Tag: M.W:100-200

22876-19-3, 5-Chlorobenzo[d]oxazole-2(3H)-thione is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3: Preparation of 2, 5-dichloro-1 ,3-benzoxazole.5-chloro-1 ,3-benzoxazole-2-thiol (8.09 g, 43.6 mmol) dissolved in CHCI3 (65 mL) and stirred at ice bath for 10 minutes. Chlorine gas was bubbled into the solution for 10 minutes. The reaction mixture was further stirred at room temperature overnight. The reaction mixture was poured into ice water (70 mL) and extracted with aq. 2N NaOH (30mLx2), then ice water (30mL). The CHCI3 solution was allowed to stand for 10 minutes, then filtered through a plug of silica gel to give clear solution. The solvent was removed under reduced pressure to afford semi-oil crude product. The crude product was dissolved in CHCI3 (25 mL) and filtered through diatomaceous earth. The solvent was removed under reduced pressure to give the title compound as a solid., 22876-19-3

22876-19-3 5-Chlorobenzo[d]oxazole-2(3H)-thione 708870, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; PFIZER INC.; SPRINGER, John, Robert; VAZQUEZ, Michael, Lawrence; WO2011/77313; (2011); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

77186-95-9, Benzo[d]oxazol-2-ylmethanol is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,77186-95-9

2.98 g (20.0 mmol) of 2-hydroxymethylbenzoxazole, 2.23 g (22.0 mmol) of triethylamine, 0.04 g (0.6 mmol) of 3,5-di-tert-butyl-4-hydroxytoluene were added to a 100 ml recovery flask. 2 mmol) and tetrahydrofuran 40 ml were added to prepare a reaction solution.After the reaction solution was cooled to 0 C., 2.30 g (22.0 mmol) of methacryloyl chloride was added dropwise and the mixture was stirred at room temperature for 3 hours, and the precipitated triethylamine hydrochloride was filtered off. Subsequently, the reaction solution was concentrated, and the extracting operation with 20 ml of ethyl acetate was carried out three times, and the extracted solutions were mixed and concentrated to obtain 4.09 g of a yellow liquid (yield: 94%).

As the paragraph descriping shows that 77186-95-9 is playing an increasingly important role.

Reference£º
Patent; SHIKOKU CHEMICALS CORPORATION; OKUMURA, NAOTO; IKEDA, YUICHI; (27 pag.)JP2015/20962; (2015); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6, Benzo[d]oxazol-2-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4570-41-6

The reaction mixture of 2-aminobenzoxazole (0.25 g; 1.86 mmol) and salicylaldehyde (0.230 g; 1.86 mmol) dissolved in 40 cm3 of dry toluene containing 3 drops of piperidine was heated at reflux temperature for 6 hours under nitrogen. The initial yellow solution of the reaction mixture turned orange and was allowed to cool down to room temperature after the reflux period and thereafter left overnight in the fridge in order to induce precipitation. The resultant yellow precipitate was filtered and washed with cold anhydrous toluene and petroleum ether. Yield = 80percent, M.P. = 136 ? 138 ¡ãC. IR (numax/cm-1): nu(N-H) 3339, nu(O-H) 3056 (w), nu(C=O) 1706 (m), nu(C=N) 1601 (vs), nu(C-N) 1244 (s). 1H NMR (295K/ppm, see Fig. S2): 9.68 (s, 1H, NH), 7.98 (d, 1H, H5), 7.75 ? 7.67 (m, 2H, H2, H3), 7.54 (t, 1H, H4), 7.43 ? 7.35 (m, 2H, H10, H11), 7.07 ? 6.98 (m, 2H, H9, H12), 3.36 (br, s, 1H, OH). UV-Vis (DMF, (lambdamax (epsilon, M-1cm-1))): 241 nm (10974); 282 nm (8712); 330 nm (15707); 351 nm (16979); 383 nm (20673).

The synthetic route of 4570-41-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Booysen, Irvin Noel; Adebisi, Abimbola; Akerman, Matthew Piers; Inorganica Chimica Acta; vol. 433; (2015); p. 13 – 20;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

3889-13-2,3889-13-2, 5-Nitro-2,3-dihydro-1,3-benzoxazol-2-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: One of 4a-d (1 equiv.) and K2CO3 (3 equiv.) in DMF was stirred at 90C for 1h, then the solution was allowed to cool to 60C and was added different substituted benzyl chlorides or phenyl ethyl chlorides (3 equiv.). The reaction mixture was stirred at 60C for another 7h and allowed to cool to room temperature. The saturated NH4Cl solution was added to quench the reaction. The mixture was diluted with water and extracted with ethyl acetate to afford the crude product that was purified by flash column chromatography on silica gel to yield the target products.

The synthetic route of 3889-13-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zou, Yi; Wang, Yan; Wang, Fang; Luo, Minghao; Li, Yuezhen; Liu, Wen; Huang, Zhangjian; Zhang, Yihua; Guo, Wenjie; Xu, Qiang; Lai, Yisheng; European Journal of Medicinal Chemistry; vol. 138; (2017); p. 199 – 211;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3889-13-2,5-Nitro-2,3-dihydro-1,3-benzoxazol-2-one,as a common compound, the synthetic route is as follows.

Synthesis of 5-aminobenzo[d]oxazol-2(3H)-one (39-2) (0488) The mixture of 39-1 (5.1 g, 28.31 mmol), Pd/C (0.5 g) and HCO2NH4 (8.9 g, 141.57 mmol) in MeOH (200 mL) was stirred at room temperature overnight. Filtered with kiselguhr, concentrated in vacuo, the residue was added 5% NaHCO3 solution, collected the solid and washed with water (50 mL), dried in vacuo to get compound 39-2 as a brown solid (4 g, yield 94%)., 3889-13-2

As the paragraph descriping shows that 3889-13-2 is playing an increasingly important role.

Reference£º
Patent; Nivalis Therapeutics, Inc.; Wasley, Jan; Rosenthal, Gary J.; Sun, Xicheng; Strong, Sarah; Qiu, Jian; US9138427; (2015); B2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.177492-52-3,Benzo[d]oxazol-6-amine,as a common compound, the synthetic route is as follows.

A mixture of 5-amino-3-(trifluoromethyl)picolinonitrile (Intermediate 1 , 110 mg, 0.59 mmol), benzo[d]oxazol-6-amine (Intermediate 79, 125 mg, 0.59 mmol), and thiophosgene (0.05 mL, 0.60 mmol) in anhydrous DMA (3 mL) was stirred at 60C for 16h. Methanol (3 mL) and 2M HC1 (1.5 mL) were then added and the mixture was heated at 90C for 2h. The reaction mixture was cooled and poured into ice/water (40 mL) and the resultant solid was filtered to afford 150 mg of 5-(5-(4-amino-3-hydroxyphenyl)-8-oxo-6-thioxo-5,7-diazaspiro[3.4]octan-7- yl)-3-(trifluoromethyl)picolinonitrile as a brown powder. LCMS [M + 1]+ 434.0.

177492-52-3, The synthetic route of 177492-52-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ARAGON PHARMACEUTICALS, INC.; SMITH, Nicholas, D.; BONNEFOUS, Celine; JULIEN, Jackaline, D.; WO2011/103202; (2011); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4570-41-6,Benzo[d]oxazol-2-amine,as a common compound, the synthetic route is as follows.

Step 1:To a solution of 4-fluorophenylacetic acid (1.0 g, 6.5 mmol) and 2-amino-benzoxazole (850 mg, 6.5 mmol) in CH2Cl2 (50 mL) was added DMAP (237 mg, 1.9 mmol) and EDC.HCl (1.5 g, 7.8 mmol).The reaction mixture was stirred at room temperature over night.The reaction mixture was concentrated in vacuo.Purification by chromatography (silica, 30percent ethyl acetate/CH2Cl2) afforded N-benzooxazol-2-yl-2-(4-fluorophenyl)acetamide (1.44 g, 82percent): 1H NMR (300 MHz, DMSO-d6) delta ppm 3.85 (s, 2H) 7.11-7.21 (m, 2H) 7.23-7.44 (m, 4H) 7.52-7.69 (m, 2H).

As the paragraph descriping shows that 4570-41-6 is playing an increasingly important role.

Reference£º
Patent; Brotherton-Pleiss, Christine E.; Walker, Keith A. M.; US2012/149718; (2012); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.128156-54-7,Methyl benzo[d]oxazole-4-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To a degassed solution (N2 was purged for 10 min) of methyl 1,3-benzoxazole-4-carboxylate (150 mg, 0.847mmol) and N-(2-iodophenyl)benzamide 2a (273 mg, 0.847 mmol) in anhydrous toluene (4ml) , CuI (32 mg, 0.169 mmol), xantphos (98 mg, 0.169 mmol), Pd(OAc)2 (10 mg, 0.042 mmol), Cs2CO3 (685 mg, 2.117 mmol) were added at room temperature under nitrogen atmosphere. Reaction mixture was continued for 20 hours at reflux condition. After the completetion of the reaction (monitored by TLC), Reaction mixture was filtered through celite bed and washed with methanol (10 ml),filtrate was concentrated. Crude mass which was purified by column chromatography over silica gel (230-400 mesh) using DCM-Methanol (1:9) as elutant to affordthe products 3a (284 mg) as white solid. All the other compounds 3b-3r were prepared similarly following the above procedure.

128156-54-7, The synthetic route of 128156-54-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Sasmal, Swarnendu; Sen, Indira; Hall, Roger G.; Pal, Sitaram; Tetrahedron Letters; vol. 56; 11; (2015); p. 1374 – 1377;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

81282-60-2, 7-Aminobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

81282-60-2, Example 1g. Preparation of bifeprunox MESYLATE (crude) A solution of 128.9 g of 3-[[BIS (2-HYDROXYETHYL) amino] METHYL]-1, 1′-biphenyl in approximately 750 ml of methylethylketone prepared according to Example 1f was stirred under mild nitrogen purge. In a separate vessel 202 g of METHANESULFONIC anhydride was dissolved in in 600 ml of methylethylketone at 10-20C. To the solution OF 3-[[BIS (2-HYDROXYETHYL) amino] METHYL]-1, 1′-biphenyl in methylethylketone 212.8 g of triethylamine was added and 60 ml of methylethylketone. The solution of methanesulfonic anhydride was added in about 45-60 minutes to the 3- [ [BIS (2- hydroxyethyl) AMINO] METHYL]-1, 1 -BIPHENYL/TRIETHYLAMINE solution, while maintaining the temperature below 10C. 60 ml of methylethylketone was added and the mixture was stirred for another 15 minutes, followed by drop wise addition of 109.7 g of METHANESULFONIC acid and addition of 60 mi of methylethylketone in order to rinse the addition vessel. 71.3 g of 7-amino-2 (3H)-BENZOXAZOLONE, prepared according to Example 1E was suspended in 100 mi of methylethylketone and added to the reaction mixture followed by 60 ml of methylethylketone. The reaction mixture was heated to reflux and refluxed during 20-24 hours. After 20-24 hours of reflux 48 ml of water was added and the mixture was refluxed again for 1 hour. 420 ml of methylethylketone was added and 490 ml of methylethylketone/water was distilled of. This last step was rep eated three times. 46. 1 G of METHANESULPHONIC acid was added, the mixture was refluxed for an additional hour and cooled down to room temperature in 1 hour. The mixture was further cooled down to 0-5C and stirred at this temperature for another hour. The solid was filtered off and, washed twice with 75 ml of cold METHYLETHYLKETONE, and dried at 50C and 100 mbar under a gentle nitrogen stream till dry. Yield about 76%.

As the paragraph descriping shows that 81282-60-2 is playing an increasingly important role.

Reference£º
Patent; SOLVAY PHARMACEUTICALS B.V.; WO2005/16898; (2005); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6, Benzo[d]oxazol-2-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 33 N-Benzooxazol-2-yl-3-cyclopentyl-2-(4-methanesulfonyl-3-nitro-phenyl)-propionamide A solution of 3-cyclopentyl-2-(4-methanesulfonyl-3-nitrophenyl)-propionic acid (prepared as in Example 32, 50 mg, 0.15 mmol), triethylamine (0.060 mL, 0.44 mmol), benzotriazol-1-yloxy-tris(dimethylamino)phosphonium hexafluorophosphate (98 mg, 0.22 mmol), and 2-aminobenzoxazole (30 mg, 0.22 mmol) in N,N-dimethylformamide (3 mL) was stirred at 25¡ã C. for 3 h. The reaction mixture was then diluted with water (25 mL), a 1N aqueous hydrochloric acid solution (5 mL), and ethyl acetate (25 mL). The layers were separated. The resulting organic layer was washed with a saturated aqueous sodium chloride solution (1*25 mL), dried over magnesium sulfate, filtered, and concentrated in vacuo. Flash chromatography (Merck Silica gel 60, 230-400 mesh, 2/1 hexanes/ethyl acetate) afforded N-benzooxazol-2-yl-3-cyclopentyl-2-(4-methanesulfonyl-3-nitro-phenyl)-propionamide (13 mg, 19.5percent) as a yellow solid: mp 106-110¡ã C.; EI-HRMS m/e calcd for C22H23N3O6S (M+) 457.1308, found 457.1323.

4570-41-6, 4570-41-6 Benzo[d]oxazol-2-amine 20707, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Corbett, Wendy Lea; Grimsby, Joseph Samuel; Haynes, Nancy-Ellen; Kester, Robert Francis; Mahaney, Paige Erin; Sarabu, Ramakanth; US2002/103199; (2002); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem