Tag: M.W:200-300

19932-85-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Bromobenzo[d]oxazol-2(3H)-one, cas is 19932-85-5,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

[0156j Triethylamine (0.72 g, 1.0 mL, 7.1 mmol) was added to a stirring a mixture of 6- bromo-2benzoxazilinone (0.89 g, 4.2 mmol) and trityichioride (1.21 g, 4.4 mmol) in CH2C12 (10 mL) for a period of 10 mm. The reaction was monitored by TLC (silica gel) and concentrated after 1 h. The concentrate was diluted with water and sonicated to form a heterogeneous solution. The resulting off-white solid was suction filtered and dried to provide 1 -trityl-6-bromo-2- benzoxazilinone (2.0 g). LCMS: rt 9.45 mm (A), purity 96 %, MS (mle) 456 (MHj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-Bromobenzo[d]oxazol-2(3H)-one, 19932-85-5

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; SINGH, Rajinder; BHAMIDIPATI, Somasekhar; DING, Pingyu; PAYAN, Donald; GELMAN, Marina; KINSELLA, Todd; WO2015/157093; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to benzoxazole compound, name is 6-Bromo-2-methylbenzo[d]oxazole, and cas is 151230-42-1, its synthesis route is as follows.

(1) 2-methyl-5-bromobenzoxazole (1 mol), p-toluenesulfonic acid diethylene glycol ester (3 mol) was placed in 20 mL of dry toluene, and heated under reflux for 12 hours under nitrogen atmosphere.It was cooled to room temperature, washed with anhydrous diethyl ether and recrystallized from acetone to give a white-yellow solid quaternary ammonium salt (II4d)

151230-42-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,151230-42-1 ,6-Bromo-2-methylbenzo[d]oxazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Shenzhen University; Yang Zhigang; Qu Junle; (65 pag.)CN110128843; (2019); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

It is a common heterocyclic compound, the benzoxazole compound, 6-Bromobenzo[d]oxazol-2(3H)-one, cas is 19932-85-5 its synthesis route is as follows.

General procedure: The crude product above (2.0mmol) was dissolved in DMF (20mL). The corresponding benzo[d]oxazol-2(3H)-one (2.4mmol) and Cs2CO3 (782mg, 2.4mmol) was added to the solution. The reaction mixture was stirred at 50C for 5h and then cooled to room temperature. The mixture was diluted with water (40mL) and then was extracted with ethyl acetate (20mL¡Á3). The combined organic layer was washed by saturated sodium chloride solution for three times, dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was purified by silica gel chromatography to afford 11. White solid (27%, 4 steps). 1H NMR (300MHz, CDCl3) delta 8.73 (d, J=5.1Hz, 1H), 8.20 (s, 1H), 7.81 (d, J=8.9Hz, 1H), 7.55 (d, J=8.7Hz, 1H), 7.41 (s, 1H), 7.39 (s, 1H), 7.06 (d, J=8.8Hz, 1H), 6.72 (d, J=5.3Hz, 1H), 4.52 (t, J=4.9Hz, 2H), 4.39 (d, J=5.2Hz, 2H). MS (ESI): 463.1 [M+H]+. Purity: >95%

19932-85-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,19932-85-5 ,6-Bromobenzo[d]oxazol-2(3H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Lu, Dong; Shen, Aijun; Liu, Yang; Peng, Xia; Xing, Weiqiang; Ai, Jing; Geng, Meiyu; Hu, Youhong; European Journal of Medicinal Chemistry; vol. 115; (2016); p. 191 – 200;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to benzoxazole compound, name is 6-Bromobenzo[d]oxazol-2(3H)-one, and cas is 19932-85-5, its synthesis route is as follows.

General procedure: To a stirred solution of tert-butyl 6-nitro-2-oxo-2,3-dihydro-1H-benzo[d]imidazole-1carboxylate (CAS: 438200-95-4) (630 mg, 2.26 mmol), 2-(4-(methylsulfonyl)piperazin-1-ylethanol (CAS: 72388-13-7) (940 mg, 4.52 mmol) and PPh; (11186 mg, 4.52 mmol) in THF (30 mL) under Ar atmosphere at 0 C was added DEAD (984 mg, 5.65 mmol). The reaction mixture was stirred under Ar atmosphere at 50 C overnight. The reaction mixture was diluted with H2,O (50 mL) and extracted with EtOAc (3 X 50 mL). The combined organic extracts were washed with brine (SO mL), dried over anhydrous Na2SOuq,filtered and the filtrate was concentrated. The residue was purified bysilica gel chromatography (PE: EA = 1:1, v/v). The fractions were concentrated. The residue was dissolved in PE/EA(3/1, v/v, 20 mL), stirred at room temperature for 16 h, during which time white precipitate was formed. The mixture was filtered and the filter cake was collected to give intermediate 139 (1.36 g, 59% yield) as a white solid. Intermediates 212, 213, and 214 CHCI salt) were prepared respectively via an analogous reaction protocol as described for the preparation offollowing intermediates in the column ?Method used?

19932-85-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,19932-85-5 ,6-Bromobenzo[d]oxazol-2(3H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; JANSSEN PHARMACEUTICA NV; JOHNSON & JOHNSON (CHINA) INVESTMENT LTD.; DAI, Xuedong; QUEROLLE, Olivier Alexis Georges; KROSKY, Daniel Jason; CAI, Wei; FU, Liqiang; KONG, Linglong; LIU, Yingtao; WAN, Zhao-Kui; HERKERT, Barbara; PANDE, Vineet; EDWARDS, James Patrick; PATRICK, Aaron Nathaniel; ANGIBAUD, Patrick Rene; PONCELET, Virginie Sophie; (488 pag.)WO2019/120209; (2019); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to benzoxazole compound, name is 6-Bromobenzo[d]oxazol-2(3H)-one, and cas is 19932-85-5, its synthesis route is as follows.

General procedure: IV, e.g. bromo-substituted 3H-1,3-benzoxazol-2-one, (1 eq.) was suspended in a 1:1 toluene/EtOH mixture (10 mL per mmol IV). The boronic acid V (1.5 eq.) was added followed by aq. NaCO3 (2 M, 0.55 mL per mmcl IV, 1.1 eq.). The resulting suspension was degassed undernitrogen for 10 mm, followed by addition of Pd(PPh3)4 (0.1 eq.) and heating under microwave irradiation at 100 C for 30 mm. The reaction mixture was diluted with EtOAc (40 mL per mmcl IV), and water (40 mL per mmcl IV) was added. The two phases were separated and the aqueous layer was extracted with EtOAc (2 x 40 mL per mmcl IV). The combined organic phases were dried over Na2SO4, evaporated on silica, and the compound was purified by column chromatography using the Teledyne ISCO apparatus (cyclohexane:EtOAc).The title compound was obtained according to the General Procedure II, starting from 6-bromobenzoxazolone (500 mg, 2.34 mmol) and (4-fluorophenyl)boronic acid (490 mg, 3.50mmol). White solid (450 mg, 42%). 1H NMR (400 MHz, CDCI,) 6 7.08 (m, 3H), 7.33 (dd, J = 8.1, 1.6 Hz, 1H), 7.39 (d, J = 1.4 Hz, 1H), 7.47 -7.52 (m, 2H), 7.91 (s, 1H). MS (ESI) m/z: 228 [M-H].

19932-85-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,19932-85-5 ,6-Bromobenzo[d]oxazol-2(3H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; FONDAZIONE ISTITUTO ITALIANO DI TECNOLOGIA; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; UNIVERSITA’ DEGLI STUDI DI PARMA; PIOMELLI, Daniele; PIZZIRANI, Daniela; BACH, Anders; SCARPELLI, Rita; MELZIG, Laurin; MOR, Marco; (72 pag.)WO2015/173169; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

As a common heterocyclic compound, it belongs to benzoxazole compound, name is 2-(Bromomethyl)benzo[d]oxazole, and cas is 73101-74-3, its synthesis route is as follows.

(Step A-1) 53.2 mg of sodium hydride (as a 60% w/w dispersion in mineral oil) were added to a solution of 200.0 mg of 4-acetamido-3-methylphenol in 10 ml of dimethylformamide cooled in an ice-water bath. The resulting mixture was stirred at the same temperature for 5 minutes, and then 307.9 mg of 2-bromomethylbenzoxazole ?prepared as described in Example 28(a) above! were added. The temperature of the resulting mixture was elevated to room temperature and the mixture was stirred for 30 minutes. At the end of this time, the temperature of the reaction mixture was elevated to 50 C. and the mixture was stirred for a further 1.5 hours. At the end of this time, a saturated aqueous ammonium chloride solution was added to the reaction mixture and the resulting mixture was extracted with ethyl acetate. The resulting extract was washed consecutively with water and a saturated aqueous sodium chloride solution and then dried over anhydrous sodium sulfate. The solvent was then removed by evaporation under reduced pressure to give a crude crystalline solid which was purified by column chromatography through silica gel using a 3:1 by volume mixture of ethyl acetate and hexane as the eluent, to give 218.5 mg (yield 61%) of the title compound as a solid having a melting point of 160 C. Nuclear Magnetic Resonance Spectrum, (200 MHz, CDCl3) delta ppm: 7.78-7.74 (1H, multiplet); 7.58-7.51 (2H, multiplet); 7.39-7.34 (1H, multiplet); 6.92-6.84 (3H, multiplet); 5.30 (2H, singlet); 2.24 (3H, singlet); 2.18 (3H, singlet).

73101-74-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,73101-74-3 ,2-(Bromomethyl)benzo[d]oxazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Sankyo Company, Limited; US5736487; (1998); A;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Bromobenzo[d]oxazol-2(3H)-one, cas is 19932-85-5,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: General Procedure III: Synthesis of compounds of Formula II (Scheme 2b) VI, e.g. bromo-substituted 3H-l,3-benzoxazol-2-one, (1 eq.) was suspended in a 1:1 toluene/EtOH mixture (10 mL per mmol VI). The boronic acid VII (1.5 eq.) was added followed by aq. Na2C03 (2 M, 0.55 mL per mmol VI, 1.1 eq.). The resulting suspension was degassed under nitrogen for 10 min, followed by addition of tetrakis(triphenylphosphine) palladium(O) (0.1 eq.) and heating under microwave irradiation at 100 C for 30 min. The reaction mixture was diluted with EtOAc (40 mL per mmol VI), and water (40 mL per mmol VI) was added. The two phases were separated and the aqueous layer was extracted with EtOAc (2 chi 40 mL per mmol VI). The combined organic phases were dried over Na2S04, evaporated on celite, and the compound was purified by column chromatography using the Teledyne ISCO apparatus (cyclohexane:EtOAc).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-Bromobenzo[d]oxazol-2(3H)-one, 19932-85-5

Reference£º
Patent; FONDAZIONE ISTITUTO ITALIANO DI TECNOLOGIA; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; PIOMELLI, Daniele; PAGLIUCA, Chiara; PIZZIRANI, Daniela; BACH, Anders; REALINI, Natalia; DE VIVO, Marco; (112 pag.)WO2015/173168; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Bromobenzo[d]oxazol-2(3H)-one, cas is 19932-85-5,the benzoxazole compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 6-bromo-3H-1,3-benzoxazol-2-one (2.00 g, 9.35 mmol, Intermediate OY) in THF (50 mL) was added t-BuOK (1.26 g, 11.2 mmol). The reaction mixture was stirred at 0 C. for 0.5 hour. Subsequently, [1-[(4-methoxyphenyl)methyl]-2,6-dioxo-3-piperidyl] trifluoromethanesulfonate (4.81 g, 12.6 mmol, Intermediate IQ) in a solution of THF (30 mL) was added dropwise. The resulting reaction mixture was stirred at 20 C. for 0.5 hour under N2. On completion, the reaction mixture was quenched with saturated NH4Cl (100 mL), and extracted with ethyl acetate (100 mL). The combined organic layer was washed with brine (2¡Á100 mL), dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated in vacuo. The residue was purified by silica gel chromatography (PE:EA:DCM=5:1:2) to give the title compound (3.75 g, 90% yield) as a yellow solid. 1H NMR (400 MHz, CDCl3) delta 7.22-7.20 (d, J=8.0 Hz, 1H), 6.89-6.87 (d, J=8.0 Hz, 1H), 4.90-4.86 (m, 1H), 4.47-4.36 (m, 2H) 3.81 (s, 3H), 2.67-2.64 (m, 1H), 2.59-2.54 (m, 2H), 2.40-2.38 (m, 1H). LC-MS (ESI+) m/z 466.9 & 468.9 (M+Na)+.

The chemical industry reduces the impact on the environment during synthesis,19932-85-5,6-Bromobenzo[d]oxazol-2(3H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Kymera Therapeutics, Inc.; Mainolfi, Nello; Ji, Nan; Kluge, Arthur F.; Weiss, Matthew M.; Zhang, Yi; (1443 pag.)US2019/192668; (2019); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

In homogeneous catalysis, the catalyst is in the same phase as the reactant. The number of collisions between reactants and catalyst is at a maximum.In a patent, 151230-42-1, name is 6-Bromo-2-methylbenzo[d]oxazole, introducing its new discovery. Application In Synthesis of 6-Bromo-2-methylbenzo[d]oxazole

COMPOUNDS FOR TREATING SPINAL MUSCULAR ATROPHY

Provided herein are compounds, compositions thereof and uses therewith for treating spinal muscular atrophy.

We¡¯ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 151230-42-1, and how the biochemistry of the body works.Application In Synthesis of 6-Bromo-2-methylbenzo[d]oxazole

Reference£º
Benzoxazole – Wikipedia,
Benzoxazole | C7H5NO – PubChem

Chemistry is an experimental science, and the best way to enjoy it and learn about it is performing experiments. HPLC of Formula: C7H5BrN2O. Introducing a new discovery about 64037-07-6, Name is 5-Bromobenzo[d]oxazol-2-amine

TRICYCLIC PI3K INHIBITOR COMPOUNDS AND METHODS OF USE

Described herein are tricyclic compounds with phosphoinositide-3 kinase (PI3K) modulation activity or function having the Formula I structure: or stereoisomers, tautomers, or pharmaceutically acceptable salts thereof, and with the substituents and structural features described herein. Also described are pharmaceutical compositions and medicaments that include the Formula I compounds, as well as methods of using such PI3K modulators, alone and in combination with other therapeutic agents, for treating diseases or conditions that are mediated or dependent upon PI3K dysregulation.

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.HPLC of Formula: C7H5BrN2O, you can also check out more blogs about64037-07-6

Reference£º
Benzoxazole – Wikipedia,
Benzoxazole | C7H5NO – PubChem