was stirred for 1 hour, then the phases were separated. The organic layer was dried with NA2C03 (2.5 kg). After filtration 1935 g of intermediate c-3 was obtained (yield 94%, HPLC purity 94%) and used in the preparation of compound c-6.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-(Methylthio)benzo[d]oxazole, 13673-62-6

Reference：
Patent; TIBOTEC PHARMACEUTICALS LTD.; WO2005/30739; (2005); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

22876-19-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chlorobenzo[d]oxazole-2(3H)-thione, cas is 22876-19-3,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

Thionyl chloride (885 g, 7.5 mol)And N, N-dimethylformamide (270 ml) were added to a solution of 5-chloro-2-mercaptobenzoxazole (540 g, 2.903 mol) in dichloromethane (5 L) at 5-10 C.Stirred until a clear solution was formed and the reaction solution was stirred at room temperature for 4 hours.After completion of the reaction, the reaction solution was poured into 4 L of ice water, neutralized to neutral with sodium bicarbonate in 1 hour, and extracted with dichloromethane (2.5 L * 2).The organic layer was washed with brine, dried over sodium sulfate and dried to give the crude product. The crude product was washed with n-hexane (2 L * 2) at -20 C, filtered and dried to give yellow liquid 2,5-dichlorobenzo (496.8 g, 91.0%).

The chemical industry reduces the impact on the environment during synthesis,22876-19-3,5-Chlorobenzo[d]oxazole-2(3H)-thione,I believe this compound will play a more active role in future production and life.

Reference：
Patent; Shanghai ZaiQi Bio-Tech Co., Ltd.; Wang, Zhiguo; Song, Yanhong; Ma, Xiujuan; Tian, Beibei; Li, Shijiang; Li, Chao; Li, Qiang; Li, Tao; (8 pag.)CN106478537; (2017); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

5676-60-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-Methylbenzo[d]oxazol-6-amine, cas is 5676-60-8,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of compound 3 (3.37 mmol) in DMF (10 mL), charged respective compound V (a-p) (4.04 mmol) and heated to 80 C. After3 h, TLC analysis showed complete conversion of starting materials. The reaction mixture was cooled to room temperature, charged water (30 mL) and extracted with EtOAc (2 × 20 mL). The combined organic layer was washed with water (20 mL) followed by brine and concentrated under reduced pressure to obtain gummy liquid. This crude material was triturated with MTBE to afford desired product as solid and which used as such in next step without any further purification.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-Methylbenzo[d]oxazol-6-amine, 5676-60-8

Reference：
Article; Balraju, Vadla; Jogula, Sridhar; Krishna, Vagolu Siva; Meda, Nikhila; Sriram, Dharmarajan; Bioorganic Chemistry; vol. 100; (2020);,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

22876-19-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Chlorobenzo[d]oxazole-2(3H)-thione, cas is 22876-19-3,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

Step 4b. A mixture of compound from step 4a (1.6 g, 8.6 mmol), Mel (1.8 g, 12.9 mmol) and K2CO3 in DMF (20 mL) was stirred for 5 hours at 50C before was partitioned (EtO Ac-brine). The organic was dried (Na2S04), filtered and concentrated to give the desired compound (1.2 g, 70%) as a yellow oil. ESI-MS m/z =199.90, 201.90 [M+H]+. This material was used directly in the next step without further purification.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 5-Chlorobenzo[d]oxazole-2(3H)-thione, 22876-19-3

Reference：
Patent; ENANTA PHARMACEUTICALS, INC.; QIU, Yao-ling; LI, Wei; CAO, Hui; JIN, Meizhong; GAO, Xuri; PENG, Xiaowen; KASS, Jorden; OR, Yat, Sun; (84 pag.)WO2016/183266; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

Name is Benzo[d]oxazole-2-thiol, as a common heterocyclic compound, it belongs to benzoxazole compound, and cas is 2382-96-9, its synthesis route is as follows.

General procedure: A mixture of thiol (1 mmol), hydrogen peroxide (0.5 mL) and the catalyst (0.005 g) in ethanol (2 mL) was stirred at ambient temperature. Reaction progress was monitored by TLC (acetone: n-hexane, 2:8). After completion of the reaction, catalyst was separated by an external magnet and washed with ethyl acetate; next, the product was extracted with ethyl acetate (5 mL 9 4). The organic layer was dried over anhydrous Na2SO4 (1.5 g). Finally, the organic solvents were evaporated, and the corresponding disulfides were obtained in high to excellent yields (88-98%).

2382-96-9, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,2382-96-9 ,Benzo[d]oxazole-2-thiol, other downstream synthetic routes, hurry up and to see

Reference：
Article; Shiri, Lotfi; Ghorbani-Choghamarani, Arash; Kazemi, Mosstafa; Research on Chemical Intermediates; vol. 43; 5; (2017); p. 2707 – 2724;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

64037-15-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5-Methyl-2-aminobenzoxazol, cas is 64037-15-6,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

A solution of succinic anhydride (141.1 g, 1.41 mol) and 70 g (about 0.47 mol) of compound of step 1a (70 g, 0.47 mol) in 2500 ml of anhydrous toluene was refluxed for overnight. After that, HATU (100 g, 0.26 mol) and 4-methylmorpholine (41.36 ml, 0.376 mol) were added and the resulting mixture was refluxed for 2-3 hours. TLC showed that the major spot was product (Rf=0.35, acetone_hexane=1:2). After reaction was completed, the solvent was evaporated and the residue was dissolved in about 2000 ml of CH2Cl2. The solution was washed with aqueous NaHCO3. After pH was adjusted to 7-8 and washed with brine, organic phase was separated and dried over MgSO4. Filtration and removal of solvent gave the title compound (98 g) as fine white needle crystalline

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 5-Methyl-2-aminobenzoxazol, 64037-15-6

Reference：
Patent; Wang, Guoqiang; Phan, Ly Tam; Or, Yat Sun; Qiu, Yao-ling; Niu, Deqiang; Peng, Yulin; Busuyek, Marina; Wang, Yanchun; Nakajima, Suanne; US2006/252712; (2006); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]oxazol-2-amine, cas is 4570-41-6,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

(Step 1) Synthesis of (R)-tert-butyl 3-(4-amino-3-((benzo[d]oxazol-2-yl)carbamoyl)-1H-pyrazolo[3,4-d]pyrimidin-1-yl)piperidine-1-carboxylate (0190) 300 mg of (R)-tert-butyl 3-(4-amino-3-iodo-1H-pyrazolo[3,4-d]pyrimidin-1-yl)piperidine-1-carboxylate obtained in Reference Example 1 was dissolved in 3 mL of NMP. 118 mg of benzo[d]oxazol-2-amine, 20 mg of xantphos, and 0.15 mL of N-methylmorpholine were added thereto, and a degassing operation was carried out. Thereafter, 7.6 mg of palladium acetate was added thereto, and under a carbon monoxide atmosphere, the mixture was heated to 110° C. and stirred for 2 hours. After the mixture was cooled, 4.5 mL of methanol and 0.45 mL of a 5 N aqueous solution of sodium hydroxide were added thereto, and the mixture was stirred for 30 minutes at room temperature. Thereafter, the pH was adjusted to 5.3 with 2 N HCl, and a solid thus obtained was collected by filtration. The crude product was purified by a silica gel column (chloroform-methanol), and thus 257 mg of the title compound was obtained as a white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Benzo[d]oxazol-2-amine, 4570-41-6

Reference：
Patent; TAIHO PHARMACEUTICAL CO., LTD.; OSHIUMI, Hiromi; (27 pag.)US2017/44166; (2017); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

Name is 2-Benzoxazolinone, as a common heterocyclic compound, it belongs to benzoxazole compound, and cas is 59-49-4, its synthesis route is as follows.

Intermediate 6: Synthesis of 3-methyl-2-oxo-2,3-dihydrobenzo[d]oxazole-6-sulfonyl chloride; 1. Synthesis of 3-methylbenzo[d]oxazol-2 (3H)-one; Sodium hydride (7.00 mmol) was added to a chilled (0 C.) solution of benzo[d]oxazol-2(3H)-one (4.81 mmol) in tetrahydrofuran (20 mL) and the reaction mixture was maintained for 30 min. Methyl iodide (7.25 mmol) was added dropwise and the reaction mixture was maintained for 6 h at rt. The reaction mixture was diluted with ethanol (10 mL) and the mixture was concentrated. The residue was diluted with water (50 mL) and was extracted with dichloromethane (3×20 mL). The combined organic layers were dried (sodium sulfate), filtered and concentrated to afford 3-methylbenzo[d]oxazol-2 (3H)-one in 82% yield as a light red solid.

59-49-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,59-49-4 ,2-Benzoxazolinone, other downstream synthetic routes, hurry up and to see

Reference：
Patent; Memory Pharmaceuticals Corporation; US2010/16297; (2010); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem