Tag: M.W:100-200

64037-15-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64037-15-6,5-Methyl-2-aminobenzoxazol,as a common compound, the synthetic route is as follows.

A solution of succinic anhydride (141.1 g, 1.41 mol) and 70 g (about 0.47 mol) of compound of step 1a (70 g, 0.47 mol) in 2500 ml of anhydrous toluene was refluxed for overnight. After that, HATU (100 g, 0.26 mol) and 4-methylmorpholine (41.36 ml, 0.376 mol) were added and the resulting mixture was refluxed for 2-3 hours. TLC showed that the major spot was product (Rf=0.35, acetone_hexane=1:2). After reaction was completed, the solvent was evaporated and the residue was dissolved in about 2000 ml of CH2Cl2. The solution was washed with aqueous NaHCO3. After pH was adjusted to 7-8 and washed with brine, organic phase was separated and dried over MgSO4. Filtration and removal of solvent gave the title compound (98 g) as fine white needle crystalline

64037-15-6 5-Methyl-2-aminobenzoxazol 46388, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Wang, Guoqiang; Phan, Ly Tam; Or, Yat Sun; Qiu, Yao-ling; Niu, Deqiang; Peng, Yulin; Busuyek, Marina; Wang, Yanchun; Nakajima, Suanne; US2006/252712; (2006); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6, Benzo[d]oxazol-2-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4570-41-6

General procedure: To a solution of carboxylic acid 3 in 3 mL dimethylformamide,were added trimethylamine (3 equiv), EDCI (1.2 equiv) and HOBt( 1.2 equiv) under ice-bath. After stirring at room temperature for30 min, amines (1 equiv) were added and the resulting mixture stirred for 24 h at room temperature. Reaction was detected byTLC (EtOAc/Hex 2:1). After completion of reaction, the mixture was diluted with water and extracted with ethyl acetate. The combined organic layers were washed by brine, dried over MgSO4 and concentrated. The crude product was further purified by silica gel chromatography eluted with EtOAc/Hex 2:1 to afford pure desired compound. 4.1.3.8 N-(Benzoxazol-2-yl)-5-(4-(4-chlorophenyl)piperazin-1-yl)pentanamide (4h¡¤HCl) The compound 4h was prepared from 3c and 2-aminobenzoxazole as a colorless solid (yield: 24.7percent). The free base was further converted into 4h¡¤HCl as a white solid. Mp: 78-79 ¡ãC. 1H NMR (300 MHz, DMSO-d6) delta 11.19 (s, 1H), 9.80 (s, 2H), 7.59 (d, J = 7.7 Hz, 1H), 7.40 (dd, J = 7.7, 1.2 Hz, 1H), 7.36-7.19 (m, 4H), 7.01 (d, J = 9.0 Hz, 2H), 3.78 (d, J = 12.1 Hz, 2H), 3.50 (d, J = 10.9 Hz, 2H), 3.14 (m, 6H), 2.37 (t, J = 7.3 Hz, 2H), 1.75 (m, 2H), 1.63-1.47 (m, 2H).

The synthetic route of 4570-41-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Cao, Yongkai; Paudel, Suresh; Zhang, Xiaowei; Kim, Kyeong-Man; Cheon, Seung Hoon; Bioorganic and Medicinal Chemistry; vol. 23; 17; (2015); p. 5264 – 5272;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64037-15-6,5-Methyl-2-aminobenzoxazol,as a common compound, the synthetic route is as follows.,64037-15-6

To a 50 ml three-necked flask was added 5-methylbenzoxazol-2-amine, 10 ml of tetrahydrofuran, 5 ml of triethylamine. The acid chloride was then dissolved in 10 ml of dry tetrahydrofuran, Below 5 deg C under the conditions of slow drop, The reaction was stirred at room temperature for 4 h. 40 ml of saturated aqueous sodium chloride solution was added,The aqueous phase was extracted three times with 25 ml of dichloromethane, Combine the organic phase. Column separation, Dichloromethane: methanol 60: 1 to give 1.39 g of a white solid, M.p. 174 to 176 C, yield: 70.6%.

The synthetic route of 64037-15-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Institute of Medicinal Biotechnology, Chinese Academy of Medical Sciences; Si, Shuyi; Gao, Nana; Jiang, Wei; Jiang, Jiandong; Li, Yan; Li, Dongsheng; Li, Yongzhen; Zhang, Jing; Zhu, Ningyu; Wang, Zhimin; (20 pag.)CN103772376; (2017); B;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

4570-41-6,4570-41-6, Benzo[d]oxazol-2-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of 4-chloro-6-methylpyrimidin-2-amine (1)(1 mmol) in dry ethanol (4 ml), benzoxazol-2-amine (2a)/benzothiazol-2-amine (2b)/1H-benzimidazol-2-amine (2c)(1.1 mmol) and a catalytic amount of methanesulfonic acid(0.2 ml) were added and refluxed for 5?7 h. After completionof the reaction the contents were cooled and dilutedwith water (15 ml). The separated solid was filtered, washedwith water, dried and recrystallized from 2-propanol. N4-(1,3-Benzoxazol-2-yl)-6-methyl-2,4-pyrimidinediamine(4a)Red solid; yield 74percent; m.p. 138?140 ¡ãC; IR (KBr) vmax 3478(NH2), 3381, 3320 (NH), 1578 (C=N) cm?1; 1H NMR(DMSO?d6, 400 MHz): delta = 2.47 (s, 3H, CH3), 7.01 (s, 1H,C5?H), 7.12 (s, 2H, NH2), 7.33?7.49 (m, 4H, Ar?H), 8.27(bs, 1H, NH); 13C NMR (DMSO?d6, 100 MHz): delta = 24.9(CH3), 96.1 (C?5), 160.4 (C?2?), 164.4 (C?2), 167.5 (C?6),171.9 (C?4), 112.3, 121.6, 125.9, 126.7, 143.4, 152.5(aromatic carbons); MS (m/z): 241.25 [M+]. Anal. Calcd.for C12H11N5O: C, 59.74; H, 4.60; N, 29.03. Found: C,59.86; H, 4.62; N; 29.24.

The synthetic route of 4570-41-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Seenaiah, Dandu; Rekha, Tamatam; Padmaja, Adivireddy; Padmavathi, Venkatapuram; Medicinal Chemistry Research; vol. 26; 2; (2017); p. 431 – 441;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

177492-52-3, Benzo[d]oxazol-6-amine is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of the appropriate amine (1M-3M, 2 mmol) and the appropriate aldehyde (2.2 mmol) in ethanol (10 mL) was stirred at room temperature for 8 h., 177492-52-3

177492-52-3 Benzo[d]oxazol-6-amine 584120, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Article; Zhang, Da-Jun; Sun, Wen-Fang; Zhong, Zhao-Jin; Gao, Rong-Mei; Yi, Hong; Li, Yu-Huan; Peng, Zong-Gen; Li, Zhuo-Rong; Molecules; vol. 19; 1; (2014); p. 925 – 939;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.128156-54-7,Methyl benzo[d]oxazole-4-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To a degassed solution (N2 was purged for 10 min) of methyl 1,3-benzoxazole-4-carboxylate (150 mg, 0.847mmol) and N-(2-iodophenyl)benzamide 2a (273 mg, 0.847 mmol) in anhydrous toluene (4ml) , CuI (32 mg, 0.169 mmol), xantphos (98 mg, 0.169 mmol), Pd(OAc)2 (10 mg, 0.042 mmol), Cs2CO3 (685 mg, 2.117 mmol) were added at room temperature under nitrogen atmosphere. Reaction mixture was continued for 20 hours at reflux condition. After the completetion of the reaction (monitored by TLC), Reaction mixture was filtered through celite bed and washed with methanol (10 ml),filtrate was concentrated. Crude mass which was purified by column chromatography over silica gel (230-400 mesh) using DCM-Methanol (1:9) as elutant to affordthe products 3a (284 mg) as white solid. All the other compounds 3b-3r were prepared similarly following the above procedure.

128156-54-7, 128156-54-7 Methyl benzo[d]oxazole-4-carboxylate 14616761, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Article; Sasmal, Swarnendu; Sen, Indira; Hall, Roger G.; Pal, Sitaram; Tetrahedron Letters; vol. 56; 11; (2015); p. 1374 – 1377;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

81282-60-2, 7-Aminobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

81282-60-2, Step 4 3-Ethoxy-4-(2-oxo-2,3-dihydrobenzooxazol-7-ylamino)cyclobut-3-ene-1,2-dione A mixture of 0.247 g of 7-amino-3H-benzooxazol-2-one (1.6 mmol, 1 eq) and 0.36 ml of 3,4-diethoxycyclobut-3-ene-1,2-dione (2.5 mmol, 1.5 eq) in 9 ml of ethanol was stirred at ambient temperature for 2 days (formation of a precipitate). Ethanol was added in order to promote the fall of the precipitate, which was filtered off, washed with diethyl ether and dried under vacuum at 45 C. 0.35 g of product was obtained in the form of a light khaki solid. Yield=78%.

81282-60-2 7-Aminobenzo[d]oxazol-2(3H)-one 11147814, abenzoxazole compound, is more and more widely used in various fields.

Reference£º
Patent; Musicki, Branislav; Aubert, Jerome; Boiteaux, Jean-Guy; Clary, Laurence; Rossio, Patricia; Schuppli-Nollet, Marlene; US2014/309208; (2014); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5676-60-8,2-Methylbenzo[d]oxazol-6-amine,as a common compound, the synthetic route is as follows.,5676-60-8

General procedure: In the vessel of a microwave reactor, 12 (400 mg, 1.13 mmol), 2-aminopyridine (318 mg, 3.38 mmol), Pd2(dba)3 (51.6 mg,56.4 lmol), 2-dicyclohexylphosphino-20,40,60-triisopropyl-1,10-biphenyl (26.9 mg, 56.4 lmol), and K2CO3 (312 mg, 2.25 mmol)were suspended in t-BuOH (3 mL). The vessel was then sealed,and the mixture was reacted at 130 C for 1 h under microwaveirradiation. After cooling to room temperature, the mixture wasextracted with CHCl3/MeOH (4:1), and washed with brine. Theorganic layer was separated, dried over MgSO4, and concentratedunder reduced pressure. The residue was purified by NH silicagel column chromatography (CHCl3/MeOH = 100:0 to 90:10) togive the title compound (362 mg, 78%). 1H NMR (400 MHz,DMSO-d6) d: 1.27-1.38 (2H, m), 1.41 (9H, s), 1.95-2.02 (2H, m),2.96-3.10 (2H, m), 3.43-3.53 (1H, m), 3.80-3.88 (2H, m), 6.83-6.87 (1H, m), 7.07 (1H, br), 7.22 (1H, s), 7.62-7.66 (2H, m), 7.80(1H, br), 8.20-8.22 (1H, m), 8.40 (1H, s), 8.70 (1H, d, J = 7.2 Hz),9.47 (1H, s). MS (ESI) m/z: 413 (M+H)+.

The synthetic route of 5676-60-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Nakajima, Yutaka; Aoyama, Naohiro; Takahashi, Fumie; Sasaki, Hiroshi; Hatanaka, Keiko; Moritomo, Ayako; Inami, Masamichi; Ito, Misato; Nakamura, Koji; Nakamori, Fumihiro; Inoue, Takayuki; Shirakami, Shohei; Bioorganic and Medicinal Chemistry; vol. 24; 19; (2016); p. 4711 – 4722;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

A common heterocyclic compound, the benzoxazole compound, name is 5-Bromobenzo[d]oxazole,cas is 132244-31-6, mainly used in chemical industry, its synthesis route is as follows.,132244-31-6

In the reaction flask, Under argon, a catalyst (9.9 mg, 0.025 mmol, 5 mol%), potassium tert-butoxide (0.0672 g, 0.6 mmol) DMF (3.0 ml), 5-bromobenzoxazole (99.01 mg, 0.5 mmol) was added to the carbon dioxide gas, and the reaction was stirred at 80 C for 18 hours under normal pressure. Cooled to 65 C, methyl iodide (93 mul, 1.5 mmol) was added, The reaction was stirred at 65 C for 1 hour. Cooled to room temperature, the reaction was terminated with deionized water, The reaction product was extracted with ethyl acetate and purified by column chromatography (Using a mixed solvent of ethyl acetate / petroleum ether in a volume ratio of 1:10 as a developing solvent) The yield was 85%.

As the rapid development of chemical substances, we look forward to future research findings about 132244-31-6

Reference£º
Patent; Soochow University (Suzhou); Sun Hongmei; Liu Ling; Zhu Fan; Zhou Qiaoyun; (10 pag.)CN106565623; (2017); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

90322-32-0,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.90322-32-0,2-Methylbenzo[d]oxazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

Step 2 – Preparation of Intermediate H 5-Carboxy-2-methylbenzoxazole (8.9 g) and methyl- p -toluenesulfonate (11.16 g) were combined and heated to 200C with stirring for 10 minutes. The mixture became a brown liquid and mild boiling occured. The reaction was cooled to room temperature and the liquid solidified. Acetone (50 ml) was added, and with constant heating at reflux, the product was broken up with a spatula. The resulting slurry was heated at reflux for 15 minutes with rapid stirring and the off-white product was collected by filtration. This product was slurried again in refluxing acetone for 30 minutes, filtered, washed with ligroin P950, and dried to yield 9.3 g of 5-carboxy-2,3-dimethylbenzoxazolium p -toluenesulfonate (Intermediate H).

The synthetic route of 90322-32-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; EASTMAN KODAK COMPANY, (a New Jersey corporation); EP294461; (1991); B1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem