Tag: M.W=300-400

Recommanded Product: 92-86-4. In 2019 GREEN CHEM published article about COVALENT TRIAZINE FRAMEWORKS; POROUS POLYMERS; PHOTOCATALYTIC ACTIVITY; CARBON-DIOXIDE; SURFACE-AREA; REDUCTION; CAPTURE; CONSTRUCTION; CONVERSION; PLATFORMS in [Dai, Chunhui; Liu, Bin] Natl Univ Singapore, Dept Chem & Biomol Engn, 4 Engn Dr 4, Singapore 117585, Singapore; [Zhong, Lixiang; Gong, Xuezhong; Zeng, Lei; Xue, Can; Li, Shuzhou] Nanyang Technol Univ, Sch Mat Sci & Engn, 50 Nanyang Ave, Singapore 639798, Singapore in 2019, Cited 40. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4.

Organic pi-conjugated polymers (CPs) have been intensively explored for a variety of critical photocatalytic applications in the past few years. Nevertheless, CPs for efficient CO2 photoreduction have been rarely reported, which is mainly due to the lack of suitable polymers with sufficient solar light harvesting ability, appropriate energy level alignment and good activity and selectivity in multi-electron-transfer photoreduction of CO2 reaction. We report here the rational design and synthesis of two novel triphenylamine (TPA) based conjugated microporous polymers (CMPs), which can efficiently catalyze the reduction of CO2 to CO using water vapor as an electron donor under ambient conditions without adding any co-catalyst. Nearly 100% selectivity and a high CO production rate of 37.15 mu mol h(-1) g(-1) are obtained for OXD-TPA, which is significantly better than that for BP-TPA (0.9 mu mol h(-1) g(-1)) as a result of co-monomer change from biphenyl to 2,5-diphenyl-1,3,4-oxadiazole. This difference could be mainly ascribed to the synergistic effect of a decreased optical band gap, improved interface charge transfer and increased CO2 uptake for OXD-TPA. This contribution is expected to spur further interest in the rational design of porous conjugated polymers for CO2 photoreduction.

About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Dai, CH; Zhong, LX; Gong, XZ; Zeng, L; Xue, C; Li, SZ; Liu, B or concate me.. Recommanded Product: 92-86-4

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

An article Inducing Social Self-Sorting in Organic Cages To Tune The Shape of The Internal Cavity WOS:000548610200001 published article about SELECTIVE FORMATION; SOLVENT; CHEMISTRY; PSEUDOPOTENTIALS; INTERIOR; ENTROPY in [Abet, Valentina; Little, Marc A.; Jones, Christopher D.; Wilson, Craig; Wu, Xiaofeng; Thorne, Michael F.; Bennison, Michael J.; Cui, Peng; Cooper, Andrew, I; Slater, Anna G.] Univ Liverpool, Dept Chem & Mat Innovat Factory, Crown St, Liverpool L69 7ZD, Merseyside, England; [Szczypinski, Filip T.; Santolini, Valentina; Jelfs, Kim E.] Imperial Coll London, Dept Chem, Mol Sci Res Hub, White City Campus, London W12 0BZ, England; [Evans, Robert] Aston Univ, Aston Inst Mat Res, Sch Engn & Appl Sci, Birmingham B4 7ET, W Midlands, England in 2020, Cited 99. Recommanded Product: 4,4′-Dibromobiphenyl. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4

Many interesting target guest molecules have low symmetry, yet most methods for synthesising hosts result in highly symmetrical capsules. Methods of generating lower symmetry pores are thus required to maximise the binding affinity in host-guest complexes. Herein, we use mixtures of tetraaldehyde building blocks with cyclohexanediamine to access low-symmetry imine cages. Whether a low-energy cage is isolated can be correctly predicted from the thermodynamic preference observed in computational models. The stability of the observed structures depends on the geometrical match of the aldehyde building blocks. One bent aldehyde stands out as unable to assemble into high-symmetry cages-and the same aldehyde generates low-symmetry socially self-sorted cages when combined with a linear aldehyde. We exploit this finding to synthesise a family of low-symmetry cages containing heteroatoms, illustrating that pores of varying geometries and surface chemistries may be reliably accessed through computational prediction and self-sorting.

About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Abet, V; Szczypinski, FT; Little, MA; Santolini, V; Jones, CD; Evans, R; Wilson, C; Wu, XF; Thorne, MF; Bennison, MJ; Cui, P; Cooper, AI; Jelfs, KE; Slater, AG or concate me.. Recommanded Product: 4,4′-Dibromobiphenyl

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

COA of Formula: C12H8Br2. Recently I am researching about LIGHT-EMITTING-DIODES; EFFICIENT; DEVICE; ADDUCT; LAYERS, Saw an article supported by the National Research Foundation of the Ministry of Science and ICT [NRF-2018R1A5A1025594]; Fundamental Research Program of the Korea Institute of Materials Science (KIMS) [PNK 6100]. Published in ROYAL SOC CHEMISTRY in CAMBRIDGE ,Authors: Kwon, H; Reddy, SS; Arivunithi, VM; Jin, H; Park, HY; Cho, W; Song, M; Jin, SH. The CAS is 92-86-4. Through research, I have a further understanding and discovery of 4,4′-Dibromobiphenyl

A facile and less expensive hole transport material is essential to enhance the power conversion efficiency (PCE) of perovskite solar cells (PSC) without compromising the ambient stability. Here, we designed and synthesized a new class of HTM by introducing donor-pi-acceptor (D-pi-A). The HTM was synthesized by combining the moieties of triphenylamine, biphenyl and oxadiazole derivatives as electron donating, pi-spacer and electron withdrawing moieties, respectively, named 4 ”’-(5-(4-(hexyloxy)phenyl)-1,3,4-oxadiazol-2-yl)-N,N-bis(4-methoxyphenyl)-[1,1′:4′,1 ”:4 ”,1 ”’-quaterphenyl]-4-amine (TPA-BP-OXD). The pi-pi conjugation is increased by introducing the biphenyl pi-spacer. The HTM was terminated with an OXD-based moiety and framed as a D-pi-A-based HTM that trigged improvement in the charge transportation properties due to its pi-pi interactions. We rationally investigated the HTM by characterizing its photophysical, thermal, electrochemical, and charge transport properties. The great features of the HTM stimulated us to explore it on rigid and flexible substrates as a dopant-free HTM in planar inverted-perovskite solar cells (i-PSCs). The device performance in solution processed dopant-free HTM based i-PSC devices on both rigid and flexible substrates showed PCEs of 15.46% and 12.90%, respectively. The hysteresis is negligible, which is one of the most effective results based on a TPA-BP-OXD HTM in planar i-PSCs. The device performance and stability based on the TPA-BP-OXD HTM are better due to higher extraction and transportation of holes from the perovskite material, reduced charge recombination at the interface, and enhanced hydrophobicity of the HTM to compete for a role in enhancing the stability. Overall, our findings demonstrate the potentiality of the TPA-BP-OXD based HTM in planar i-PSCs.

About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Kwon, H; Reddy, SS; Arivunithi, VM; Jin, H; Park, HY; Cho, W; Song, M; Jin, SH or concate me.. COA of Formula: C12H8Br2

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Safety of 4,4′-Dibromobiphenyl. Recently I am researching about THIENOTHIOPHENE; POLYMERS; THIOPHENE; MOIETIES; UNITS, Saw an article supported by the Unsped Global Lojistik, Turkey; TUBITAKTurkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [2211A BIDEP/TUBITAK]; Higher Education Council of Turkey (YOK)Ministry of National Education – Turkey [PhD 100/2000 YOK]. Published in WILEY in HOBOKEN ,Authors: Isci, R; Gunturkun, D; Yalin, AS; Ozturk, T. The CAS is 92-86-4. Through research, I have a further understanding and discovery of 4,4′-Dibromobiphenyl

Two novel copolymers of 4-thieno[3,2-b]thiophen-3-ylbenzonitrile (TT-CN), possessing electron withdrawing cyano moiety, with anthracene (P1) and biphenyl (P2) were prepared via Suzuki coupling. Optic, electronic, and thermal properties of the copolymers were investigated through UV-Vis spectroscopy, cyclic voltammetry, gel permeation chromatography, and thermal gravimetric analysis. The polymers with anthracene and biphenyl had electronic band gaps of 2.01 and 1.90 eV, respectively. Both polymers demonstrated excellent large Stokes shifts of 101 (anthracene) and 105 nm (biphenyl) as well as very good thermal properties. As they had good optical, electronic, and thermal properties, they are promising candidates for electronic applications.

Safety of 4,4′-Dibromobiphenyl. About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Isci, R; Gunturkun, D; Yalin, AS; Ozturk, T or concate me.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Recently I am researching about 2-DIMENSIONAL GAS-CHROMATOGRAPHY; SOLID-PHASE DISPERSION; GC-MS QUANTIFICATION; SUSPECTED ALLERGENS; QUANTITATIVE-ANALYSIS; VOLATILE COMPOUNDS; DYNAMIC HEADSPACE; SCENTED TOYS; VALIDATION; PRODUCTS, Saw an article supported by the Association Nationale de la Recherche et de la TechnologieFrench National Research Agency (ANR). Recommanded Product: 92-86-4. Published in WILEY in HOBOKEN ,Authors: Remy, PA; Peres, C; Dugay, J; Corbi, E; David, N; Vial, JM. The CAS is 92-86-4. Through research, I have a further understanding and discovery of 4,4′-Dibromobiphenyl

Two high-resolution mass spectrometers (HRMS) with different analyzer technology, Orbitrap and hybrid quadrupole time-of-flight (QTOF), were compared with a low-resolution mass spectrometer, quadrupole, to analyse a set of 35 difficult allergens. These difficult allergens are commonly coeluted fragrance allergens with matrix compounds, using standard gas chromatography-mass spectrometer conditions, from the extended list of the Scientific Committee on Consumer Safety (SCCS). Although the fundamental role of chromatographic separation has been demonstrated many times, the aim of this work is to demonstrate the benefits of high-resolution. The added value of high-resolution was illustrated in both a qualitative and a quantitative way. For qualitative aspect, the high resolution extracted ion signals of these two detectors were compared with the low-resolution extracted ion signals. About 50% of the coeluted cases observed with the low-resolution detector are easily resolved by the two high-resolution detectors. For the quantitative aspect, an accuracy profile methodology and a performance metric were used to propose an overall evaluation. The Orbitrap mass spectrometer demonstrated a better overall performance, while the QTOF presented similar or even lower quantification performances than the quadrupole on the set of analysed fragrances.

Recommanded Product: 92-86-4. About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Remy, PA; Peres, C; Dugay, J; Corbi, E; David, N; Vial, JM or concate me.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Recommanded Product: 4,4′-Dibromobiphenyl. I found the field of Materials Science; Physics very interesting. Saw the article In search of efficient solubilizing groups for liquid and luminescent oligo(phenylene-thiophene) chromophores published in 2020, Reprint Addresses Luponosov, YN (corresponding author), Russian Acad Sci, Enikolopov Inst Synthet Polymer Mat, Prafsoyuznaya St 70, Moscow 117393, Russia.. The CAS is 92-86-4. Through research, I have a further understanding and discovery of 4,4′-Dibromobiphenyl.

In this work, the synthesis of oligomers having a rigid conjugated 4,4 ‘-bis(2-thienyl)biphenyl fragment end-capped with various types of solubilizing groups (SGs), such as either alkyl or alkylsilyl or alkyl-oligodimethylsiloxane, has been reported. The comprehensive study of their thermal and optical properties as well as rheology in comparison to model highly crystalline oligomers with simple either hexyl or trimethylsilyl SGs allowed us to elucidate structure-property correlations and find the most powerful type of SG in terms of liquefaction for them. It was revealed that oligomers with long and branched alkyl SGs still retain high crystallinity, whereas oligomers with alkyl-oligodimethylsiloxane SGs combine very low glass transition temperatures (up to -111 degrees C) with a liquid-crystalline behaviour. The alkylsilyl SGs were found to be the most efficient, since the oligomers end-capped with trihexyl- and tri(2-butyloctyl)silyl SGs are liquid and have low values of both the glass transition temperature (up to -60 degrees C) and viscosity (up to 1.94 Pa s). All the oligomers prepared have similar optical absorption/luminescence spectra and high values of photoluminescence quantum yield in solution (90-95%) without a significant impact of the SG type. In the neat films, the type of SG has a huge impact on the shape and maxima of the absorption and luminescence spectra as well as the photoluminescence efficiency. Among this series of molecules, oligomers with alkylsilyl SGs demonstrate the highest values of photoluminescence quantum yield in the neat form (24-61%) and close to the solution optical characteristics, which indicates their strong capability to suppress aggregation of molecules in the bulk. Thus, for the first time liquid luminescent thiophene/phenylene co-oligomers were reported and the solubilizing capabilities of some of the most promising types of SG were comprehensively investigated and compared to each other. The results obtained can be used as a guideline for the design of functional materials based on conjugated oligomers with a tunable and controllable phase behaviour, solubility and optical properties in the neat state.

About 4,4’-Dibromobiphenyl, If you have any questions, you can contact Luponosov, YN; Balakirev, DO; Dyadishchev, IV; Solodukhin, AN; Obrezkova, MA; Svidchenko, EA; Surin, NM; Ponomarenko, SA or concate me.. Recommanded Product: 4,4′-Dibromobiphenyl

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Recommanded Product: 92-86-4. Rao, JC; Zhao, CY; Wang, YP; Bai, KY; Wang, SM; Ding, JQ; Wang, LX in [Rao, Jiancheng; Zhao, Chenyang; Bai, Keyan; Wang, Shumeng; Ding, Junqiao; Wang, Lixiang] Chinese Acad Sci, Changchun Inst Appl Chem, State Key Lab Polymer Phys & Chem, Changchun 130022, Peoples R China; [Rao, Jiancheng; Bai, Keyan] Univ Chinese Acad Sci, Beijing 100049, Peoples R China; [Zhao, Chenyang; Ding, Junqiao; Wang, Lixiang] Univ Sci & Technol China, Hefei 230026, Peoples R China; [Wang, Yanping] Changchun Univ Sci & Technol, Sch Mat Sci & Engn, Changchun 130022, Peoples R China published Achieving Deep-Blue Thermally Activated Delayed Fluorescence in Nondoped Organic Light-Emitting Diodes through a Spiro-Blocking Strategy in 2019, Cited 40. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4.

A deep-blue thermally activated delayed fluorescence (TADF) emitter TXADO-spiro-DMACF has been reported for nondoped organic light-emitting diodes (OLEDs) by integrating an appropriate blocking unit with the donor (D)-acceptor (A)-donor (D)-type TADF emitter via a spiro linkage. Benefiting from the characteristic perpendicular arrangement, the intermolecular interactions are expected to be weakened to some degree. As a result, TXADO-spiro-DMACF shows a very small bathochromic shift of 8 nm associated with a narrowed full width at half maximum of 54 nm on going from solution to the film. The corresponding nondoped device successfully achieves a bright deep-blue emission, revealing Commission Internationale de l’Eclairage coordinates of (0.16, 0.09) and a peak external quantum efficiency of 5.3% (5.3 cd/A, 5.9 lm/W). The results clearly indicate that spiro-blocking is a promising strategy to develop deep-blue TADF emitters capable of nondoped OLEDs.

Recommanded Product: 92-86-4. About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Rao, JC; Zhao, CY; Wang, YP; Bai, KY; Wang, SM; Ding, JQ; Wang, LX or concate me.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Quality Control of 4,4′-Dibromobiphenyl. In 2019 ACS APPL POLYM MATER published article about MICROWAVE-ASSISTED POLYCONDENSATION; LIGHT-EMITTING-DIODES; ELECTROLUMINESCENCE; OXIDATION; PURE in [Kodama, Shunsuke] Hitachi Chem Co Ltd, Adv Technol Res & Dev Ctr Shimodate, 1919 Morisoejima, Chikusei City, Ibaraki 3080861, Japan; [Kuwabara, Junpei; Jiang, Xin; Kanbara, Takaki] Univ Tsukuba, Grad Sch Pure & Appl Sci, Tsukuba Res Ctr Energy Mat Sci TREMS, 1-1-1 Tennodai, Tsukuba, Ibaraki 3058573, Japan; [Fukushima, Iori] Hitachi Chem Co Ltd, Adv Technol Res & Dev Ctr, 48 Wadai, Tsukuba, Ibaraki 3004247, Japan in 2019, Cited 31. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4.

Poly(arylamine)s were synthesized by poly-condensation of 4-n-octylaniline with 4,4′-dibromobiphenyl using the Buchwald-Hartwig aryl amination. Both the NH and the Br end groups were properly modified upon addition of an end-capping reagent in an appropriate ratio. The synthesized polymers contained many impurities, such as Pd, Br, and Cl, which decrease organic light-emitting diode performance. An investigation to reduce the impurities in the polymer showed that the purification solvent plays the key role in reducing the concentration of impurities in the polymer; purification with a nonchlorinated solvent, anisole, provided a highly pure poly(arylamine) even with a simple purification procedure. Moreover, the highly purified polymer material improved carrier mobility in hole-only devices.

About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Kodama, S; Kuwabara, J; Jiang, X; Fukushima, I; Kanbara, T or concate me.. Quality Control of 4,4′-Dibromobiphenyl

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

Recently I am researching about (Q)SAR APPLICATION TOOLBOX; ACUTE TOXICITY; STRUCTURAL ALERTS; CLASSIFICATION; MUTAGENICITY; TOXTREE; PREDICTION; CHEMICALS; PRODUCTS, Saw an article supported by the National Research Council of Science & Technology (NST) grant by the South Korean government (MSIP) [CAP-17-01-KIST Europe]; [11911]. Published in JOURNAL OF VISUALIZED EXPERIMENTS in CAMBRIDGE ,Authors: Bohlen, ML; Jeon, HP; Kim, YJ; Sung, B. The CAS is 92-86-4. Through research, I have a further understanding and discovery of 4,4′-Dibromobiphenyl. Product Details of 92-86-4

Computational analyses of toxicological processes enables high-throughput screening of chemical substances and prediction of their endpoints in biological systems. In particular, quantitative structure-activity relationship (QSAR) models have been increasingly applied to assess the environmental effects of a plethora of toxic materials. In recent years, some more highlighted types of toxicants are endocrine disruptors (EDs, which are chemicals that can interfere with any hormone-related metabolism). Because EDs may significantly affect animal development and reproduction, rapidly predicting the adverse effects of EDs using in silico techniques is required. This study presents an in silico method to generate prediction data on the effects of representative EDs in aquatic vertebrates, particularly fish species. The protocol describes an example utilizing the automated workflow of the QSAR Toolbox software developed by the Organization for Economic Co-operation and Development (OECD) to enable acute ecotoxicity predictions of EDs. As a result, the following are determined: (1) calculation of the numerical correlations between the concentration for 50% of lethality (LC50) and octanol-water partition coefficient (K-ow), (2) output performances in which the LC50 values determined in experiments are compared to those generated by computations, and (3) the dependence of estrogen receptor binding affinity on the relationship between K-ow and LC50.

Product Details of 92-86-4. About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Bohlen, ML; Jeon, HP; Kim, YJ; Sung, B or concate me.

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem

In 2019 NEW J CHEM published article about TRINUCLEAR COPPER(I) ACETYLIDES; N-HETEROCYCLIC CARBENES; CARBONYL-COMPLEXES; CLUSTERS; ELECTROCHEMISTRY; NANOPARTICLES; CHEMISTRY; TE; CONSTRUCTION; SPECTROSCOPY in [Shieh, Minghuey; Liu, Yu-Hsin; Wang, Chih-Chin; Jian, Huan; Lin, Chien-Nan; Chen, Yen-Ming; Huang, Chung-Yi] Natl Taiwan Normal Univ, Dept Chem, Taipei 11677, Taiwan in 2019, Cited 80. The Name is 4,4′-Dibromobiphenyl. Through research, I have a further understanding and discovery of 92-86-4. Product Details of 92-86-4

A novel family of N-heterocyclic carbene (NHC)-incorporated Se-Fe-Cu compounds, bis-1,3-dimethylimidazol-2-ylidene (bis-Me-2-imy)-containing compound [(mu(4)-Se)Fe-3(CO)(9){Cu(Me-2-imy)}(2)] (2), bis-N-methyl- or bis-N-isopropyl-substituted benzimidazol-2-ylidene (bis-Me-2-bimy or bis-Pr-i(2)-bimy)-incorporated compounds [(mu(4)-Se)Fe-3(CO)(9){Cu(Me-2-bimy)}(2)] (3) or [(mu(4)-Se)Fe-3(CO)(9){Cu(Pr-i(2)-bimy)}(2)] (4), and a bis-1,3-dimethyl-4,5-dichloroimidazol-2-ylidene (bis-Me-2-Cl-2-imy)-containing compound [(mu(3)-Se)Fe-3(CO)(9){Cu(Me-2-Cl-2-imy)}(2)] (5), were synthesized in moderate yields in facile one-pot reactions of the ternary pre-designed compound [(mu(3)-Se)Fe-3(CO)(9){Cu(MeCN)}(2)] (1) with the corresponding imidazolium salts and (KOBu)-Bu-t in THF in an ice-water bath. Single-crystal X-ray analyses revealed that the Me-2-imy compound 2 or the Me-2-bimy compound 3 each exhibited a trigonal bipyramidal SeFe3(CO)(9)Cu geometry with an Fe2Cu plane further capped by a Cu(Me-2-imy) or Cu(Me-2-bimy) fragment, respectively, with one long Cu-Cu covalent bond. In addition, compound 4 also comprised a trigonal bipyramidal SeFe3(CO)(9)Cu core structure, but the second Cu(Pr-i(2)-bimy) group bridged the equatorial Fe-Fe edge with two unbonded Cu atoms, due to the presence of a sterically bulky Pr-i(2)-bimy fragment. On the other hand, the strong electron-withdrawing chloro-containing NHC compound 5 showed a comparatively open tetrahedral SeFe3(CO)(9) metal core, where two Fe-Fe edges each were further bridged by a Cu(Me-2-Cl-2-imy) fragment. Due to the nonclassical C-H center dot center dot center dot O(carbonyl) hydrogen bonds between the CO groups of the SeFe3(CO)(9)Cu-2 core and CH moieties of the neighboring NHC ligands, both compounds 2 and 3 comprised a one-dimensional network, while compounds 4 and 5 each were made up of a two-dimensional framework in the solid state, which efficiently enhanced the stability of these Se-Fe-Cu NHC compounds. Importantly, all of these synthesized Se-Fe-Cu NHC compounds 2-5 had pronounced catalytic activities for the homocoupling of arylboronic acids with high catalytic yields. Finally, these Se-containing Fe-Cu NHC compounds further represented excellent models for studying chalcogen effects in comparison to their Te analogs, as demonstrated by their catalytic performances and electrochemical behaviors, and by DFT calculations.

About 4,4′-Dibromobiphenyl, If you have any questions, you can contact Shieh, MH; Liu, YH; Wang, CC; Jian, H; Lin, CN; Chen, YM; Huang, CY or concate me.. Product Details of 92-86-4

Reference:
Benzoxazole – Wikipedia,
,Benzoxazole | C7H5NO – PubChem