Tag: M.W:200-300

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 6-bromo-3H- benzooxazol-2-one (47) (400 mg, 1.87 mmol, 1 eq), copper cyanide (3.3 g, 37 mmol, 20 eq), in DMF( 10 ml) was stirred at 175 C for 3 hours. The reaction mixture was diluted with ethyl acetate, filtered to remove the precipitated solid material, and the organic phase was washed with water, purified by flash chromatography to give 2-oxo-2,3-dihydro- benzooxazole-6-carbonitrile (48)., 19932-85-5

The synthetic route of 19932-85-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; CHEMOCENTRYX, INC.; WO2007/22257; (2007); A2;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[0156j Triethylamine (0.72 g, 1.0 mL, 7.1 mmol) was added to a stirring a mixture of 6- bromo-2benzoxazilinone (0.89 g, 4.2 mmol) and trityichioride (1.21 g, 4.4 mmol) in CH2C12 (10 mL) for a period of 10 mm. The reaction was monitored by TLC (silica gel) and concentrated after 1 h. The concentrate was diluted with water and sonicated to form a heterogeneous solution. The resulting off-white solid was suction filtered and dried to provide 1 -trityl-6-bromo-2- benzoxazilinone (2.0 g). LCMS: rt 9.45 mm (A), purity 96 %, MS (mle) 456 (MHj.

19932-85-5, As the paragraph descriping shows that 19932-85-5 is playing an increasingly important role.

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; SINGH, Rajinder; BHAMIDIPATI, Somasekhar; DING, Pingyu; PAYAN, Donald; GELMAN, Marina; KINSELLA, Todd; WO2015/157093; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

The benzoxazole compound, cas is 19932-85-5 name is 6-Bromobenzo[d]oxazol-2(3H)-one, mainly used in chemical industry, its synthesis route is as follows.,19932-85-5

Step 1: 6-bromo-3-methyl-1, 3-benzoxazol-2(3H)-one A mixture of 6-bromo-1,3-benzoxazol-2(3H)-one (Aldrich, catNo.697036: 0.32 g, 1.5 mmol), methyl iodide (0.28 mL, 4.5 mmol) and potassium carbonate (210 mg, 1.5 mmol) in acetone (3 mL) was heated to 80 C. and stirred for 3 h. The reaction mixture was cooled to room temperature then diluted with water and extracted with EtOAc. The combined extracts were dried over Na2SO4, filtered and concentrated. The residue was used in the next step without further purification. LC-MS calculated for C8H7BrNO2 (M+H)+: m/z=228.0. found 227.9.

As the rapid development of chemical substances, we look forward to future research findings about 19932-85-5

Reference£º
Patent; Incyte Corporation; He, Chunhong; Li, Zhenwu; Wu, Liangxing; Yao, Wenqing; Zhang, Fenglei; (84 pag.)US2016/289238; (2016); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.72752-81-9,Methyl 2-mercaptobenzo[d]oxazole-6-carboxylate,as a common compound, the synthetic route is as follows.,72752-81-9

To a suspension of compound 5.3 (320 g, 1.53 mol) and K2CO3 (276 g, 2 mol) in EtOAC (3 L) was added MeI (238.9 g, 1.68 mol) below 20 C. The mixture was stirred at room temperature for 12 hours. TLC (EtOAc/petroleum ether=1:3) indicated the reaction was complete. Water (2 L) was added to the mixture. The organic phase was separated, dried over Na2SO4 and concentrated to give 5.4 (320 g, 93.8%) as a pink solid.

As the paragraph descriping shows that 72752-81-9 is playing an increasingly important role.

Reference£º
Patent; TIBOTEC BVBA; US2010/305073; (2010); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem

19932-85-5, 6-Bromobenzo[d]oxazol-2(3H)-one is a benzoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: IV, e.g. bromo-substituted 3H-1,3-benzoxazol-2-one, (1 eq.) was suspended in a 1:1 toluene/EtOH mixture (10 mL per mmol IV). The boronic acid V (1.5 eq.) was added followed by aq. NaCO3 (2 M, 0.55 mL per mmcl IV, 1.1 eq.). The resulting suspension was degassed undernitrogen for 10 mm, followed by addition of Pd(PPh3)4 (0.1 eq.) and heating under microwave irradiation at 100 C for 30 mm. The reaction mixture was diluted with EtOAc (40 mL per mmcl IV), and water (40 mL per mmcl IV) was added. The two phases were separated and the aqueous layer was extracted with EtOAc (2 x 40 mL per mmcl IV). The combined organic phases were dried over Na2SO4, evaporated on silica, and the compound was purified by column chromatography using the Teledyne ISCO apparatus (cyclohexane:EtOAc).The title compound was obtained according to the General Procedure II, starting from 6-bromobenzoxazolone (500 mg, 2.34 mmol) and (4-fluorophenyl)boronic acid (490 mg, 3.50mmol). White solid (450 mg, 42%). 1H NMR (400 MHz, CDCI,) 6 7.08 (m, 3H), 7.33 (dd, J = 8.1, 1.6 Hz, 1H), 7.39 (d, J = 1.4 Hz, 1H), 7.47 -7.52 (m, 2H), 7.91 (s, 1H). MS (ESI) m/z: 228 [M-H]., 19932-85-5

As the paragraph descriping shows that 19932-85-5 is playing an increasingly important role.

Reference£º
Patent; FONDAZIONE ISTITUTO ITALIANO DI TECNOLOGIA; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; UNIVERSITA’ DEGLI STUDI DI PARMA; PIOMELLI, Daniele; PIZZIRANI, Daniela; BACH, Anders; SCARPELLI, Rita; MELZIG, Laurin; MOR, Marco; (72 pag.)WO2015/173169; (2015); A1;,
Benzoxazole – Wikipedia
Benzoxazole | C7H5NO – PubChem